Abstract:Gel electrolytes are chemically stable, nonflammable and easy to encapsulate, however, their moderate ionic conductivity (10(-4)-10(-5)S.cm(-1)) hinders their further development for the usage in electrochromic devices (ECDs). Here, we developed a highly conductive hydrophobic SiO2/PNIMA/PC/LiClO4 gel polymer electrolyte (H-SiO(2 )GPE). Electrochemical behaviors of ECDs were characterized by electrochemical impedance spectroscope (EIS), cyclic voltammetry (CV) and chronoamperometry (CA). Systematic analyses show that the ionic conductivity of the H-SiO2 GPE can reach 5.14 mS.cm(-1) (at 25 degrees C) by introducing only 0.5wt% hydrophobic fumed SiO2. This increase is due to the good compatibility and hydrophobic-hydrophobic attractions between SiO2 additive and organic electrolyte, which promotes the dissociation of lithium perchlorate. Additionally, the viscosity as a function of shear rate for GPE with various fumed silica contents shows the behavior of shear thinning, which indicates the formation of a three-dimensional network structure. This structure provides ion transport channels, leading to a clearly improved switching speed for ECDs assembled with hydrophobic SiO2 GPEs (t(bleaching)=4 vs 8 s and t(coloring=)14 vs 16 s). Similarly, the investigation of hydrophobic fumed SiO2 in liquid electrolyte is demonstrated that the ionic conductivity of LiClO4/PC liquid electrolyte without and with hydrophobic fumed SiO2 increases from 6.94 to 7.58 mS.cm(-1), respectively. Therefore, hydrophobic fumed SiO2 as a filler has a positive effect on electrolytes, and the proposal of the H-SiO2 GPE provides a new idea for offsetting the trade-off between a high ionic conductivity and easy leakage when applied in ECDs.

All Solid State Electrochromic Devices Based on the LiF Electrolyte.

All-solid-state electrochromic devices based on the LiAlSiO4 electrolyte

Preparation and performance of fast-response ITO/Li-NiO/Li-WO3/ITO all-solid-state electrochromic devices by evaporation method

Effect of independently controllable electrolyte ion content on the performance of all-solid-state electrochromic devices

Lithiation of WO3 films by evaporation method for all-solid-state electrochromic devices

MgF2 as abundant and environmentally friendly electrolytes for high performance electrochromic devices

A large-area, flexible, high contrast and long-life stable solid-state electrochromic device driven by an anion-assisted method

Extraordinarily fast response all-solid-state electrochromic devices

High-performance of Quasi-Solid-state Complementary Electrochromic Devices Based on Al3+/Li+ Dual-Ion Electrolyte

Preparation and Properties of All-Solid-State Inorganic Thin Film Glass/Ito/Wo3/Linbo3/Niox/Ito Electrochromic Device

CaF2: A novel electrolyte for all solid-state electrochromic devices

Realisation of Solid-State Electrochromic Devices Based on Gel Electrolyte

Improved electrochromic devices with an inorganic solid electrolyte protective layer

High-conductivity Hydrophobic Fumed-SiO2 Composite Gel Electrolyte for High Performance Electrochromic Devices

Electrochemical investigation of electrochromic device based on WO 3 and Ti doped V 2 O 5 films by using electrolyte containing ferrocene

Transparent Succinonitrile-Modified Polyacrylate Gel Polymer Electrolyte for Solid Electrochromic Devices

All-thin-film inorganic complementary electrochromic devices with the novel self-aligned lithium-rich ion conductor

Synergistic Effect of Al3+/Li+-Based All-Solid-State Electrochromic Devices with Robust Performance

Electrochromic Device Composed of a Di-Urethanesil Electrolyte Incorporating Lithium Triflate and 1-Butyl-3-Methylimidazolium Chloride

Electro-optical performance of solid-state electrochromic device based on self-supporting electrolyte

An all-solid-state polymeric electrochromic device based on two well-matched electrodes with fast switching time and excellent cycling stability