Abstract:Precision time synchronization between two remote sites is desired in many applications such as global positioning satellite systems, long-baseline interferometry, coherent radar detection and fundamental physics constant measurements. The recently developed frequency dissemination technologies based on optical fiber link have improved the transfer instability to the level of 10−19/day at remote location. Therefore it is possible to keep clock oscillation at remote locations continuously corrected, or to reproduce a “virtual” clock on the remote location. However the initial alignment and the correction of 1 pps timing signal from time to time are still required, besides the highly stabilized clock frequency transfer between distant locations. Here we demonstrate a time synchronization based on an ultra-stable frequency transfer system via 120-km commercial fiber link by transferring an optical frequency comb. Both the phase noise compensation in frequency dissemination and temporal basis alignment in time synchronization were implemented by a feed-forward digital compensation (FFDC) technique. The fractional frequency instability was measured to be 6.18 × 10−20 at 2000 s. The timing deviation of time synchronization was measured to be 0.6 ps in 1500 s. This technique also can be applied in multi-node fiber network topology.

Sensitive linear optical sampling system with femtosecond precision

1506 Determination of the origin position for an angle sensor with a femtosecond laser

Time-interval Measurement with Linear Optical Sampling at the Femtosecond Level

Hundred-Femtosecond-Level Concise Optical Time Delay Measurement System Based on Linear Optical Sampling

Phase-Modulation-Based Coarse Time Synchronization for Linear Optical Sampling System

Orthogonal Polarization Femtosecond Laser For Optical Sampling

Reference-free, high-resolution measurement method of timing jitter spectra of optical frequency combs

Linear optical sampling technique for simultaneously characterizing WDM signals with a single receiving channel

Sub-ps Resolution Clock-Offset Measurement over a 114 Km Fiber Link Using Linear Optical Sampling.

Real-Time Synchronization of Clocks at Femtosecond Level Through a 113 Km-Free-space Link

Sub-attosecond-precision optical-waveform stability measurements using electro-optic sampling

Generalized Linear Optical Sampling Technique Realized by Using Non-Pulse Electro-Optic Frequency Comb Sampling Source

Design and Analysis of Wideband Digital Frequency Measurement Based on Optical Sub-Sampling

Femtosecond Optical Frequency Combs for Precision Measurement Applications

Detection And A/D Conversion For 10ghz Periodic Signals With Optical Sampling

Optoelectronic hybrid oscillating fiber-optic sensor with attosecond precision and reconfigurable sensitivity

Characterization of Electro-Optical Devices with Low Jitter Single Photon Detectors -- Towards an Optical Sampling Oscilloscope Beyond 100 GHz

Strategies of precision enhancement for dual-comb time-of-flight distance measurement with nonlinear detection by numerical simulation

Absolute Distance Measurement by Dual-Comb Nonlinear Asynchronous Optical Sampling.

A narrow linewidth terahertz dual-comb spectrometer with an all-fiber adaptive clock and a real-time feedback loop

Simultaneously Precise Frequency Transfer and Time Synchronization Using Feed-Forward Compensation Technique Via 120 Km Fiber Link