Abstract:Due to the growing electric vehicle market and new trends to reduce fuel consumption for a healthy environment, safe and reliable vehicles are desirable for reasons beyond EV and new technology. Although certain safety standards and legislation are in place and continuously improving but several concerns including battery safety, battery performance, vehicle structure, and battery design to be considered as these affect the overall reliability of Electric vehicles (EVs). Lithium-ion battery technology is considered a good solution to power electric vehicles but potential overheating due to stressful conditions such as mechanical abuse, overcharge, over-discharge, short circuit, and excessive heat from external environment gives rise to safety issues and the occurrence of one or more than one of these can lead to thermal runaway. In most cases, an electric short circuit is a necessary but not sufficient condition for the occurrence of thermal runaway after mechanical abuse. Chemistry of the cell, the resistance of separator to heat, size of the fractured part, and rate of heat transfer all play a role in processes leading to a thermal runaway, if the cell has not gone to thermal runaway right away it can still go into a slow process of electrochemical reaction, releasing gases that eventually could lead to a catastrophic event. This abstract investigates the mechanical behaviour of the separator in the LiCoO2/Graphite cylindrical 18650 cells. Internal short circuit (ISC) behaviour, strain rate dependency, and electrochemical status of the cells (i.e. SOC dependency) are studied to understand failure patterns. Furthermore, a simple and effective constitutive model for the separator layer is formed, facilitating further mechanical analysis and numerical simulation of lithium-ion battery study. The occurrence of ISC is investigated by jellyroll deformation where the casing is removed, and quasi-static load is applied. The numerical simulation model is developed to further investigate sequential structural failures and temperature changes. Simulation results showed good accuracy with experimental results and are useful to predict structural failure of cells. The number of failures including electrolyte leakage, change in shape, sudden voltage drop/temperature rise, and gas venting are observed.

Investigation of Mechanical Property of Cylindrical Lithium-Ion Batteries under Dynamic Loadings

Mechanism of failure behaviour and analysis of 18650 lithium-ion battery under dynamic loadings

Analysis of Internal Short Circuit and Thermal Runaway of Li-Ion Battery Due to Mechanical Abuse

Deformation and Failure Properties of Lithium-Ion Battery Under Axial Nail Penetration

Modeling and Characterization of Li-Ion 18650 Nickel–Cobalt–Alumina Battery Jellyroll Subjected to Static and Dynamic Compression Loading

Stress and Strain Characterization for Evaluating Mechanical Safety of Lithium-Ion Pouch Batteries under Static and Dynamic Loadings

Decoupling the Influence of Impact Energy and Velocity on Dynamic Failure of Cylindrical Lithium-Ion Batteries

Unlocking the coupling mechanical-electrochemical behavior of lithium-ion battery upon dynamic mechanical loading

A novel anisotropic model for multi-stage failure threshold of Lithium-ion battery subjected to impact loading

Coupling Effect of State-of-Charge and Strain Rate on the Mechanical Behavior of Electrodes of 21700 Lithium-Ion Battery

Dynamic crushing behaviors and failure of cylindrical lithium-ion batteries subjected to impact loading

Improved Constitutive Model of the Jellyroll for Cylindrical Lithium Ion Batteries Considering Microscopic Damage

Multiphysics computational framework for cylindrical lithium-ion batteries under mechanical abusive loading

Multiphysics computational framework for cylindrical lithium ion batteries under mechanical abusive loading

A safety performance estimation model of lithium-ion batteries for electric vehicles under dynamic compression

Mechanical Behavior Analysis of High Power Commercial Lithium-Ion Batteries

Fracture Mode Analysis of Lithium-Ion Battery under Mechanical Loading

Experiments and 3D detailed modeling for a pouch battery cell under impact loading

Deformation and Failure Properties of High-Ni Lithium-Ion Battery under Axial Loads

Characterization of plasticity and fracture of shell casing of lithium-ion cylindrical battery

Dynamic Crushing Behaviors of Cylindrical Lithium-Ion Battery Under Multiple Impacts: An Experimental Study