Abstract:Reinforced concrete is one of the most commonly used materials in the construction industry. The most and main causes of reinforcement corrosion in concrete structures are chloride attack and carbonation. Many studies have been carried out in this field so far, but due to the multitude of influencing factors and their complexity, different results have been obtained. In this study, reinforced concrete samples were prepared and investigated to monitor the threshold of chloride concentration for corrosion of SD345 carbon steel rebar using the electrochemical impedance spectroscopy (EIS) and half-cell potential (HCP) tests. A series of electrolyte solutions containing different NaCl contents, that is, 0, 1, 2 and 3 wt%, were used to simulate the chloride environment. Given that the HCP values are relatively low for carbon steel rebars, there are a high possibility for corrosion of all samples. By increasing the NaCl content in electrolyte solution, the current density values were increased from the early stages, indicating corrosion enhancement in the samples with increasing chloride ions in solution. The EIS results show that resistance of passive film gradually decreased by increasing the chloride concentration which shows that non-protective corrosion and porous products have been advanced on the surface of steel rebar. Furthermore, the EIS findings indicated an obviously increase of charge transfer resistance and a clearly reduction in the non-ideal interfacial capacitance after 16 weeks exposed to 2 wt% NaCl solution which can be attributed to the high degree of hydration and the efficiently refined the pore structure of the reinforced concretes. Scanning electron microscopy analysis confirmed the results obtained by electrochemical experiments.

Chloride Resistance of Cr-bearing Alloy Steels in Carbonated Concrete Pore Solutions

Developing a Novel Expression for Chloride Ion Concentration Threshold in Reinforced Concrete: Integration of Electrochemical Analysis and Time-Dependent Modeling

Chloride-induced Corrosion Resistance of Low-Alloyed Reinforcement Steels in Two Different Ph Simulated Concrete Solution

Threshold Chloride Concentration of Stainless Steels in Simulated Concrete Pore Solution

Influence of Threshold Chloride Concentration on Corrosion Behavior of Low-Alloy Steel Rebar in Concrete Pore Solutions

Influence of Chloride Concentration and Pre-Passivation on the Pitting Corrosion Resistance of Low-Alloy Reinforcing Steel in Simulated Concrete Pore Solution

Passive Behaviour of New Alloy Corrosion Resistant Steel Cr10Mo1 in Simulating Concrete Pore Solutions with Different Chloride Contents

Chloride-induced Corrosion Patterns of Reinforcements in Simulated Pore Solutions of Calcium Sulfoaluminate Cement Concrete: an Analytical Study

Enhanced Corrosion Resistance of Reinforcing Steels in Simulated Concrete Pore Solution with Low Molybdate to Chloride Ratios

Corrosion Resistance of a Cr-Bearing Low-Alloy Reinforcing Steel: Effect of Surface Condition, Alkaline Solution, and Chloride Content

Corrosion Resistance of Cr-bearing Rebar in Simulated Concrete Pore Solutions

Passive Behavior of New Alloy Corrosion Resistant Steel Cr10Mo1 in Chloride-containing Environment

Pitting Corrosion Behaviour of New Corrosion-Resistant Reinforcement Bars in Chloride-Containing Concrete Pore Solution

Threshold Level of Chloride Ions for Corrosion of SD345 Carbon Steel Reinforcement in Concrete

Critical Chloride Ion Concentration of Steel Fiber Corrosion in Simulated Concrete Pore Solution

Corrosion Behavior of Cr/RE Alloyed Rebar in Carbonated Simulated Concrete Pore Solutions with Chloride Ions

Corrosion resistance of low-alloy steel in concrete subjected to long-term chloride attack: Characterization of surface conditions and rust layers

EIS analysis on chloride-induced corrosion behavior of reinforcement steel in simulated carbonated concrete pore solutions

Long-Term Electrochemical Behavior of Low-Alloy Steel in Simulated Concrete Pore Solution with Chlorides

Corrosion of Carbon Steels Subjected to Chloride and Sulfate in Simulated Concrete Pore Solutions with Different Ph

INFLUENCE OF CARBONATION ON THE CORROSION PERFORMANCE OF STEEL HRB335 IN SIMULATED CONCRETE PORE SOLUTION