Abstract:Thin-ply composite failure modes also significantly differ from conventional ply composite failure modes, with the final failure mechanism switching from irregular progressive failure to direct fracture characterized by a uniform fracture with the reduction of the ply thickness. When open holes and bolt joints are involved, thin-ply-laminated composites exhibit more complex stress states, damage evolution, and failure modes. Compared to the experimental study of thin-ply-laminated composite-bolted joints, there are few reports about numerical analysis. In order to understand the damage evolution and failure mechanism of thin-ply-laminated composites jointed by single-lap bolt, a progressive damage model based on three-dimensional (3D) LaRC failure criterion combined with cohesive element is constructed. Through an energy-based damage evolution method, this model can capture some significant mechanical characteristics in thin-ply-laminated structures, such as the in situ effect, delamination inhibition, and fiber compressive kinking failure. The comparisons between the numerical predictions and experimental observations are made to verify the accuracy of the proposed model. It is found that the predicted stress-displacement curves, failure modes, damage morphologies, etc., are consistent with the experimental results, indicating that the presented progressive damage analysis method displays excellent accuracy. The predicted stress at the onset of delamination is 50% higher than that of the conventional thick materials, which is also consistent with experimental results. Moreover, the numerical model provides evidence that the microstructure of thin-ply-laminated composite performs better in uniformity, which is more conducive to inhibiting the intra-layer damage and the expansion of delamination damage between layers. This study on the damage inhibition mechanism of thin-ply provides a potential analytical tool for evaluating damage tolerance and bearing capabilities in thin-ply-laminated composite-bolted joints.

Experimental Study and DEM Modelling of Bolted Composite Lap Joints Subjected to Tension

Failure analysis and experimental study on bolted composite joints based on continuum damage mechanics

Experimental Investigation and Numerical Simulation of Bonded, Bolted, and Hybrid Joints in CFRP Laminates Under Tensile Loading

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Experiment and simulation study on bonded, bolted and hybrid bolted/bonded joints of textile CFRP using bimodulus constitutive model

Experimental and Numerical Study on Failure Behaviors of Composite Grid Stiffeners under Tensile and Flexural Loading

Computational modelling of postbuckling behavior of composite T-stiffened panels with different bonding methods

Behavior of hybrid bonded/bolted GFRP single-lap joint under static tensile loading: An experimental and numerical study

Experimental and Numerical Analysis of Bolted Repair for Composite Laminates with Delamination Damage

Investigation on the Progressive Damage and Bearing Failure Behavior of Composite Laminated Bolted Joints under Tension

Experimental Investigation of Double-Lap Bolted Composite Joints with Different Outer Plates Subjected to Bending Loads

Modeling Progressive Damage and Failure of Single-Lap Thin-Ply-Laminated Composite-Bolted Joint Using LaRC Failure Criterion

A Multiscale Modeling and Experimental Study on the Tensile Strength of Plain-Woven Composites with Hybrid Bonded–Bolted Joints

A Combined Experimental and Computational Analysis of Failure Mechanisms in Open-Hole Cross-ply Laminates under Flexural Loading

Experimental and numerical investigation on failure behavior of hybrid bonded/bolted GFRP single-lap joints under static shear loading

High-fidelity Simulations of Multiple Fracture Processes in a Laminated Composite in Tension

Experimental and numerical study on the tensile failure behavior of toughened-interlayer composite laminates with automated fiber placement (AFP) induced gap and overlap defects

THE STUDY ON TESTS AND NUMERICAL SIMULATION OF CRACK PROPAGATION PROBLEM IN DELAMINATION FAILURE OF COMPOSITE LAMINATED PLATE

Bolted steel to laminated timber and glubam connections: Axial behavior and finite-element modeling

Numerical study on failure behavior of open-hole composite laminates based on LaRC criterion and extended finite element method

Experimental Data on Fracture of Open-Hole Composite Laminates Subjected to Tension Loading