Abstract:A new type of hydroxyl-terminal block copolymer (HTPE) binder with excellent mechanical properties was prepared using an in situ preparation method. Compared with traditional HTPE binder preparation, this method involves relatively simple operations, which not only reduces costs, but also does not require a complicated synthesis process to prepare the HTPE prepolymer intermediate. Thus, it is expected to replace the binder for HTPE propellants. The mechanical properties, crosslinking density, hydrogen bonding, and thermal performances of the prepared HTPE binders were investigated through tensile testing, low-field nuclear magnetic resonance (LF-NMR), Fourier-transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC) analysis. The ultimate tensile strength (σm) of the in situ-prepared HTPE binder was 1.83 MPa, the fracture elongation (eb) was 371.61%, and the strength increased by 80% compared to the HTPE binders. The crosslink density (Ve) decreased with an increasing content of PEG and/or TDI. The proportion of H-bonds formed by the imino groups increased with the content of PEG and TDI and reached 81.49% at PEG and TDI contents of 50% and 80%, respectively, indicating a positive correlation between the H-bonds and σm. Based on the statistical theory of elasticity, the integrity of the curing networks showed that the contents of PEG and TDI affected the integrity of the curing networks. The DSC data of the in situ-prepared HTPE binder showed a lower glass transition temperature. Finally, compared to HTPE propellant, the strength and elongation of the in situ-prepared HTPE propellant increased by 206% and 135%, respectively. This exciting result greatly enhances the feasibility of the in situ HTPE preparation method.

Molecular Investigations on the Adsorption and Flow Behavior of Hydroxyl-Terminated Polybutadiene (HTPB) Binders on Cu Surfaces: the Effects of Surface Nanostructure and Perfluorosilylation

Molecular investigation of adsorption behaviors of hydroxyl-terminated polybutadiene (HTPB) binders onto copper surface: The effects of aluminum nanoparticles

Experimental and Theoretical Investigations on the Adherent Behaviors of High Viscosity Liquid: the Effect of Surface Topography

Synthesis and Characterization of a Novel Hydroxy Telechelic Polyfluoroether to Enhance the Properties of HTPB Solid Propellant Binders

Chemical Modification Of Hydroxyl-Terminated Polybutadiene And Its Application In Composite Propellants

Research on microscopic structure–activity relationship of AP particle–matrix interface in HTPB propellant

Mechanical properties and deformation behaviors of the hydroxyl-terminated polybutadiene and ammonium perchlorate interface by molecular dynamics simulation

Surface Wetting Behaviors of Hydroxyl-Terminated Polybutadiene: Molecular Mechanism and Modulation

The Effect of a Novel of Hyperbranched Cross-Linking Agent on the Mechanical of Hydroxyl-Terminated Polybutadiene Based Solid Propellant

Design and Application of Binder System for Castable Polymer Bonded Explosive

Study on the Relationship Between Microscopic Structure and Mechanical Properties of HTPB Propellant

Enhancing the Performance of an HTPE Binder by Adding a Novel Hyperbranched Multi-Arm Azide Copolyether

Influence of Fluorinated Polyurethane Binder on the Agglomeration Behaviors of Aluminized Propellants

Mechanical properties and influence mechanism of hydroxyl‐terminated polybutadiene propellant under confining pressure

Improvement of mechanical properties of in situ-prepared HTPE binder in propellants

Influence of Hydroxyl-Terminated Polybutadiene Liquid on Rheology of Fumed Silica Filled Cis-Polybutadiene Rubber

Enhancing energy release of aluminized propellants and explosives through fluorinated binder

Performances of Aluminized Casting PBX Explosive Based on Hydroxyl-terminated Fluorine-containing Binder

Molecular Dynamic Simulations and Experiments Study on the Mechanical Properties of HTPE/PEG Interpenetrating Polymer Network (IPN) Binders

Curing and Cross-Linking Processes in the Poly(3,3-bis-azidomethyl oxetane)-tetrahydrofuran/Toluene Diisocyanate/Trimethylolpropane System: A Density Functional Theory and Accelerated ReaxFF Molecular Dynamics Investigation

Effect of Particle Size and Surface Free Energy of RDX on the Mechanical Properties of HTPB Propellant