Abstract:As a new welding method, ultrasound has been successfully introduced into the pool during ultrasonic wave-assisted arc welding process. However, the interaction mechanism between the ultrasound and the arc plasma is not clear, thus preflenting the new technique from engineering applications. In this paper, the characteristic of arc regulation by external ultrasonic field is investigated based on the experimental data and the corresponding theory. In order to figure out the characteristics of arc, the arc images obtained by high-speed camera are processed. Compared with the conventional welding arc, ultrasonic wave-assisted arc is more contracted and becomes brighter, the high-temperature region in an arc column greatly expands, and there are internal particle agglomerations shaking up and down at a constant frequency. The arc shape varies with ultrasound excitation current and the height of ultrasonic radiator. In the vicinity of the resonance point, the straight-degree of the arc is the strongest and the ripple frequency is also the largest. Results show that the purpose of using external ultrasound field to regulate the thermal plasma has basically achieved. Analyzing the acoustic pressure wave equation for the neutral component shows that the spatial distribution of acoustic wave can be generated in the arc and its intensity is proportional to the local amplitude of acoustic waves. Acoustic pressure field can be calculated based on the dependence of the electron temperature and density on time and space. In addition to the action of acoustic field within the arc, the arc plasma is also controlled by the acoustic field structure. A two-cylinder model incorporating boundary element method is developed, establishing a relationship between the binding capability and the geometric parameters of an ultrasonic radiator with reflerence to wavelength. This model is successful in predicting resonant modes of the acoustic field and explaining the influences of the ultrasonic radiator height on welding arc. Variation of arc shape is the result of the combined effect of axial and radial acoustic radiation forces on particles (electron, ion and neutral). The thermal efficiency will be significantly enhanced since the particle density increases in the ultrasonic wave-assisted arc. The acoustic propagation in the arc is the interacting process between acoustic and thermal plasmas. The mechanism of ultrasound acting on the arc can be reasonably explained in this study. And the results may provide a reflerence for plasma engineering applications. However, it also needs further reflearch on the impact of an arc on the acoustic field.

Investigation of sound generated by a DC biased rectangular AC current arc in ambient air

Numerical Simulation of Acoustic Wave Generated by the AC Arc

Numerical investigations of AC arcs' thermal characteristics in the short gap of copper-cored wires

DC Arc Numerical Calculations and Experimental Researches Based on the Arcing Horn Used in Over-head Line

Researches on Spectrums and Macroscopic Forms of DC Arc in a Short Air Gap

Experimental Study on the DC Arc Characteristics Surrounded by Underwater and Air

Investigation on Arc Behavior During Arc Motion in Air DC Circuit Breaker

Differences in the acoustic characteristics of DC bias alternating arcs in argon, helium, and nitrogen

Characteristics of Acoustic-Controlled Arc in Ultrasonic Wave-Assisted Arc

Performance and Characteristics of a Small-Current DC Arc in a Short Air Gap

Analysis of Arc Sound Characteristics for Gas Tungsten Argon Welding

Experimental Research on Voltage-Current Characteristics of Carbon AC Arc

Dynamic physical characteristics of DC arc on arcing horn for HVDC grounding electrode line

Study on the Pressure Field Reconstruction Method and Its Relationship With Audible Noise of DC Corona Discharge

An Experimental Study of AC Arc Propagation over a Contaminated Surface

Investigation on the Shockwave Induced by Surface Arc Plasma in Quiescent Air

Study on Arc Generated by Opening Electromagnetic Relay Contacts in DC Low-Current Resistive Circuit with Constant Velocity.

Research on Motion Characteristics of Arc at Low Air Pressure

Experimental Research on the Thermal Characteristic of Low-Voltage Alternating Current (AC) Arc Faults

Motion Characteristics of Long Ac Arcs in Atmospheric Air

Investigation on the Arc Phenomenon of Air DC Circuit Breaker