Abstract:Solid oxide cell (SOC) is the energy conversion device with a series of advantages such as high efficiency, environmental friendliness and durability, making it a promising way to deal with environmental pollution and energy crisis appearing with the development of human society. Perovskite oxides with hetero-phases which were prepared by in-situ exsolution are widely used as fuel electrode in SOC. In this work, Ni-doped perovskites Ruddlesden–Popper oxides, (La , Sr) n Ti n O 3n-2 with n = 5, 8, and 12 (LSTNn), were synthesized to design novel exsolution materials as solid oxide fuel cell anodes and for electrochemical catalysis applications. Compared with pure LSTNn without Ni, a small A-site deficiency (10%) promoted the exsolution of Ni from the perovskite oxides of Ni-doped LSTNn. It is found that the morphology as well as electrochemical activity of LSTNn anodes can be successfully manipulated by the exsolution of Ni. Since more Ni nanoparticles are exsolved from the parent oxides, LSTN8 displays better electrochemical performance by providing more active sides during the hydrogen oxidation reaction and significantly lowering electrode polarization resistance. DRT analysis is conducted to study substeps of the whole electrode reaction, finding that in-situ precipitation improves rate-limiting steps much. The CO 2 reduction reaction performance of LSTN materials is also studied, finding that in-situ grown nanoparticles on surface of LSTN significantly increases the density of surface active sites and three phase boundaries (TPBs), which are beneficial for CO 2 adsorption and subsequent conversion. It is clear from these results that varying Ni-doping in Ruddlesden–Popper oxides is a key factor in controlling the electrochemical performance and catalytic activity for hydrogen oxidation reaction in solid oxide fuel cells.

Exsolution of Cu nanoparticles in (LaSr)<sub>0.9</sub>Fe<sub>0.9</sub>Cu<sub>0.1</sub>O<sub>4</sub> Ruddlesden-Popper oxide as symmetrical electrode for solid oxide cells

In-situ Growth of Ru/RuO2 Nanoparticles Decorated (la0.6sr1.4)0.95mn0.9ru 0.1O4 As a Potential Electrode for Symmetrical Solid Oxide Fuel Cells

In-situ growth of Ru/RuO2 nanoparticles decorated (La0.6Sr1.4)0.95Mn0.9Ru0.1O4 as a potential electrode for symmetrical solid oxide fuel cells

In-Situ Growth of Ru/RuO <sub>2</sub> Nanoparticles Decorated (la <sub>0.6</sub>sr <sub>1.4</sub>) <sub>0.95</sub>mn <sub>0.9</sub>ru <sub>0.1</sub>o <sub>4</sub> As a Potential Electrode for Symmetrical Solid Oxide Fuel Cells

Leveraging in-situ formation of Ni–Fe nanoparticles to promote the catalytic performance of Ruddlesden-Popper based electrode for symmetrical solid oxide fuel cells

Copper Oxide As a Synergistic Catalyst for the Oxygen Reduction Reaction on La0.6Sr0.4Co0.2Fe0.8O3−δ Perovskite Structured Electrocatalyst

In situ exsolved Co–Fe nanoparticles on the Ruddlesden-Popper-type symmetric electrodes for intermediate temperature solid oxide fuel cells

Further Optimization of the Properties of Pr0.6Sr0.4Fe0.9W0.1O3-δ by Cu-doping As Symmetric Electrodes for Solid Oxide Fuel Cells

A Cobalt-Free Electrode Material La0.5Sr0.5Fe0.8Cu0.2O3 − Δ for Symmetrical Solid Oxide Fuel Cells

Surface regulating of copper-iron nanoparticles bimetallic exsolution for enhanced performance and durability of double perovskite anode in solid oxide fuel cells

Nickel Enriched Ruddlesden-Popper Type Lanthanum Strontium Manganite As Electrode for Symmetrical Solid Oxide Fuel Cell

Tuning Exsolution of Nanoparticles in Defect Engineered Ruddlesden–Popper Oxides for Efficient CO2 Electrolysis

In Situ Growth of Nanoparticles in Layered Perovskite La0.8Sr1.2Fe0.9Co0.1O4−δ As an Active and Stable Electrode for Symmetrical Solid Oxide Fuel Cells

Nanoscale architecture of (La0.6Sr1.4)0.95Mn0.9B0.1O4 (B Co, Ni, Cu) Ruddlesden–Popper oxides as efficient and durable catalysts for symmetrical solid oxide fuel cells

A Robust High Performance Cobalt-Free Oxygen Electrode La0.5Sr0.5Fe0.8Cu0.15Nb0.05O3−δ for Reversible Solid Oxide Electrochemical Cell

Cerium and ruthenium co-doped La<sub>0.7</sub>Sr<sub>0.3</sub>FeO3- as a high-efficiency electrode for symmetrical solid oxide fuel cell

New Electrode of La<sub>0.75</sub>Sr<sub>0.25</sub>Mn<sub>0.5</sub>Cr<sub>0.5-X</sub>Cu<sub>x</sub>O<sub>3-δ</sub> (x=0, 0.05, 0.10, 0.20) for Symmetric Solid Oxide Fuel Cell

Electrochemical activity of copper doped Sr2.7Pr0.3Fe2O7− cathode catalysts for solid oxide fuel cells

Highly efficient perovskite-based fuel electrodes for solid oxide electrochemical cells via in-situ nanoparticle exsolution and electron conduction enhancement

Pd-La0.6Sr0.4Co0.2Fe0.8O3-delta composite as active and stable oxygen electrode for reversible solid oxide cells

In-situ exsolved Ni-Cu alloy nanoparticles for optimization of perovskite electrodes in solid oxide electrolysis cell