Abstract:Alumina ceramics, due to their excellent properties of high hardness, corrosion resistance, and low thermal expansion coefficient, are important industrial materials with a wide range of applications, but these materials also present difficulty in machining with low material removal rates and high tool wear. This study is concerned with laser-assisted machining (LAM) of high weight percentage of alumina ceramics to improve the machinability by a single point cutting tool while reducing the cutting forces. A multiscale model is developed for simulating the machining of alumina ceramics. In the polycrystalline form, the properties of alumina ceramics are strongly related to the glass interface existing in their microstructure, particularly at high temperatures. The interface is characterized by a cohesive zone model (CZM) with the traction–separation law while the alumina grains are modeled as continuum elements with isotropic properties separated by the interface. Bulk deformation and brittle failure are considered for the alumina grains. Molecular dynamics (MD) simulations are carried out to obtain the atomistic structures and parameterize traction–separation laws for the interfaces of different compositions of alumina ceramics at high temperatures. The generated parameterized traction–separation laws are then incorporated into a finite element model in Abaqus to simulate the intergranular cracks. For validation purposes, simulated results of the multiscale approach are compared with the experimental measurements of the cutting forces. The model is successful in predicting cutting forces with respect to the different weight percentage and composition of alumina ceramics at high temperatures in LAM processes.

A Finite Element Model for Temperature Prediction in Laser-Assisted Milling of AerMet100 Steel

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Analytical modeling of workpiece temperature in laser-assisted milling considering the combined effect of multi-heat sources

Simulation of High-Speed Milling Process of Aerospace Aluminum Alloy

Finite Element Simulation and Analysis of Aluminum Alloy Three-Dimensional Milling

Simulation of 3d Chip Shaping of Aluminum Alloy 7075 in Milling Processes

Analytical modeling of the heat-affected zone in laser-assisted milling of AerMet100 steel

Three-dimensional numerical simulation for high speed milling of aerospace aluminum alloy

Research on 3D Numerical Simulation and Experiment of Cutting Temperature for High Speed Milling of Aerospace Aluminum Alloy

Analytical modeling of cutting forces considering material softening effect in laser-assisted milling of AerMet100 steel

Finite Element Simulation and Analysis of Deformation in Machining of Aeronautical Aluminum Alloy Thin-Walled Workpiece

Numerical Simulation Study on Milling Force for Aerospace Aluminum Alloy

3d Finite Element Modeling Of Laser Machining Pmma

Improving the accuracy and reliability of temperature field simulation during laser metal deposition

System Design For Laser Assisted Milling Of Complex Parts

A Predictive Model for Temperature Rise of Spindle–Bearing Integrated System

Simulation and Experimental Analysis of Tool Wear and Surface Roughness in Laser Assisted Machining of Titanium Alloy

Prediction Model for Liquid-Assisted Femtosecond Laser Micro Milling of Quartz without Taper

Multiscale Finite Element Modeling of Alumina Ceramics Undergoing Laser-Assisted Machining

Thermal field prediction for laser scanning paths in laser aided additive manufacturing by physics-based machine learning

An Experimental Study in Laser-Assisted Machining of AerMet100 Steel