Abstract:This paper documents an experimental study on two-phase flow regimes and frictional pressure drop characteristics in a particulate (porous) bed packed with multidiameter (1.5-, 3-, and 6-mm) glass spheres. The experimental results provide new data to validate/develop hydrodynamic models for coolability analysis of debris beds formed in fuel-coolant interactions during a postulated severe accident. The POMECO-FL test facility is employed to perform the experiment, with the spheres packed in a test section of 90 nun diameter and 635 mm height. The pressure drops are measured for air/water two-phase flow through the packed bed, and flow patterns are obtained by means of visual observations. Meanwhile, local void fraction in the center of the bed is measured by a microconductive probe.The experimental results show that the frictional pressure drop of single-phase flow through the bed can be predicted by the Ergun equation, if the area mean diameter of the particles is chosen in the calculation. Given the so-determined effective particle diameter, the estimation of the Reed model for two-phase flow pressure gradient in the bed has a good agreement with the experimental data. The characteristic's of the local void fraction can be used to predict flow pattern and mean void fraction. It is observed that slug flow prevails when the mean void fraction is <0.5, whereas annular flow dominates after the mean void fraction is >0.7. If the effective particle diameter is further used as an influential parameter in flow pattern identification, the observed flow regimes of two-phase flow in porous media are well predicted by the existing flow pattern map.

EXPERIMENTAL INVESTIGATION ON PRESSURE DROPS IN FIXED POROUS BEDS PACKED WITH SAND PARTICLES

Investigation of pressure drop in a cocurrent downflow three-phase moving bed

Experimental study on pressure drop of packed beds with binary sintered ore particle mixtures

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Pressure drops of single/two-phase flows through porous beds with multi-sizes spheres and sands particles

Wall Effects on the Pressure Drop in Packed Beds of Irregularly Shaped Sintered Ore Particles

Experimental Study on the Effective Particle Diameter of a Packed Bed with Non-Spherical Particles

Two-Phase Flow Resistance and Interfacial Drag in Packed Beds

Pressure Drops and Model Modification for Two-Phase Flow in Porous Beds with Coarse Particles

Single Phase And Two-Phase Flow Pressure Drop In Pebble Beds

Determination of Pressure Drop for Air Flow Through Sintered Metal Porous Media Using A Modified Ergun Equation

An Experimental Study on Two-Phase Flow Resistances and Interfacial Drag in Packed Porous Beds

Experimental Study of Two-Phase Flow Regime and Pressure Drop in A Particulate Bed Packed with Multidiameter Particles

Pressure Drop in Packed Beds with Horizontally or Vertically Stratified Structure

Experimental and Numerical Studies on the Two-Dimensional Flow Characteristics in the Radially Stratified Porous Bed

Frictional Pressure Drop Characteristics of Air Flow Through Sinter Bed Layer in Vertical Tank

The Investigation of Pressure Drop in Moving-Beds

A Pore Network Model for Calculating Pressure Drop in Packed Beds of Arbitrary‐shaped Particles

EXPERIMENTAL STUDY ON AIR-WATER TWO-PHASE FLOW PATTERNS AND PRESSURE DROP IN PEBBLE BEDS

Research on Pressure Drop in Cir culating Fluidized Beds

Flow Characteristics of Gas-solid Two Phase Flowing in the Cross Moving Bed