Abstract:Performance degradation of lithium-ion batteries (LIBs) from in-service abuse was analyzed using novel dynamic abuse tests and sensor-based in-situ monitoring of battery state of health (SOH). The relation between dynamic impact and structure changes of LiCoO2 (LCO) electrode was analyzed through a nano-impact test directly applied to the electrode and Raman imaging. After the electrode structure damage induced by the dynamic loading was analyzed, the performance of the LIBs with the abused electrodes was evaluated to establish the relation between the number of impact cycles and LIB performance degradation. The mechanism of impact related LIB capacity decrease was analyzed, and the capacity change can be predicted based on the impact abuse history using this approach. In order to provide more detailed information on the battery performance degradation caused by the in-service dynamic loads, a dynamic aging testing platform was designed to simulate in-service vibration and impact experienced by the LIBs. Based on the lessons learned, a sensor network was constructed to provide a comprehensive in-situ evaluation of the SOH of commercial batteries. Mechanisms of LIB capacity fade, temperature increase, and cell deformation from cycling in representative dynamic environments were analyzed and correlated with theoretical predictions. Difference between the aging of a battery pack and that of a single cell was also investigated, which presented the influence of current imbalance on the SOH decay of battery packs. SEM imaging, Raman imaging, and electrochemical impedance spectroscopy (EIS) analysis were also applied to support the sensor network measurements. In order to provide an early detection of catastrophic LIB failure such as thermal runaway, an internal resistance temperature detector (RTD) based electrode temperature monitoring approach was developed. By embedding the RTD into LIBs with 3D printing technique, electrode temperature can be collected during ordinary cycling and electrical abuse of LIBs, such as external short circuit and overcharge. The internal RTD presented high measuring efficiency, while there was no interference between the sensor measurement and battery operation. The internal RTD detected the short circuit event and overcharge failure prior of time: the efficiency of the internal RTD was 6-10 times higher than the external RTD in the short circuit test. This provided the chance for early detection and prevention of catastrophic LIB failures. Besides, with the detailed information on electrode temperature evolution during LIB thermal runaway available, the internal RTD also provided the chance to enhance the understanding of the thermal runaway mechanism.

Multiphysics computational framework for cylindrical lithium-ion batteries under mechanical abusive loading

Multi-Physics Computational Model for Lithium-Ion Batteries Under Mechanical Abusive Loading

A Multiphysics Computational Framework for Cylindrical Battery Behavior Upon Mechanical Loading Based on LS-DYNA

Multiphysics computational framework for cylindrical lithium ion batteries under mechanical abusive loading

Safety Optimal Design of Lithium-Ion Battery Cell Based on Multiphysics Models

A Multiphysics Understanding of Internal Short Circuit Mechanisms in Lithium-Ion Batteries Upon Mechanical Stress Abuse

A Detailed Computational Model for Cylindrical Lithium-Ion Batteries under Mechanical Loading: from Cell Deformation to Short-Circuit Onset

High-efficiency Multiphysics Coupling Framework for Cylindrical Lithium-Ion Battery under Mechanical Abuse

Multi-field Interpretation of Internal Short Circuit and Thermal Runaway Behavior for Lithium-Ion Batteries under Mechanical Abuse

Investigation of the mechanical response and modeling of prismatic lithium-ion batteries upon abusive loading

Effective thermo-electro-mechanical modeling framework of lithium-ion batteries based on a representative volume element approach

A novel anisotropic model for multi-stage failure threshold of Lithium-ion battery subjected to impact loading

Modeling strategy for progressive failure prediction in lithium-ion batteries under mechanical abuse

Multi-physics safety model based on structure damage for lithium-ion battery under mechanical abuse

Multi-Layered Numerical Model Development of a Standard Cylindrical Lithium-Ion Battery for the Impact Test

EXAMINATION OF LITHIUM-ION BATTERY PERFORMANCE DEGRADATION UNDER DYNAMIC ENVIRONMENT AND EARLY DETECTION OF THERMAL RUNAWAY WITH INTERNAL SENSOR MEASUREMENT

Computational Model of 18650 Lithium-Ion Battery with Coupled Strain Rate and SOC Dependencies

Internal short circuit and dynamic response of large-format prismatic lithium-ion battery under mechanical abuse

The Anisotropic Homogenized Model for Pouch Type Lithium-Ion Battery under Various Abuse Loadings

Revealing the internal short circuit mechanisms in lithium-ion batteries upon dynamic loading based on multiphysics simulation

Experimental investigation on mechanical-electrochemical coupling properties of cylindrical lithium-ion batteries