Highly Sensitive, Selective and Stable NO2 Gas Sensors with a Ppb-Level Detection Limit on 2D-Platinum Diselenide Films

Teng-Yu Su,Yu-Ze Chen,Yi-Chung Wang,Shin-Yi Tang,Yu-Chuan Shih,Faliang Cheng,Zhiming M. Wang,Heh-Nan Lin,Yu-Lun Chueh

DOI: https://doi.org/10.1039/c9tc05747a

IF: 6.4

2020-01-01

Journal of Materials Chemistry C

Abstract:High quality PtSe2 can be fabricated under 600 °C and has excellent NO2 sensitivity, which can reach sub ppb level.

What problem does this paper attempt to address?

Highly sensitive, humidity-tolerant and flexible NO2 sensors based on nanoplate Bi2Se3 film

Yanjie Wang,Cheng Tang,Min Su,Yixiong Ji,Lei Xie,Qi Yang,Aijun Du,Yong Zhou,Jun Yang

DOI: https://doi.org/10.1016/j.cclet.2022.107981

IF: 9.1

2022-11-01

Chinese Chemical Letters

Abstract:Recently, two-dimension (2D) materials have fueled considerable interest in the field of gas sensing to cope urgent demands at specific scenarios. Unfortunately, the susceptibility to ambient humidity, and/or fragile operation stability always frustrate their further practicability. To overcome these drawbacks, we proposed one novel flexible gas sensor based on bismuth selenide (Bi2Se3) nanoplates for sensitive NO2 detection at room temperature. The as-prepared Bi2Se3 sensor exhibited favorable sensing performance, including remarkable NO2 selectivity, high response of 120% and fast response time of 81 s toward 5 ppm NO2, an ultralow detection limit of 100 ppb, and nice stability. Besides, the excellent humidity tolerance and mechanical flexibility endowed Bi2Se3 sensors with admirable reliability under harsh working conditions. The first-principles calculation further revealed the insights of extraordinary NO2 selectivity and the underlying gas-sensing mechanism.

chemistry, multidisciplinary
Few-Layer PdSe 2 Nanofilm/Si Heterojunction for Sensing NO 2 at Room Temperature

Jin-Le Fan,Xue-Feng Hu,Can Fu,Wei-Wei Qin,Xin-Jie Min,Jian-Wei Zhao,Lin-Bao Luo,Wei Zhang

DOI: https://doi.org/10.1021/acsanm.1c01339

IF: 6.14

2021-07-11

ACS Applied Nano Materials

Abstract:Palladium diselenide (PdSe2), a noble transition metal dichalcogenide has attracted increasing attention in recent years due to its outstanding semiconductor properties. In this study, 2D PdSe2 nanofilms with thicknesses ranging from 2 to 28 nm and their heterostructures with Si substrates (PdSe2/Si heterostructures) were synthesized via a simple selenization method. Electrical transport characterizations based on field-effect transistor devices indicate that the few-layer PdSe2 nanofilms exhibit a p-type semiconducting behavior. The optimal sensing performance of the PdSe2/Si-8 sensor (8 nm-thick PdSe2) exhibits a comparable response toward NO2 gas (ΔR/Ra = ∼7.2% to 100 ppb and ∼18% to 1 ppm) at room temperature (RT). This response may result from the heterostructure effect and maze-type surface. Additionally, the PdSe2/Si-8 sensor has selectivity toward NO2 compared with other gases including NO, H2, CO, NH3, and C2H5OH. Furthermore, density functional theory (DFT) calculations reveal the largest adsorption energy and charge transfer between NO2 and the PdSe2 surface, which coincides well with the experimental results. Moreover, the PdSe2/Si-8 sensor also exhibits repeatability and long-term stability during about 4 months at RT. These results indicate that the PdSe2/Si heterostructures may be a promising nanomaterial for room-temperature NO2 gas-sensing devices.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.1c01339?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.1c01339</a>.Supplementary scheme, figures, table, and references (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.1c01339/suppl_file/an1c01339_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Temperature‐Modulated Selective Detection of Part‐per‐Trillion NO2 Using Platinum Nanocluster Sensitized 3D Metal Oxide Nanotube Arrays

Zhilong Song,Wenying Tang,Zhesi Chen,Zhu'an Wan,Chak Lam Jonathan Chan,Chen Wang,Wenhao Ye,Zhiyong Fan

DOI: https://doi.org/10.1002/smll.202203212

IF: 13.3

2022-09-09

Small

Abstract:A wireless sensor system using a platinum nanocluster decorated 3D metal oxide nanotube array significantly enhances the sensitivity and selectivity of NO2 detection, achieving ultrahigh sensitivity with the record limit of detection down to 107 parts per trillion and selective NO2 sensing among the interfering gases, which plays a vital role in future real‐time safety and healthy living monitoring. Semiconductor chemiresistive gas sensors play critical roles in a smart and sustainable city where a safe and healthy environment is the foundation. However, the poor limits of detection and selectivity are the two bottleneck issues limiting their broad applications. Herein, a unique sensor design with a 3D tin oxide (SnO2) nanotube array as the sensing layer and platinum (Pt) nanocluster decoration as the catalytic layer, is demonstrated. The Pt/SnO2 sensor significantly enhances the sensitivity and selectivity of NO2 detection by strengthening the adsorption energy and lowering the activation energy toward NO2. It not only leads to ultrahigh sensitivity to NO2 with a record limit of detection of 107 parts per trillion, but also enables selective NO2 sensing while suppressing the responses to interfering gases. Furthermore, a wireless sensor system integrated with sensors, a microcontroller, and a Bluetooth unit is developed for the practical indoor and on‐road NO2 detection applications. The rational design of the sensors and their successful demonstration pave the way for future real‐time gas monitoring in smart home and smart city applications.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Palladium Phthalocyanine Nanowire-Based Highly Sensitive Sensors for NO2(g) Detection

Crystal Otero Vélez,Soraya Y. Flores,Luis F. Fonseca,Dalice M. Piñero Cruz

DOI: https://doi.org/10.3390/s24061819

IF: 3.9

2024-03-13

Sensors

Abstract:Palladium phthalocyanine (PdPc) nanowires (NWs) were developed to achieve the gas sensing of NO2 in the sub-parts-per-million (ppm) range. Non-substituted metal phthalocyanine are well known for their p-type semiconducting behavior, which is responsible for its gas-sensing capabilities. Nanofabrication of the PdPc NWs was performed by physical vapor deposition (PVD) on an interdigitated gold electrode (IDE). The coordination of palladium in the structure was confirmed with UV–Vis spectroscopy. Gas-sensing experiments for NO2 detection were undertaken at different sensed gas concentrations from 4 ppm to 0.5 ppm at room temperature. In this work, the responses at different gas concentrations are reported. In addition, structural studies of the PdPc NWs with scanning electron microscopy (SEM) and electron-dispersive X-ray diffraction (EDS) are shown.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
2D/0D SnSe2/TiO2 nanocomposites for trace NO2 detection under H2S interference at room temperature

Chengjiu Zhao,Xuezheng Guo,Yanqiao Ding,Chengyao Liang,Bingsheng Du,Wen Niu,Weijie Qu,Yijie Shi,Shuren Cong,Gang Meng,Yong He

DOI: https://doi.org/10.1016/j.snb.2023.134291

2023-10-01

Abstract:Complex gas environments and the demand for room temperature detection will provide challenges for chemo-resistive-type gas sensors in a variety of applications. In this work, 2D/0D SnSe2/TiO2 composite is used as a sensing material, displaying good sensitivity and specificity to ppb-level NO2 at ambient temperature (25 °C). The response value and time of the SnSe2/TiO2 sensor are 207 % and 139s when exposed to 100 ppb NO2, as opposed to 62 % and 183s for the pristine SnSe2 sensor. The composite sensor also offers great long-term stability for NO2 and good gas selectivity. Notably, the SnSe2/TiO2 sensor's mixed gases (NO2+H2S) measurement is done to examine its NO2 detection capacity in the presence of interfering gas. The constructed composite sensor can accurately detect NO2 even if the concentration of the reductive interfering H2S is 66.7 times higher than that of the oxidative target NO2. The effective usage of SnSe2 modified by TiO2 for low-concentration, room-temperature NO2 detection in a complex gas environment is shown by the composite sensor's pleasing gas detection results.

chemistry, analytical,electrochemistry,instruments & instrumentation
Highly Sensitive NO2 Gas Sensors Based on Hexagonal SnS2 Nanoplates Operating at Room Temperature

Zhi Yang,Chen Su,Shutang Wang,Yutong Han,Xinwei Chen,Shusheng Xu,Zhihua Zhou,Nantao Hu,Yanjie Su,Min Zeng

DOI: https://doi.org/10.1088/1361-6528/ab5271

IF: 3.5

2019-01-01

Nanotechnology

Abstract:While continuously developing high-performance chemoresistive gas sensors, reducing device power consumption is not negligible. One of the most efficient ways is to enable gas sensors to work close to room temperature. In this work, we present a gas sensor based on hexagonal tin disulfide (SnS2) nanoplates for sensitive and reversible NO2 sensing at room temperature. Two-dimensional SnS2 nanoplates are synthesized via a facile hydrothermal method using Triton X-100 as a surfactant. The sensor exhibits a high response of 15.6 for 50 ppm NO2 with an experimental limit of detection of 50 ppb at room temperature. Besides, excellent linearity, outstanding selectivity, and reliable long-term stability within 40 d are also demonstrated during the experiment process. The sensing mechanism of this sensor could be explained as the physisorption and charge transfer between NO2 molecules and SnS2 nanoplates, which make it possible for the sensor to work at such a low operating temperature. Our research resulted in a SnS2 nanoplate-based sensor that may pave a new way for effective NO2 detection in the future.
Monolayer PtTe2: A promising candidate for NO2 sensor with ultrahigh sensitivity and selectivity

Jian-Hua Ren,Zi-Han Yang,Tao Huang,Wei-Qing Huang,Wang-Yu Hu,Gui-Fang Huang

DOI: https://doi.org/10.1016/j.physe.2021.114925

2021-10-01

Abstract:Platinum-chalcogen compounds such as platinum dichalcogenides (e.g., PtS2 and PtTe2) have been explored in an effort to study their potential applications in different fields to reduce the use of precious Pt. Herein, the adsorption of NO2, NO, NH3, H2O, CO2, CO and CH4 on monolayer PtTe2 is investigated by using first-principles calculations to exploit its potential applications as gas sensor. Among these gas molecules, only NO2 molecule could be adsorbed on PtTe2 with suitable adsorption strength and apparent charge transfer of 0.4506 e. We further calculate the current-voltage (I–V) relation using the nonequilibrium Green's function (NEGF) method. The transport feature exhibits distinct responses with a dramatic change of I–V relation before and after NO2 adsorption on monolayer PtTe2: an obvious increase of 259 % in current after NO2 adsorption when the applied voltage is 0.98 V. The findings suggest that monolayer PtTe2 is a promising candidate for the NO2 molecule sensor with high selectivity and sensitivity.

English Else
Nanoplates-assembled SnS2 Nanoflowers for Ultrasensitive Ppb-Level NO2 Detection

Di Liu,Zilong Tang,Zhongtai Zhang

DOI: https://doi.org/10.1016/j.snb.2018.06.031

IF: 9.221

2018-01-01

Sensors and Actuators B Chemical

Abstract:Tin disulfide nanostructured material has become a new gas sensing material thanks to its unique sensing properties. However, the mechanism of gas sensing of SnS2 via the adsorption and desorption of gas molecules is not well understood yet. Herein we investigate the sensing behavior of nanosheets-assembled SnS2 nanoflowers prepared by a simple hydrothermal method. The results showed that SnS2 nanoflowers exhibited an excellent response to ppb of NO2 (R-g/R-a = 5.7 to 100 ppb and 25.4 to 500 ppb) at 120 degrees C, which makes them a promising candidate for high-performance low temperature sensing. It was also found that the sample had even higher response to NO2 at N-2 atmosphere, which is different from the conventional chemisorption oxygen model where the presence of oxygen is essential.
An Ultrasensitive NO 2 Gas Sensor Based on a NiO-SnO 2 Composite with a Sub-ppb Detection Limit at Room Temperature

Yanqiao Ding,Bingsheng Du,Xuezheng Guo,Yingchun Dong,Maozhu Zhang,Weifeng Jin,Cao Gao,Di Peng,Yong He

DOI: https://doi.org/10.1016/j.snb.2024.135916

IF: 9.221

2024-05-09

Sensors and Actuators B Chemical

Abstract:The highly sensitive detection of ppb-level NO 2 at room temperature (RT, 25 °C) remains a challenge hindering the detection of metal oxides due to their chemical inactivity. Herein, a strategy for constructing mixed metal oxides with high specific surface areas and highly active surfaces is proposed. In this work, we synthesized NiO-SnO 2 using the solvothermal and calcination methods with Ni/Sn bimetallic organic frameworks (Ni/Sn-BTC MOFs, BTC: benzene-1,3,5-tricarboxylic) as sacrificial templates. The characterization shows that NiO-SnO 2 has a high porosity (0.343 m 3 /g) and a large specific surface area (74.73 m 2 /g), which can produce abundant permeability pathways for NO 2 , maximize the number of active sites, and enhance the capacity for NO 2 capture. The sensing test results indicate that the NiO-SnO 2 sensor exhibits an excellent sensing response of 693.1% (ΔR/R a ) to 150 ppb NO 2 , a fast response/recovery time (86.8/29.4 s), a distinct selectivity, a lower detection limit (25 ppb) and good long-term stability at RT and 60% RH (RH: relative humidity). The outstanding sensing performance can be attributed to the microstructure characteristics, oxygen vacancies and p-n heterojunctions formed between NiO and SnO 2 . The current work provides a versatile platform for designing sensitive materials with heterogeneous structures and opens up a new pathway for the development of room temperature gas sensors based on metal oxide.

chemistry, analytical,electrochemistry,instruments & instrumentation
2D SnSe2 nanoflakes decorated with 1D ZnO nanowires for ppb-level NO2 detection at room temperature

Xuezheng Guo,Yanqiao Ding,Xi Yang,Bingsheng Du,Chengjiu Zhao,Chengyao Liang,Yi Ou,Delin Kuang,Zhilin Wu,Yong He

DOI: https://doi.org/10.1016/j.jhazmat.2021.128061

IF: 13.6

2022-03-01

Journal of Hazardous Materials

Abstract:The detection of air pollutant nitrogen dioxide (NO2) is of great importance arising from its great harm to the ecological environment and human health. However, the detection range of most NO2 sensors is ppm-level, and it is still challenging to achieve lower concentration (ppb-level) NO2 detection. Herein, 2D tin diselenide nanoflakes decorated with 1D zinc oxide nanowires (SnSe2/ZnO) heterojunctions were first reported by facile hydrothermal and ultra-sonication methods. The response of the fabricated SnSe2/ZnO sensor enhances 3.41 times on average compared with that of pure SnSe2 sensor to 50-150 ppb NO2 with a high detection sensitivity (22.57 ppm-1) at room temperature. In addition, the SnSe2/ZnO sensor has complete recovery, negligible cross-sensitivity, and small relative standard deviation (6.98%) during the 1 month sensing test, which can meet the requirements for NO2 detection in environmental monitoring. The enhanced NO2 sensing performance can be attributed to the n-n heterojunction constructed between SnSe2 and ZnO. The as-prepared sensor based on SnSe2/ZnO hybrid significantly promotes the development of the low detection limit of the NO2 sensor at room temperature.

environmental sciences,engineering, environmental
Ultrasensitive Room Temperature NO2 Sensors Based on Liquid Phase Exfoliated WSe2 Nanosheets

Rensong Guo,Yutong Han,Chen Su,Xinwei Chen,Min Zeng,Nantao Hu,Yanjie Su,Zhihua Zhou,Hao Wei,Zhi Yang

DOI: https://doi.org/10.1016/j.snb.2019.127013

IF: 9.221

2019-01-01

Sensors and Actuators B Chemical

Abstract:Semiconducting two-dimensional (2D) transition metal dichalcogenides (TMDs) are promising gas-sensing materials due to their large surface-to-volume ratio, layered structures, susceptible surfaces, and excellent conductivities. Herein, a simple and effective method has been developed to exfoliate tungsten diselenide (WSe2) into few-layered nanosheets with N-methyl-2-pyrrolidone (NMP) as a dispersant. The gas sensor based on the assynthesized WSe 2 nanosheets shows an extremely high response (50 ppb, 5.06) under a low detection concentration of nitrogen dioxide (NO2) at room temperature (25 degrees C), which is much higher than many other reports for 2D TMDs-based gas sensors. Additionally, our sensor also exhibits a response of 11.01 to 10 ppm NO2, an excellent selectivity, and a reliable long-term stability within 8 weeks. It is expected that the outstanding performances of the gas sensors based on WSe2 nanosheets reported in the present work will make WSe2 a promising candidate for ultrasensitive NO2 sensing applications.
A Highly Sensitivity and Selectivity Pt-SnO2 Nanoparticles for Sensing Applications at Extremely Low Level Hydrogen Gas Detection

Xi-Tao Yin,Wen-Dong Zhou,Jing Li,Qi Wang,Fa-Yu Wu,Davoud Dastan,Dong Wang,Hamid Garmestani,Xiang-Min Wang,Stefan Talu

DOI: https://doi.org/10.1016/j.jallcom.2019.07.081

IF: 6.2

2019-01-01

Journal of Alloys and Compounds

Abstract:Undecorated and Pt-decorated SnO2 nanoparticles (NPs) were prepared using sol-gel and hydrothermal methods. The tin dioxide NPs, as sensing materials, were screen printed on alumina substrates with Pt test electrode to fabricate the gas sensors. The characteristics of these gas sensors in terms of composition, morphology, and sensing property were investigated by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), and electrochemical workstation, respectively. The results elucidated that the response time of Pt-decorated SnO2 sensor to 100 ppm H-2 is 29 s at 350 degrees C, which is almost half of that of pure SnO2 gas sensor. Meanwhile, the effect of operating temperature and Pt decorating on the sensing properties and the 'n' value is studied. Comparing with many fabricated H-2 gas sensors, our as-prepared sensor exhibits not only a high response time but also detects H-2 gas down to 0.08 ppm. To the author's best knowledge, the detection limit of 0.08 ppm is the best reported detection limit for the gas sensors based on tin oxide NPs so far. Moreover, there is a significant enhancement in the selectivity of Pt-decorated SnO2 sensor to the H-2 gas against other investigated gases such as carbon monoxide (CO), methane (CH4), nitrogen dioxide (NO2), sulfur dioxide (SO2). Overall, the obtained results clearly demonstrate that the Pt-decorated SnO2 is an excellent sensing material for the fabrication of gas sensors and the detection of trace concentration of H-2 down to 0.08 ppm. Furthermore, the results of statistical and fractal analysis on 2D microstructures of FESEM images showed a coefficient correlation of about 0.991 for all the samples. (C) 2019 Elsevier B.V. All rights reserved.
Controllable Oxygen‐Incorporated 2D‐SnSe 2 Layered Thin Film by Plasma‐Assisted Selenization Process with Enhanced NO 2 Gas Sensitivity and Improved Humidity Stability

Kuangye Wang,Tzu‐Wen Kuo,Tzu‐Yi Yang,Ruei‐Hong Cyu,Chen‐Wei Hsu,Yu‐Chieh Hsu,Yi‐Jen Yu,Yu‐Ze Chen,Yu‐Lun Chueh

DOI: https://doi.org/10.1002/admt.202301507

IF: 6.8

2023-11-08

Advanced Materials Technologies

Abstract:Abstract Herein, oxygen‐incorporated 2D‐SnSe 2 layered films are successfully fabricated by a plasma‐assisted selenization process. The oxygen concentrations inside the 2D‐SnSe 2 layered film are controllable by controlling the proportion of hydrogen in the mixed gas of nitrogen and hydrogen during the plasma‐assisted selenization reaction. Oxygen atoms mainly exist in the form of the incorporated oxygen in the 2D‐SnSe 2 layered film with an exceedingly small grain size of SnO 2 , which significantly increases the total interface area of the SnO 2 /SnSe 2 . Significant enhancement of the gas response to NO 2 (709% under 100 ppb NO 2 ) is reached when the proportion of hydrogen during the plasma‐assisted selenization process is 25%, thus showing excellent sensitivity and selectivity. Moreover, the sensor also demonstrated excellent stability under an increase in relative humidity. It is verified that the response will not significantly decrease when the relative humidity is below 90%. The obtained results demonstrate that oxygen‐incorporated 2D‐SnSe 2 layered film with excellent commercial potential, is a highly suitable candidate for next‐generation gas sensors.

materials science, multidisciplinary
Visible-Light-Enhanced NO 2 Sensing Based on the Hybrid Orthorhombic/Monoclinic-PdSe 2 Nanostructures

Jinle Fan,Xuefeng Hu,Weiwei Qin,Ming Zhou,Zhi-Yuan Liu,Shou-Jing Gao,Li-Ping Tan,Lin-Bao Luo,Wei Zhang

DOI: https://doi.org/10.1021/acsanm.2c05068

IF: 6.14

2023-02-07

ACS Applied Nano Materials

Abstract:Palladium diselenide (PdSe2), as a member of two-dimensional dichalcogenides, has a puckered pentagonal structure and tends to exhibit distinct physical properties due to the various polymorphic phases. In contrast to conventionally orthorhombic PdSe2 (O-PdSe2), the fabrication of continuous metastable monoclinic PdSe2 (M-PdSe2) remains a challenge. Here, we report the polymorphic integration of orthorhombic and monoclinic PdSe2 crystals by concisely controlled selenization engineering under Se-sufficient and Se-deficient growth conditions. Thus, the hybrid O-PdSe2/M-PdSe2 (O/M-PdSe2) nanostructures were fabricated for the first time. We found that the O/M-PdSe2 nanostructures may be used as the broadband photodetector with a relatively high responsivity of 211.4 mA W–1, laying the foundation for the expansion of high-performance photoexcited gas sensors operating at room temperature. The O/M-PdSe2 sensor exhibited extremely fast response and recovery times (132/84 s) toward 10 ppm NO2 gas under 405 nm light illumination compared to the dark condition. In addition, according to the optical absorption spectra and ultraviolet photoemission spectroscopy analyses, the energy band alignment at the O/M-PdSe2 interface was determined, and the detailed gas-sensing mechanism was also proposed on this basis. This work realizes the continuous fabrication of the hybrid O/M-PdSe2 nanostructures with promisingly combined photoelectric and gas-electric properties, which may promote the development of high-performance multifunctional nanoelectronic devices to meet the global challenges of energy shortage and environmental protection.

materials science, multidisciplinary,nanoscience & nanotechnology
Engineering SnO 2 nanorods/ethylenediamine-modified graphene heterojunctions with selective adsorption and electronic structure modulation for ultrasensitive room-temperature NO 2 detection

Shengliang Zheng,Jianyong Sun,Juanyuan Hao,Quan Sun,Peng Wan,Yue Li,Xin Zhou,Ye Yuan,Xu Zhang,You Wang

DOI: https://doi.org/10.1088/1361-6528/abd657

IF: 3.5

2021-01-25

Nanotechnology

Abstract:Abstract Ever-increasing concerns over air quality and the newly emerged internet of things (IoT) for future environmental monitoring are stimulating the development of ultrasensitive room-temperature gas sensors, especially for nitrogen dioxide (NO 2 ), one of the most harmful air pollution species released round-the-clock from power plants and vehicle exhausts. Herein, tin dioxide nanorods/ethylenediamine-modified reduced graphene oxide (SnO 2 /EDA-rGO) heterojunctions with selective adsorption and electronic structure modulation were engineered for highly sensitive and selective detection of NO 2 at room temperature. The modified EDA groups not only enable selective adsorption to significantly enrich NO 2 molecules around the interface but also realize a favorable modulation of SnO 2 /EDA-rGO electronic structure by increasing the Fermi level of rGO, through which the sensing performance of NO 2 is synergistically enhanced. The response of the SnO 2 /EDA-rGO sensor toward 1 ppm NO 2 reaches 282%, which exceeds the corresponding SnO 2 /rGO sensor by a factor of 2.8. It also exhibits a low detection limit down to 100 ppb, enhanced selectivity, and rapid response/recovery kinetics. This approach to designing a novel heterojunction with significantly enhanced chemical and electric effects may shed light on the future engineering of gas-sensing materials.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Highly sensitive and low detection limit NO2 gas sensor based on In2O3 nanoparticles modified peach kernel-like GaN composites

Hongtao Wang,Hongtao Wang,Zhilin Feng,Zhilin Feng,Yaodan Zhang,Yaodan Zhang,Dan Han,Dan Han,Jianan Ma,Jianan Ma,Xiaojie Chai,Xiaojie Chai,Shengbo Sang,Shengbo Sang

DOI: https://doi.org/10.1016/j.snb.2023.133452

2023-05-01

Abstract:The effective detection of ppb-level NO2 is of great significance to the natural environment and human health. In this work, a series of In2O3 nanoparticles modified peach kernel-like GaN for NO2 detection was synthesized by a concise two-step method. The gas-sensing results showed that 10 mol% In2O3-decorated GaN (In: Ga) exhibited a response as high as 1070.9–1 ppm NO2 at the working temperature of 100 °C, as well as a low limit of detection (1 ppb). Furthermore, the sensor also possessed excellent selectivity, repeatability and fast response-recovery speed. The outstanding sensing performance was contributed to the rough and porous microstructure of GaN, abundant negative oxygen ion species originating from In2O3, and the heterojunction effect between GaN and In2O3. The sensor proposed herein provide a useful reference for reliable detection of ppb-level NO2 gas.

chemistry, analytical,electrochemistry,instruments & instrumentation
Lead-Free Halide Cs 2 PtI 6 Perovskite Favoring Pt–N Bonding for Trace NO Detection

Ze-Kun Chen,Wen Ye,Hong-Zhen Lin,Chuang Yu,Jing-Hui He,Jian-Mei Lu

DOI: https://doi.org/10.1021/acssensors.1c01791

IF: 8.9

2021-09-22

ACS Sensors

Abstract:In recent years, the performance research of perovskite materials is not only concentrated in the field of solar cells or optics, but the field of gas sensing has gradually entered the public view. However, the detection of nitric oxide (NO) by lead-free halide perovskites has not yet been reported. Herein, we use Cs2PtI6 to realize the first example of a halide perovskite applied to NO sensing. Due to favoring Pt–N binding, the material has some excellent properties such as a NO detection limit as low as 100 parts-per-billion (ppb), ultrahigh selectivity to NO, and can work at room temperature for more than 2 months. In situ sum frequency generation (SFG) spectra and crystal orbital Hamilton population (COHP) analysis reveal that the strong bonding interaction between Pt 5s and N 2s ensure the high adsorption energy, and Pt 5d electron back donation to N 2px, N 2pz antibonding causes the conductive change of the sensors. In addition, its flexible wearable technology shows the application potential of the device and promotes the further development of perovskite materials.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssensors.1c01791.Comparison of performance for some recent reported metal oxide semiconductors nitric oxide sensors of different types (Table S1); EDX mapping images of a Cs2PtI6 octahedron (Figure S1); low-magnification SEM figure of the electrodes where the material is deposited on them (Figure S2); SAED pattern and thermogravimetric analysis curve of Cs2PtI6 octahedrons (Figure S3); photograph of the sensor device and the thickness of the sensor film (Figure S4); gas sensor test system (Figure S5); temporal responses with increasing NO concentrations in the range of 100 ppb–10 ppm (Figure S6); influence of different temperatures on curve recovery (Figure S7); SEM images with EDS stoichiometry and the XRD pattern of pristine Cs2PtI6 and treated NO (Figure S8); repeatability of the sensor based on Cs2PtI6 toward 500 ppb, 1 ppm, 4 ppm, and 10 ppm NO (Figure S9); effect of environmental temperature to the sensor based on Cs2PtI6 with 10 ppm NO (Figure S10); effect of different relative humidities to the sensor based on Cs2PtI6 with 1, 2, 4, and 8 ppm NO (Figure S11); effect of light intensity to the sensor based on Cs2PtI6 with 400 ppb, 600 ppb, 800 ppb, and 1 ppm NO (Figure S12); the charge distribution and the O–Pt bond length of NO adsorbed on the surface of Cs2PtI6 (Figure S13); flexibility and stability of the Cs2PtI6 sensor (Figure S14); flexibility when the wrist is naturally bent downward to different degrees (Figure S15); flexibility when the wrist is naturally bent upward with different degrees (Figure S16); and schematic illustration of the preparation of the NO sensor device (Figure S17) (PDF)This article has not yet been cited by other publications.

chemistry, multidisciplinary, analytical,nanoscience & nanotechnology
Ultrasensitive and reversible NO2 gas sensor based on SnS2/TiO2 heterostructures for room temperature applications

P Bharathi,S Harish,M Shimomura,M Krishna Mohan,J Archana,M Navaneethan

DOI: https://doi.org/10.1016/j.chemosphere.2023.140486

IF: 8.8

Chemosphere

Abstract:Nitrogen dioxide (NO2) is one of the toxic gases produced by chemical industries, power plants, and vehicles. In this work, we demonstrate an inexpensive sensing platform for NO2 detection at room temperature (RT-32 °C) based on a charge transfer mechanism. Three-dimensional hierarchical SnS2 and SnS2/mesoporous TiO2 nanocomposites were synthesized via the solvothermal method. SnS2/20 wt% mesoporous TiO2 nanocomposites sample showed 245.4% enhanced response compared to pristine SnS2. The fabricated device exhibits excellent selectivity among all other interfering gases with one-month stability. The rapid response and enhanced response achieved were obtained for the minimum concentration of 2 ppm NO2. The formation of heterojunction between SnS2 and mesoporous TiO2 has a synergetic effect, providing more active sites and porous structures for the detection of NO2 gas molecules.
High-Performance No2 Sensors Based On Chemically Modified Graphene

Wenjing Yuan,Anran Liu,Liang Huang,Chun Li,Gaoquan Shi

DOI: https://doi.org/10.1002/adma.201203172

IF: 29.4

2013-01-01

Advanced Materials

Abstract:Covalently grafting reduced graphene oxide (rGO) sheets with sulfophenyl or ethylenediamine groups can produce chemically modified graphene (CMG) for fabricating high-performance gas sensors. The NO(2) sensors based on these CMGs exhibit sensitivities 4 to 16 times higher than that of a sensor based on rGO. They also show excellent selectivity and repeatability without the aid of UV-light or thermal treatment.
N-Doped Carbon Dots/Sns2 Heterostructures for Ultra-Fast and Sub-Ppb-Level Detection of No2 in Multiple Environments

Ping Guo,Xinxin He,Xuyang An,Xingyu Zhang,Shuai Liang,Jia Zhang,Yongqing Fu

DOI: https://doi.org/10.1016/j.cej.2024.156882

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:Nitrogen dioxide (NO2) 2 ) is one of the most common toxic gases, which not only impairs human health but also produces secondary pollutants induced by sunlight via associated photochemical reactions. Herein, we design a high-performance NO2 2 sensor based on the N-doped carbon dots/SnS2 2 (N-CDs/SnS2) 2 ) heterostructure using density functional theory (DFT) calculations. The DFT results approve that the decoration of N-doped carbon dots (N-CDs) onto the SnS2 2 nanosheet enhances adsorption capacity and electron transportation compared with those of pure SnS2, 2 , significantly enhancing the sensing responses. In addition, these in-situ synthesized N-CDs onto SnS2 2 nanosheet leads to band alignment, thereby significantly improves conductivity and enhances transportation and storage properties of carriers via a synergistic interaction. Furthermore, employment of UV illumination significantly increases active adsorption sites and enhances response and recovery kinetics. As a result, the developed NO2 2 sensor achieves fast responses of a few seconds and a limit of detection down to sub-ppb-level with the help of UV illumination. It also shows good linearly, operated in both air and oxygen-free environments, at both room or low temperature (238 K) conditions. The developed multi-framework offers an efficient and precision detection of NO2 2 with ultrafast responses and ultralow concentrations in multiple environments.

Highly Sensitive, Selective and Stable NO2 Gas Sensors with a Ppb-Level Detection Limit on 2D-Platinum Diselenide Films

Highly sensitive, humidity-tolerant and flexible NO2 sensors based on nanoplate Bi2Se3 film

Few-Layer PdSe 2 Nanofilm/Si Heterojunction for Sensing NO 2 at Room Temperature

Temperature‐Modulated Selective Detection of Part‐per‐Trillion NO2 Using Platinum Nanocluster Sensitized 3D Metal Oxide Nanotube Arrays

Palladium Phthalocyanine Nanowire-Based Highly Sensitive Sensors for NO2(g) Detection

2D/0D SnSe2/TiO2 nanocomposites for trace NO2 detection under H2S interference at room temperature

Highly Sensitive NO2 Gas Sensors Based on Hexagonal SnS2 Nanoplates Operating at Room Temperature

Monolayer PtTe2: A promising candidate for NO2 sensor with ultrahigh sensitivity and selectivity

Nanoplates-assembled SnS2 Nanoflowers for Ultrasensitive Ppb-Level NO2 Detection

An Ultrasensitive NO 2 Gas Sensor Based on a NiO-SnO 2 Composite with a Sub-ppb Detection Limit at Room Temperature

2D SnSe2 nanoflakes decorated with 1D ZnO nanowires for ppb-level NO2 detection at room temperature

Ultrasensitive Room Temperature NO2 Sensors Based on Liquid Phase Exfoliated WSe2 Nanosheets

A Highly Sensitivity and Selectivity Pt-SnO2 Nanoparticles for Sensing Applications at Extremely Low Level Hydrogen Gas Detection

Controllable Oxygen‐Incorporated 2D‐SnSe 2 Layered Thin Film by Plasma‐Assisted Selenization Process with Enhanced NO 2 Gas Sensitivity and Improved Humidity Stability

Visible-Light-Enhanced NO 2 Sensing Based on the Hybrid Orthorhombic/Monoclinic-PdSe 2 Nanostructures

Engineering SnO 2 nanorods/ethylenediamine-modified graphene heterojunctions with selective adsorption and electronic structure modulation for ultrasensitive room-temperature NO 2 detection

Highly sensitive and low detection limit NO2 gas sensor based on In2O3 nanoparticles modified peach kernel-like GaN composites

Lead-Free Halide Cs 2 PtI 6 Perovskite Favoring Pt–N Bonding for Trace NO Detection

Ultrasensitive and reversible NO2 gas sensor based on SnS2/TiO2 heterostructures for room temperature applications

High-Performance No2 Sensors Based On Chemically Modified Graphene

N-Doped Carbon Dots/Sns2 Heterostructures for Ultra-Fast and Sub-Ppb-Level Detection of No2 in Multiple Environments