Abstract:Wake steering, the intentional yaw misalignment of certain turbines in an array, has demonstrated potential as a wind farm control approach to increase collective power. Existing algorithms optimize the yaw misalignment angle set-points using steady-state wake models and either deterministic frameworks or optimizers that account for wind direction and yaw misalignment variability and uncertainty. Wake models rely on parameterizations of physical phenomena in the mean flow field, such as the wake spreading rate. The wake model parameters are uncertain and vary in time at a wind farm depending on the atmospheric conditions, including turbulence intensity, stability, shear, veer, and other atmospheric features. In this study, we develop a yaw set-point optimization approach that includes model parameter uncertainty in addition to wind condition variability and uncertainty. To enable computationally efficient online set-point optimization under model parameter uncertainty, a simplified, approximate parameter distribution estimation method is used. The optimization is tested in open-loop control numerical experiments using utility-scale wind farm operational data for which the set-point optimization framework with parametric uncertainty has a statistically significant impact on the wind farm power production for certain wind turbine layouts at low turbulence intensity, but the results are not significant for all layouts considered nor at higher turbulence intensity. The set-point optimizer is also tested for closed-loop wake steering control of a model wind farm in large eddy simulations of a convective atmospheric boundary layer (ABL). The yaw set-point optimization with model parameter uncertainty reduced the sensitivity of the closed-loop wake steering control to increases in the yaw controller update frequency. Increases in wind farm power production were not statistically significant due to the high ambient power variability in the turbulent, convective ABL.

Study of a dynamic effect-based method for wind farm yaw control optimization

Wind Farm Power Optimization Using System Identification

Multi-Objective Offshore Wind Farm Wake Redirection Optimization for Power Maximization and Load Reduction

Yaw Optimisation for Wind Farm Production Maximisation Based on a Dynamic Wake Model

An analytical modeling study on yaw-based wake redirection control for large-scale offshore wind farm annual energy power improvement

Dynamic wake steering control for maximizing wind farm power based on a physics-guided neural network dynamic wake model

Wake Optimization Considering Fluctuating Limitations Caused byWind Speed Attenuation

Optimization of wind turbine yaw angles in a wind farm using a three-dimensional yawed wake model

Wind farm power optimization via yaw angle control: A wind tunnel study

A LiDAR-Based Active Yaw Control Strategy for Optimal Wake Steering in Paired Wind Turbines

LSTM-NN Yaw Control of Wind Turbines Based on Upstream Wind Information

Two-stage ADMM-based Distributed Optimal Reactive Power Control Method for Wind Farms Considering Wake Effects

Synchronized optimization of wind farm start-stop and yaw control based on 3D wake model

Research on a Rapid Active Power Control Method for Wind Farms Based on Dynamic Operating Points

Wind farm power optimization through wake steering

A Data-Driven Approach for Identification and Compensation of Wind Turbine Inherent Yaw Misalignment

Wind Farm Power Maximisation via Wake Steering: A Gaussian Process‐Based Yaw‐Dependent Parameter Tuning Approach

Study on equivalent fatigue damage of two in-a-line wind turbines under yaw-based optimum control

Particle swarm optimization of a wind farm layout with active control of turbine yaws

A Data-Driven Reduced-Order Modeling Method for Dynamic Wind Farm Control.

Wind farm yaw control set-point optimization under model parameter uncertainty