Abstract:The inherent compliance of soft materials imbues robots, generally referred to as soft robots, with particular advantages in producing adaptive and safe interactions. However, the mainstream design paradigms of soft robots have been focused on pursuing large free motions only, usually at the expense of greatly decreased stiffness, leading to limited capability of withstanding external loads in interactive scenarios. There is a pressing need to incorporate the interaction specifications at the design stage to embody soft robots with not only proper deformability but equally importantly, considerable stiffness to perform complex tasks in practical applications. Here, inspired by the dexterity of human hands, we propose a computational design framework for soft grippers with a focus on improving their interaction performance in power grasping or precision grasping mode. The design paradigm rests on attaching a relatively stiffer skeleton layer to the parametric pneumatic networks based actuator which is widely used due to the geometric advantage, and the skeleton layout is designed for customized interaction conditions by a level set based topology optimization approach. As expected, the optimized skeleton layouts exhibit specified structural features highly relevant to the predefined concentrated loads for precision grip or distributed loads for power grip, which physically implies the compromise between deformability and stiffness. Since the interaction forces are difficult to measure in situ, we devise power and precision grasping scenarios and evaluate the critical actuation pressure of the object’s falling instead. The experiments qualitatively demonstrate the superiority of each specified design. This work represents an initial step toward the rational design for interaction in soft robots.

Research on Stiffness Improvement of a Soft Pneumatic Finger Using Skeleton

Torsional Stiffness Improvement of a Soft Pneumatic Finger Using Embedded Skeleton

Design and Simulation Experiment of Rigid-Flexible Soft Humanoid Finger

In Situ Stiffness Manipulation Using Elegant Curved Origami

A Bioinspired Gripper with Sequential Motion and Mutable Posture Enabled by Antagonistic Mechanism

Tailoring the in-plane and out-of-plane stiffness of soft fingers by endoskeleton topology optimization for stable grasping

Endoskeleton Soft Multi-Fingered Hand with Variable Stiffness

A Biomimetic Soft-Rigid Hybrid Finger with Autonomous Lateral Stiffness Enhancement

Enhancing Interaction Performance of Soft Pneumatic-Networks Grippers by Skeleton Topology Optimization

Design and Fabrication of a Variable Stiffness Soft Pneumatic Humanoid Finger Actuator

Design and Stiffness Analysis of a Bio-inspired Soft Actuator with Bi-direction Tunable Stiffness Property

A Bioinspired Bidirectional Stiffening Soft Actuator for Multimodal, Compliant, and Robust Grasping

A Rigid-Soft Pneumatic Wrist with Fixed Rotation Axes and Active Jamming Variable Stiffness Mechanisms.

Optimizing out-of-plane stiffness for soft grippers

Bioinspired Bidirectional Stiffening Soft Actuators Enable Versatile and Robust Grasping

Three-Fingered Soft Pneumatic Gripper Integrating Joint-Tuning Capability

Analytical modeling and optimization of a corrugated soft pneumatic finger considering the performance of pinch and power grasps

A Human-Inspired Soft Finger with Dual-Mode Morphing Enabled by Variable Stiffness Mechanism.

A Mortise-Tenon Inspired Variable Stiffness Finger for Multi-Mode Grasping

Mechanical design, modeling, and identification for a novel antagonistic variable stiffness dexterous finger

A finger-inspired pneumatic network actuator based on rigid-flexible coupling structure for soft robotic grippers