Simulation Evaluation of a Novel Ice-Melting Sprinkling Technique for Blade
Gang Lei,Guohao Li,Fang Feng
DOI: https://doi.org/10.3390/coatings13101752
IF: 3.236
2023-01-01
Coatings
Abstract:The blades of some airborne equipment are prone to icing under supercooled cloud conditions. In this paper, we propose an anti-deicing spray method to prevent blades from icing at low temperatures. Using computational fluid dynamics modeling and orthogonal experimental methods, we investigated the effects of the blade angle of attack, inlet wind speed, and nozzle mass flow rate on the thickness and coverage of the liquid layer of spray material and examined the use of deflectors in this study. We found the magnitude and change rule of the influence of the previously mentioned parameters on the liquid film thickness and coverage of sprayed material to be the nozzle mass flow rate is greater than the blade angle of attack and greater than the inlet wind speed. Under the optimal combination of conditions of α = 30°, u0 = 6 m/s, and Q = 0.003 kg/s, the liquid film thickness was maximized, and the liquid film thickness was 0.037 mm; under the optimal combination of conditions of α = 60°, u0 = 6 m/s, and Q = 0.003 kg/s, the liquid film coverage was maximized, and the liquid film coverage was 99.81%. The anti-deicer spraying method proposed herein for use on blades is effective when considered from a number of perspectives. It provides an innovative and feasible solution to the wind turbine blade freezing problem. However, the method must be explored and modified to maximize its chances of general application, and other factors must also be considered to fully optimize the sprinkler de-icing technique to improve the performance and reliability of blades.