Abstract:Purpose Properties of the parts manufactured by selective laser melting (SLM) depend strongly on the each single laser‐melted track and each single layer, as well as the strength of the connections between them. The purpose of this paper to establish links between the principal SLM parameters (laser power density, scanning speed, layer thickness), properties of the powder and geometrical characteristics of single tracks. This study will provide a theoretical and technical basis for production of parts from metal powders. Design/methodology/approach This paper discusses the SLM parameters affecting on geometrical characteristics of the synthesized single tracks. Granulomorphometric characteristics of powders were studied in detail. A Greco‐Latin square design was used to control geometrical characteristics of the tracks. Analysis of variance (ANOVA) permitted to establish a statistically significant influence of the SLM process parameters on geometry of the single laser‐melted track. Findings The behavior of individual tracks and their geometric characteristics depend on the process parameters, and physical‐chemical and granulomorphometrical properties of the powder. Each powder shows peculiar behavior in the process of single track formation. For stainless steel grade 904L powders with different particle size it was found that the most influencing parameter is the laser power (the following values were applied: 25, 37.5, 50 W), and then, in order of decreasing importance, are the powder layer thickness (60, 90, 120 μm), the scanning speed (0.05, 0.10, 0.15 m/s), and, finally, the particle size. Originality/value The proposed hierarchy of the process parameters is a new systematic study presented by the authors, developed for selective laser melting. Obtained data can be used in surface structuring and micro‐manufacturing characterized by a small number of layers within a part and, thus, sensible to the geometric dimensions and shape of the individual tracks.

Grain Structure and Texture of the SLM Single Track

Band-Like Distribution of Grains in Selective Laser Melting Track under Keyhole Mode

Experimental Characterization and Strengthening Mechanism of Process-Structure-property of Selective Laser Melted 316 L

Experimental Characterization and Yield Strength Model for Process-Structure-Property of Selective Laser Melted 316L

Tailoring grain structure including grain size distribution, morphology, and orientation via building parameters on 316L parts produced by laser powder bed fusion

Coupling Analysis on Microstructure and Residual Stress in Selective Laser Melting (SLM) with Varying Key Process Parameters

Effect of Thermal Cycle on Microstructure Evolution and Mechanical Properties of Selective Laser Melted Low-Alloy Steel

Deformation Mechanisms of Selective Laser Melted 316l Austenitic Stainless Steel in High Temperature Low Cycle Fatigue

Forming and Defect Analysis for Single Track Scanning in Selective Laser Melting of Ti6Al4V

Factor analysis of selective laser melting process parameters and geometrical characteristics of synthesized single tracks

The surface-tension-driven Benard conventions and unique sub-grain cellular microstructures in 316L steel selective laser melting

Effect of laser scanning angle on shear slip behavior along melt track of selective laser melted 316L stainless steel during tensile failure

Effect of Scanning Angle on Grain Growth and Mechanical Properties of Ni10cr6w1fe9ti1 Hea

Microstructure evolution during selective laser melting of metallic materials: A review

TEM Observations of Variation of Dislocation Cell Structures along the Building Direction in SLM-316L Stainless Steel

Effects of laser scanning speed and building direction on the microstructure and mechanical properties of selective laser melted Inconel 718 superalloy

Morphological Development of Sub-Grain Cellular/Bands Microstructures in Selective Laser Melting

Effect of Scanning Strategies on the Microstructure and Mechanical Properties of Ti-22Al-25Nb Alloy Fabricated through Selective Laser Melting

Recrystallization-based grain boundary engineering of 316L stainless steel produced via selective laser melting

Microstructural control in metal laser powder bed fusion additive manufacturing using laser beam shaping strategy

Microstructural evolution and mechanical properties of pure Zn fabricated by selective laser melting