Abstract:Stainless steels with excellent hardness and corrosion resistance performance have been widely used in industrial production. Ternary Fe-Cr-Ni alloys, as a model alloy of nickel chromium stainless steels, are of great importance in the fields of material science. Under non-equilibrium solidification condition, alloys may have new microstructure and improved performance. In this paper, two liquid ternary Fe-Cr-Ni alloys are deeply undercooled and rapidly solidified in a 3-m drop tube to investigate the microstructure evolution and solute distribution of alloy droplets with different sizes. In the drop tube experiments, the Fe-Cr-Ni alloy samples with a mass of 1.5 g are placed in a phi 16 mm x 150 mm quartz tube with a 0.5-mm-diameter orifice at its bottom and heated by induction heating device in a high vacuum chamber. Then the samples are melted and overheated to 200 K above their liquidus temperatures for several seconds. The alloy melt is ejected out of the small orifice and dispersed into numerous droplets after adding high pressure helium gas flow. The alloy droplets with diameters ranging from 68 mu m to 1124 mu m are achieved. After experiments, the alloy droplets with different sizes are mounted respectively. Then they are polished and etched. The drop tube technique provides an efficient way to study the rapid solidification mechanism of alloys. Besides the experiments, the dendrite growth velocities of primary phase in two Fe-Cr-Ni alloys are calculated theoretically using the modified LKT/BCT model. As droplet size decreases, both cooling rate and undercooling increase exponentially and the morphologies of two alloys become well refined. Under the near-equilibrium solidification condition with a cooling rate of 10 K/min, both alloys consist of coarse lath-like alpha phase. After rapid solidification of Fe81.4Cr13.9Ni4.7 alloy droplets during free fall, the microstructure presents a lath-like a phase, resulting from the solid-solid phase transition. As undercooling increases, the primary delta phase is converted from the coarse dendrite with long trunk into equiaxed grain. For Fe81.4Cr4.7Ni13.9 alloy, the microstructure is composed of alpha phase grains. The transition of primar gamma phase from coarse dendrite with long trunk to refined equiaxed grain occurs as the undercooling increases. Meanwhile, both dendrite trunk length and secondary dendrite arm spacing decrease drastically, suggesting that the rapid solidification is the main reason for grain refinement. Moreover, the relative segregation degree of solute Cr and Ni inside alpha phase grain also decreases obviously with the increase of undercooling, and the microsegregation of Ni is more remarkable than that of Cr. This suggests that the high cooling rate and undercooling cause the solute to be distributed evenly. Compared with that of gamma phase, the dendrite growth velocity of delta phase is large and its dendrite tip radius is small. The two phase transform from solute diffusion controlled growth into thermal diffusion controlled growth as undercooling increases to 8 K. When undercooling is larger than 8 K and within the experimental undercooling range, the dendrite growth of both Fe-Cr-Ni alloys is controlled by thermal diffusion.

Sluggish Dendrite Growth in an Undercooled High Entropy Alloy

Observation of Dendrite Growth Velocity and Microstructure Transition in Highly Undercooled Single Phase Alloys

Dendrite growth during rapid solidification of Co-Sb alloys

Rapid Dendritic Growth Within an Undercooled Ni–Cu–Fe–Sn–Ge Quinary Alloy

Dendrite growth and grain “coarsening” in an undercooled CoNi equiatomic alloy

Rapid dendrite growth mechanism and solute distribution in liquid ternary Fe-Cr-Ni alloys

Dendritic Solidification and Physical Properties of Co-4.54%Sn Alloy with Broad Mushy Zone

Rapid Dendrite Growth in Quaternary Ni-based Alloys

Rapid dendritic solidification and structure hardening mechanism of substantially undercooled quaternary nickel alloys

Primary Dendrite Growth of Ni3Sn Intermetallic Compound During Rapid Solidification of Undercooled Ni-Sn-Ge Alloy

Dendrite Growth Kinetics and Microstructure Evolution Mechanism of Ni2tial Intermetallic Compound Within Substantially Undercooled Liquid Ni64al19ti17 Alloy

Sluggish dendrite growth in undercooled Fe-Co-Ni-Si multi-principal element intermetallics

Solute Redistribution and Micromechanical Properties of Rapidly Solidified Multicomponent Ni-based Alloys

Effect of Minor Addition of Co on Nonequilibrium Solidification of Deeply Undercooled Cu Based Alloys

Dendritic Growth Velocities of the Intermetallic Compounds Ni2TiAl, NiTi, Ni3Sn, Ni3Sn2 and FeAl

Growth Velocity-Undercooling Relationship and Structure Refinement Mechanism of Undercooled Ni-Cu Alloys

Effect of Co Addition on Solidification Velocity, Hardness and Refined Structure Transformation Mechanisms of Undercooled Ni-Cu-Co Alloys

A Comparative Study of Dendritic Growth Within Undercooled Liquid Pure Fe and Fe50Cu50 Alloy

Microstructural Characteristics and Electrical Resistivity of Rapidly Solidified Co-Sn Alloys

Dendrite Growth and Micromechanical Properties of Rapidly Solidified Ternary Ni-Fe-Ti Alloy

Atomistic insights into sluggish crystal growth in an undercooled CoNiCrFe multi-principal element alloy