Abstract:Reasonable cutting edge preparation can eliminate microscopic defects and improve the performance of a cutting tool. The flexible fiber-assisted shear thickening polishing method was used for the preparation of cemented carbide insert cutting edge. The influences of the polishing angle and polishing speed on the cutting edge preparation process were investigated, and the cutting edge radius and K-factor were employed as evaluation indexes to evaluate the edge shape. A prediction model of the cutting edge radius was also established using the mathematical regression method. The results show that the polishing angle has a more significant effect on the cutting edge radius. The cutting edge preparation efficiency is the highest under the polishing angle of 10°, and the cutting edge radius increased from the 15 ± 2 μm to 110 ± 5 μm in 5 min. The cutting edge shape can be controlled by adjusting the polishing angle, and the K-factor varies from 0.14 ± 0.03 to 0.56 ± 0.05 under the polishing angle (from −20° to 20°). The polishing speed has a less effect on the cutting edge radius and shape, but increasing the polishing speed within a certain range can improve the efficiency of cutting edge preparation. The flank face roughness decreased from the initial Ra 163.1 ± 10 nm to Ra 5.2 ± 2 nm at the polishing angle of −20°, which is the best polishing angle for the flank face surface roughness. The ANOVA method was employed to evaluate the effective weight of the polishing angle and polishing speed on preparation efficiency. The polishing angle (86.79%) has the more significant influence than polishing speed (13.21%) on the cutting edge preparation efficiency. The mathematical regression method was used to establish the model of the prediction of the cutting edge radius with polishing angle and speed, and the models were proved rationally. The results indicate that the FF-STP is an effective method for the high consistency preparation of cemented carbide insert cutting edge.

Preparation of Nanotwinned Cbn Cutting Edge by Combining Mechanical Lapping and Ion Beam Polishing

Binderless Layered BN Toughened Cbn for Ultra-precision Cutting

Material Removal Mechanism of Nanotwinned Cubic Boron Nitride by Femtosecond Laser Ablation

Cutting performance of the nanotwinned cBN tool in nano-cutting of Ni-Cr-Fe alloy

Small onion-like BN leads to ultrafine-twinned cubic BN

Using Pulse Laser Processing to Shape Cutting Edge of PcBN Tool for High-Precision Turning of Hardened Steel

Nanotwinned diamond cutting tool processed by femtosecond pulsed laser milling with trochoidal trajectory

Cutting performance of cubic boron nitride-coated tools in dry turning of hardened ductile iron

Edge Sharpening and Surface Modification of PcBN Cutting Tool by Pulsed Laser Grinding

Ultrasonic Deposition of Carbon Nanotubes on Polycrystalline Cubic Boron Nitride Composites

Picosecond laser processing of polycrystalline cubic boron nitride — A method to examine the ablation behavior of a high cubic boron nitride content grade material

Ultrahard Nanotwinned Cubic Boron Nitride.

Preparation of Cemented Carbide Insert Cutting Edge by Flexible Fiber-Assisted Shear Thickening Polishing Method

Mechanical property and cutting performance of CNTs reinforced cBN cutting tools by spark plasma sintering

Ultrahard stitching of nanotwinned diamond and cubic boron nitride in C 2 -BN composite

Self-sharpening property of porous metal-bonded aggregated cBN wheels during the grinding of Ti–6Al–4V alloys

Wear study of CBN tools in laser ultrasonic composite cutting of cemented carbide

Laser ablation and processing of polycrystalline cubic boron nitride cutting tool material

Wear mechanism of nanotwinned cBN tools in nano-cutting Ni-Cr-Fe alloy by molecular dynamics simulation

Decrease of Fib-Induced Lateral Damage for Diamond Tool Used in Nano Cutting

Effect of Deposition Parameters on Micromechanical Properties and Machining Performance of CrN Coating for Wet Finish Turning of Ti6Al4V Alloy