Abstract:The surface roughness (Ra) of indirect computer-aided design/computer-aided manufacturing (CAD/CAM)-fabricated dental restorations is crucial for their long-term durability. This study intended to evaluate the Ra of five different types of contemporary indirect CAD/CAM restorative materials with varying compositions that were glazed and finished/polished. A total of 75 specimens, disc-shaped (10 mm × 2 mm), were obtained from five materials (n = 15) (Tetric CAD, IPS e.max CAD, IPS e.max ZirCAD, CELTRA Duo, and Vita Enamic) and fabricated by CAD/CAM. One of the two surfaces for each specimen was subjected to glazing, while the other surface was subjected to finishing/polishing. The Ra of the two surfaces in micrometers (μm) was evaluated using a Profilometer, while the surface topography was examined using a scanning electron microscope. Using SPSS, the Kruskal–Wallis, post hoc Conover, and Mann–Whitney tests were used to statistically evaluate the data. A comparison of the Ra for the finished/polished surfaces of the five test materials showed significant differences (p < 0.0001). Among the finished/polished surfaces, the mean rank values of Vita Enamic were significantly higher than the other four test materials (p < 0.0001). A comparison of the Ra of glazed surfaces among the five study materials revealed significant differences (p < 0.0001). The Ra for the IPS e.max ZirCAD material was significantly higher than the rest of the four materials (p < 0.001). A comparison of the Ra for two types of surface conditioning within each of the five test materials showed a significant difference (p < 0.05). Only for IPS e.max ZirCAD was the Ra of the glazed surface significantly higher than the finished/polished surface (p < 0.0001). Significant variations in the surface roughness (Ra) were exhibited between the finished/polished and glazed surfaces of the five test materials. Hybrid ceramics showed the highest Ra values for the finished/polished surfaces, and zirconia exhibited the highest Ra values among the glazed surfaces among the tested materials. The Ra values of either finished/polished or glazed surfaces of the test materials were within the clinically acceptable range (0.2–0.5 μm), except for the glazed surface of the zirconia ceramics (0.84 μm).

The Application Potential of Self-Glazed Zirconia Crowns Confirmed by Easy Grinding and Polishing of the Enamel-Like Surface

Three-dimensional Fit of Self-Glazed Zirconia Monolithic Crowns Fabricated by Wet Deposition

Effect of Machining Method and Margin Design on the Accuracy and Margin Quality of Monolithic Zirconia Crowns

Accuracy and Margin Quality of Advanced 3D-Printed Monolithic Zirconia Crowns.

Influence of different surface finishing procedures of strength-gradient multilayered zirconia crowns on two-body wear and fracture load: Lithium silicate or leucite glazing versus polishing?

Comparison of polishing methods for two types of monolithic all-ceramic crowns after occlusal adjustments: Polishing paste versus glazed porcelain

Promoted Abutment-Soft Tissue Integration Around Self-Glazed Zirconia Surfaces with Nanotopography Fabricated by Additive 3D Gel Deposition

Can low-fusing glass application affect the marginal misfit and bond strength of Y-TZP crowns?

[Preliminary Evaluation of Clinical Effect of Computer Aided Design and Computer Aided Manufacture Zirconia Crown].

A Comprehensive Review of the Surface and Chromatic Properties of Monolithic Zirconia: Evaluating the Impact of Polishing and Finishing Methods on Aesthetics and Performance

Effect of Staining, Glazing and Polishing on the Survival Probability of Monolithic Zirconia Crowns

Self-glazed Zirconia Reducing the Wear to Tooth Enamel

Effect of toothbrushing with conventional and whitening dentifrices on monolithic zirconia after finishing procedures

Esthetic Appearances of Anatomic Contour Zirconia Crowns Made by Additive Wet Deposition and Subtractive Dry Milling: A Self-Controlled Clinical Trial

Knife-edged Crown Fabricated by 3-Dimensional Gel Deposition and Soft Milling.

Effects of Surface Treatments and Abutment Shades on the Final Color of High-Translucency Self-Glazed Zirconia Crowns.

Fatigue Behaviours of the Zirconia Dental Restorations Prepared by Two Manufacturing Methods

Effect of toothbrushing on surface roughness, gloss, and topography of polished and glazed ultra‐translucent zirconia

The Shear Bond Strength of Resin-Based Luting Cement to Zirconia Ceramics after Different Surface Treatments

Clinical application principles and new developments of zirconia crown

The Surface Roughness of Contemporary Indirect CAD/CAM Restorative Materials That Are Glazed and Chair-Side-Finished/Polished