Abstract:For actual working conditions of fuel cells, the local mixing potential of transient condition can be as high as 1.2 V or even 1.5 V due to the residual water vapor and air during start-up gas exchange, as well as reverse-current decay. Such high transient potential makes the fuel catalysts extremely susceptible to oxidation, resulting in severe performance degradation. In the past two decades, introducing a second metal element to form an alloy with Pt has been a common way to enhance the activity and stability of fuel cell cathode catalysts. However, elements such as Fe, Co and Ni suffer from dissolution under acidic conditions, which can seriously deactivate the catalysts at the cathode and poison the membrane. In this work, tin oxides-decorated Pt nanocatalysts (SnOx-Pt/C) are constructed by a two-step impregnation method and show much better stability owing to the chemical inertness of tin oxides in acidic media. The SnOx-Pt/C catalysts showed good performance in oxygen reduction reaction test, (specifically, < 30% loss in mass activity and < 20% in electrochemical activity area after 40,000 cycle scans from 0.6 to 1.2 V. On the one hand, the tin oxides on the Pt surface help to protect surface Pt atoms from oxidation and detachment; on the other hand, the tin oxides favor the adsorption of hydroxyl groups and, meanwhile, weaken the hydroxyl poison on Pt surface. More importantly, SnOx-Pt/C nanocatalysts achieve higher power density of fuel cells in comparison to Pt/C catalysts, and the Ostwald ripening of Pt nanoparticles is suppressed and the cycle life is significantly improved. The SnOx-Pt/C nanocatalysts show advantages including low cost and facile production, which provides a promising way for the development of stable catalysts for high power density fuel cells.

Ni2P As an Electron Donor Stabilizing Pt for Highly Efficient Isopropanol Fuel Cell

Highly Active Nanoporous Pt-based Alloy As Anode and Cathode Catalyst for Direct Methanol Fuel Cells

Activity of platinum/carbon and palladium/carbon catalysts promoted by Ni2 P in direct ethanol fuel cells

Nitrogen-Doped PtNi Catalysts on Polybenzimidazole-Functionalized Carbon Support for the Oxygen Reduction Reaction in Polymer Electrolyte Membrane Fuel Cells

Ni2P Makes Application of the PtRu Catalyst Much Stronger in Direct Methanol Fuel Cells

Enhanced Activity and Stability of Core–shell Structured PtRuNi Electrocatalysts for Direct Methanol Fuel Cells

Pt0.61Ni/C for High-Efficiency Cathode of Fuel Cells with Superhigh Platinum Utilization

Efficient Ni(OH)2 Supported Ultra-Low Content of Pt Electrocatalyst for Ethanol Oxidation in Alkaline Solution

Highly open one-dimensional PtNi architectures with subnanometer walls as efficient catalysts for alcohol electrooxidation

Hydrogen-assisted scalable preparation of ultrathin Pt shells onto surfactant-free and uniform Pd nanoparticles for highly efficient oxygen reduction reaction in practical fuel cells

Superior Liquid Fuel Oxidation Electrocatalysis Enabled by Novel Bimetallic PtNi Nanorods

Pd@PtRuNi core–shell nanowires as oxygen reduction electrocatalysts

Promoting effect of nickel hydroxide on the electrocatalytic performance of Pt in alkaline solution.

Subnanoscale Dual-Site Pd-Pt Layers Make PdPtCu Nanocrystals CO-Tolerant Bipolar Effective Electrocatalysts for Alcohol Fuel Cell Devices

Tin as “adhesive” in platinum nanoclusters boost power density and durability in PEM fuel cells

Rhombohedral Pd‐Sb Nanoplate with Pd‐Terminated Surface: An Efficient Bifunctional Fuel Cell Catalyst

Ultrathin Ni–N–C layer modified Pt–Ni alloy nanoparticle catalysts for enhanced oxygen reduction

Synergistic effect of Pt-Ni dual single-atoms and alloy nanoparticles as a high-efficiency electrocatalyst to minimize Pt utilization at cathode in polymer electrolyte membrane fuel cells

Highly Durable Fuel Cell Electrocatalyst with Low-Loading Pt-Co Nanoparticles Dispersed Over Single-Atom Pt-Co-N-Graphene Nanofiber

Multicomponent nanoporous Al–Ni–Cu–Pt–Pd–Co as highly stable anode catalysts in a flexible room-temperature pure ethanol–powered solid-state fuel cell

Electrocatalytic performance of sonochemically synthesized Pt–Ni/C nanoparticles in fuel cell application