Abstract:Chain damage is a new phenomenon that occurs when a reactive jet impacts and penetrates multi spaced plates. The reactive jet produces mechanical perforations on the spaced plates by its kinetic energy (KE), and then results in unusual chain rupturing effects and excessive structural damage on the spaced plates by its deflagration reaction. In the present study, the chain damage behavior is initially demonstrated by experiments. The reactive liners, composed of 26 wt%Al and 74 wt% PTFE, are fabricated through a pressing and sintering process. Three reactive liner thicknesses of 0.08 CD, 0.10 CD and 0.12 CD (charge diameter) are chosen to carry out the chain damage experiments. The results show a chain rupturing phenomenon caused by reactive jet. The constant reaction delay time and the different penetration velocities of reactive jets from liners with different thicknesses result in the variation of the deflagration position, which consequently determines the number of ruptured plates behind the armor. Then, the finite-element code AUTODYN-3D has been used to simulate the kinetic energy only-induced rupturing effects on plates, based on the mechanism of behind armor debris (BAD). The significant discrepancies between simulations and experiments indicate that one enhanced damage mechanism, the behind armor blast (BAB), has acted on the ruptured plates. Finally, a theoretical model is used to consider the BAB-induced enhancement, and the analysis shows that the rupturing area on aluminum plates depends strongly upon the KE only-induced pre-perforations, the mass of reactive materials, and the thickness of plates.(c) 2020 China Ordnance Society. Production and hosting by Elsevier B.V. on behalf of KeAi Communications Co. This is an open access article under the CC BY-NC-ND license (http:// creativecommons.org/licenses/by-nc-nd/4.0/).

Chain Damage Effects Of Multi-Spaced Plates By Reactive Jet Impact

Numerical Study on the Perforation of Steel Plates by Multiple Projectiles

Penetration of Disk Fragments Following Impact on Thin Plate

Strain-rate-dependent Cohesive Zone Modelling of Charge Damage Behavior when a Projectile Penetrates Multilayered Targets

Numerical simulation of the disk fragment impacting resistance of plate target

Spallation Mechanism of RC Slabs under Contact Detonation

Formation behaviors of rod-like reactive shaped charge penetrator and their effects on damage capability

Dynamic Response of Fully-Clamped Steel Plate under Laboratory-Simulated Sequential Fragment Impact and Blast Loading

Experimental Study on Damage Effect of PELE with New Structure and Composite Material against Multi-Layered Plates

The Effect of Surface Electroplating on Fragment Deformation Behavior When Subjected to Contact Blasts

Damage of Multi-Layer Spaced Metallic Target Plates Impacted by Radial Layered PELE

Damage Mechanism Of Reinforced Concrete Slab Under Internal Blast Loading

The Penetration–Explosion Effects of Differently Distributed Inactive/Active Composite Shaped Charge Jets

Density Effect of PTFE-Copper Powder Metallurgy Liner Material on the Perforation Performance of Shaped Charge Jets

Numerical investigation on dynamic damage behavior of a novel N-shaped perforated armor plate under ballistic impact

Failure mode and energy absorption mechanism of steel/aluminum composite plates impacted by spherical fragment

Dynamic Response of a Warship's Metal-Jet-Damaged Double-Layer Plates Subjected to the Subsequent Underwater Explosion

Dynamic Response Characteristics of Composite Concrete Structures Subjected to Reactive Jet Impact

On the Impact Failure Behavior of Triaxially Braided Composites Subjected to Metallic Plate Projectile

Ballistic Penetration of Deforming Metallic Plates: Experimental and Numerical Investigation

Macroscopic Dynamic Response and Microscopic Damage Formation Analysis of Steel Plates with Different Explosive Distances