Abstract:In this paper, we present the design and measured performance of a novel cryogenic motor based on a superconducting magnetic bearing (SMB). The motor is tailored for use in millimeter-wave half-wave plate (HWP) polarimeters, where a HWP is rapidly rotated in front of a polarization analyzer or polarization-sensitive detector. This polarimetry technique is commonly used in cosmic microwave background polarization studies. The SMB we use is composed of fourteen yttrium barium copper oxide (YBCO) disks and a contiguous neodymium iron boron (NdFeB) ring magnet. The motor is a hollow-shaft motor because the HWP is ultimately installed in the rotor. The motor presented here has a 100 mm diameter rotor aperture. However, the design can be scaled up to rotor aperture diameters of approximately 500 mm. Our motor system is composed of four primary subsystems: (i) the rotor assembly, which includes the NdFeB ring magnet, (ii) the stator assembly, which includes the YBCO disks, (iii) an incremental encoder, and (iv) the drive electronics. While the YBCO is cooling through its superconducting transition, the rotor is held above the stator by a novel hold and release mechanism. The encoder subsystem consists of a custom-built encoder disk read out by two fiber optic readout sensors. For the demonstration described in this paper, we ran the motor at 50 K and tested rotation frequencies up to approximately 10 Hz. The feedback system was able to stabilize the rotation speed to approximately 0.4%, and the measured rotor orientation angle uncertainty is less than 0.15°. Lower temperature operation will require additional development activities, which we will discuss.

Cryogenic Goniometer for Measurements in Pulsed Magnetic Fields Fabricated Via Additive Manufacturing Technique

Thermal Expansion and Magnetostriction Measurements at Cryogenic Temperature Using the Strain Gauge Method

Design of a Cryogenic Giant Magnetostrictive Actuator Using HTS

Development of a load frame for neutron diffraction and fluorescent thermometry at cryogenic temperature

Design, Fabrication and Measurement of a 3 T Cryogen-Free Animal MRI Superconducting Magnet

Printing Air-Stable High- T c Molecular Magnet with Tunable Magnetic Interaction

A large-diameter hollow-shaft cryogenic motor based on a superconducting magnetic bearing for millimeter-wave polarimetry

Design of Adjustable Homogeneous Region Cryofree Conduction-Cooled Superconducting Magnet for Gyrotron

Printing Air-Stable High-Tc Molecular Magnet with Tunable Magnetic Interaction

An ultra-compact low temperature scanning probe microscope for magnetic fields above 30 T

Computational modelling of a triaxial vibrating sample magnetometer

A novel device for the measurement of the mechanical and magnetic axes of superconducting magnet assemblies for accelerators

Low temperature and high magnetic field performance of a commercial piezo-actuator probed $via$ laser interferometry

Design and Implementation of a Thin Film Tensile Testing Apparatus for Cryogenic Applications

Magnetostriction measurements at milli-kelvin temperatures using a Fabry–Pérot interferometer

Influence of Powder Feedstock Characteristics on Extrusion-based 3D Printing of Magnetocaloric Structures

Construction of a cryogenic dual scanner magnetic force microscope equipped with piezoresistive cantilever

Compact Magnetic Force Microscope (MFM) System in a 12 T Cryogen-Free Superconducting Magnet

Measurement of the angle dependence of magnetostriction in pulsed magnetic fields using a piezoelectric strain gauge

Cryogen free spin polarized scanning tunneling microscopy and magnetic exchange force microscopy with extremely low noise

CrO X N Y Thin Film Temperature Sensors for High-Precision Cryogenic Measurement in Strong Magnetic Field