Abstract:Abstract. Upwind horizontal axis wind turbines need to be aligned with the main wind direction to maximize energy yield. Attempts have been made to improve the yaw alignment with advanced measurement equipment but most of these techniques introduce additional costs and rely on alignment tolerances with the rotor axis or the true north. Turbines that are well aligned after commissioning may suffer an alignment degradation during their operational lifetime. Such changes need to be detected as soon as possible to minimize power losses. The objective of this paper is to propose a three-step methodology to improve turbine alignment and detect changes during operational lifetime with standard nacelle metrology (met) mast instruments (here: two cup anemometer and one wind vane). In step one, a reference turbine and an external undisturbed reference wind signal, e.g., met mast or lidar are used to determine flow corrections for the nacelle wind direction instruments to obtain a turbine alignment with optimal power production. Secondly a nacelle wind speed correction enables the application of the previous step without additional external measurement equipment. Step three is a monitoring application and allows the detection of alignment changes on the wind direction measurement device by means of a flow equilibrium between the two anemometers behind the rotor. The three steps are demonstrated at two 2 MW turbines together with a ground-based lidar. A first-order multilinear regression model gives sufficient correction of the flow distortion behind the rotor for our purposes and two wind vane alignment changes are detected with an accuracy of ±1.4∘ within 3 days of operation after the change is introduced. We show that standard turbine equipment is able to align a turbine with sufficient accuracy and changes to its alignment can be detected in a reasonably short time, which helps to minimize power losses.

A method for yaw error alignment of wind turbine based on LiDAR

A Data-Driven Approach for Identification and Compensation of Wind Turbine Inherent Yaw Misalignment

Data-driven yaw misalignment correction for utility-scale wind turbines

LSTM-NN Yaw Control of Wind Turbines Based on Upstream Wind Information

A LiDAR-Based Active Yaw Control Strategy for Optimal Wake Steering in Paired Wind Turbines

Determination of optimal wind turbine alignment into the wind and detection of alignment changes with SCADA data

Wind turbine power prediction considering wake effects with dual laser beam LiDAR measured yaw misalignment

Novel Rotor Effective Wind Speed Estimation Method for Light Detection and Ranging Application

Data-Driven Method for Wind Turbine Yaw Angle Sensor Zero-Point Shifting Fault Detection

Aerodynamic characterization of two tandem wind turbines under yaw misalignment control using actuator line model

Study on Novel Yaw Error Strategy for Wind Turbines Based on a Multi-Body Dynamics Method

An Improved Yaw Control Algorithm for Wind Turbines via Reinforcement Learning

Yaw Control Strategy and System Design for Wind Turbine

Research on Yaw Error Detection of Wind Turbine Based on Particle Swarm Optimization

Adaptive Continuous Neural Pitch Angle Control for Variable‐Speed Wind Turbines

Optimization of wind turbine yaw angles in a wind farm using a three-dimensional yawed wake model

Incremental Feedforward Collective Pitch Control Method for Wind Turbines

Study of a dynamic effect-based method for wind farm yaw control optimization

An analytical modeling study on yaw-based wake redirection control for large-scale offshore wind farm annual energy power improvement

A machine learning-based fatigue loads and power prediction method for wind turbines under yaw control

Wind farm power optimization via yaw angle control: A wind tunnel study