Abstract:The statistics of droplets formed by the primary jet breakup of a liquid atomization system are critical since it determines the atomization quality and resultant spray characteristics. However, quantifying the droplet statistics by applying optical diagnostic instruments is challenging because of the dense population of droplets near the nozzle exit. In a flash boiling spray, the more rapid breakup produces a higher optical dense droplet cloud, which is more challenging. Besides, the interference from the vapor phase heavily evaporated is more problematic. In this study, we incorporated an in-house developed laser-induced exciplex fluorescence (LIEF/Mie) based droplet sizing technique to quantify the near-field droplet characteristics of a single jet flash boiling spray, which can separate the liquid spray from the vapor phase to eliminate the influence of the vaporization. To mitigate the interference of multiple scattering in the dense region, a 3-phase structured laser illumination planar imaging (3p-SLIPI) facility was implemented into the measuring system to modulate the laser beam. The combination of these two unique techniques succeeded in obtaining accurate quantification of a planar droplet size distribution of this flash boiling spray. The 3p-SLIPI-LIEF/Mie measurements were validated against phase Doppler interferometry (PDI) droplet size measurement results. It is found from this study that the SLIPI-LIEF/ Mie results are more accurate and more appropriate for simulation or theoretical analysis compared to LIEF/Mie results. The investigation of the flash boiling sprays under various superheat conditions was conducted using this technique. The quantitative near-field droplet size information reveals the prompt atomization mechanism of the flash boiling sprays. Comparing to the non-flash boiling sprays, the SMD is much smaller, the distribution is more uniform, and the tendency becomes more significant as the superheat degree increases. The SLIPI-LIEF/Mie results show that there is no liquid core region or sudden droplet size reduction due to flash boiling secondary micro-explosion breakups. Rather, a central dense region formed due to rapid expansion and evaporation at the exterior zones of the flash boiling spray was found.

Diagnosis of Liquid-Gas Mixed Sprays in the Near-Field Region Using Femtosecond Laser Induced Supercontinuum Imaging Method.

Supercontinuum-illumination for Long-Working-distance Microscopic Imaging of Air–liquid Mixed Sprays in the Near-Nozzle Region

Imaging of High-Pressure Fuel Sprays in the Near-Nozzle Region with Supercontinuum Illumination

Acoustic emission detection and CFD simulation of a liquid spray process

Comparison of Femtosecond Shadowgraphy and Optical Kerr Gated Ballistic Imaging for Measurements of Spray Structures.

Detection of Liquid Atomization Status Using Acoustic Emission Method

Dynamic and Steady-State Characterization of the Liquid Spray Zone in an Externally Heated Gas–Solid Fluidized Bed

Spray Trajectory and 3D Droplets Distribution of Liquid Jet in Crossflow with Digital Inline Holography

Dense-field Spray Droplet Size Quantification of Flashing Boiling Atomization Using Structured Laser Illumination Planar Imaging Technique

Investigations on Near-Field Atomization of Flash Boiling Sprays for Gasoline Direct Injection Related Applications

Long-working-distance Microscopic Imaging Through a Scattering Medium Using Supercontinuum Illumination

Speckle-Suppressed Full-Field Imaging Through A Scattering Medium Using A Supercontinuum

Engine spray flow field near-field region optical diagnosis system

Investigation on flash boiling spray fluctuations in the near-field and far-field under gasoline direct injection related conditions

A Study of Near-field Spray Structure under Superheated Conditions of a Gasoline Fuel Spray

FLOW-FIELD INVESTIGATION OF MULTI-HOLE SUPERHEATED SPRAYS USING HIGH-SPEED PIV. PART I.CROSS-SECTIONAL DIRECTION

Phosphorescent Imaging Technique on Simultaneous Measurements of Spray Flows in Heated Air

Simultaneous two-phase flow measurement of spray mixing process by means of high-speed two-color PIV

Interferometric Laser Imaging for Droplet-Size Measurement in Spray

Laser Sheet Dropsizing of Evaporating Sprays Using Simultaneous Lief/Mie Techniques

High-Speed Schlieren Imaging of Vapor Formation in Electrospray Plume