Simple One-Pot Synthesis of Cu4SnS4 Nanoplates and Temperature-Induced Phase Transformation Mechanism

Xiaoyan Zhang,Yu Tang,Yifeng Wang,Liming Shen,Arunava Gupta,Ningzhong Bao

DOI: https://doi.org/10.1039/c9ce01772k

IF: 3.756

2020-01-01

CrystEngComm

Abstract:A simple one-pot heat-up method has been developed to synthesize Cu4SnS4 nanoplates with highly exposed (002) surfaces.

What problem does this paper attempt to address?

Simple one-pot synthesis of Cu<sub>4</sub>SnS<sub>4</sub> nanoplates and temperature-induced phase transformation mechanism

Xiaoyan Zhang,Yu Tang,Yifeng Wang,Liming Shen,Arunava Gupta,Ningzhong Bao

DOI: https://doi.org/10.1039/c9ce01772k

IF: 3.756

2020-01-01

CrystEngComm

Abstract:A simple one-pot heat-up method has been developed to synthesize Cu4SnS4 nanoplates with highly exposed (002) surfaces.
In Situ Synthesis of Metal Sulfide Nanoparticles Based on 2D Metal-Organic Framework Nanosheets.

Qipeng Lu,Meiting Zhao,Junze Chen,Bo Chen,Chaoliang Tan,Xiao Zhang,Ying Huang,Jian Yang,Feifei Cao,Yifu Yu,Jianfeng Ping,Zhicheng Zhang,Xue-Jun Wu,Hua Zhang

DOI: https://doi.org/10.1002/smll.201600976

IF: 13.3

2016-01-01

Small

Abstract:A facile in situ synthetic method is developed to synthesize metal sulfide nanoparticles based on 2D M-TCPP (M = Cu, Cd, or Co, TCPP = tetrakis(4-carboxyphenyl)porphyrin)) metal-organic framework nanosheets. The obtained CuS/Cu-TCPP composite nanosheet is used as the active material in photoelectrochemical cells, showing notably increased photocurrent due to the improved exciton separation and charge carrier transport.
Facile synthesis of CuSe nanoparticles and high-quality single-crystal two-dimensional hexagonal nanoplatelets with tunable near-infrared optical absorption

Yimin Wu,Ilia Korolkov,Xvsheng Qiao,Xianghua Zhang,Jun Wan,Xianping Fan

DOI: https://doi.org/10.1016/j.jssc.2016.03.048

IF: 3.3

2016-01-01

Journal of Solid State Chemistry

Abstract:A rapid injection approach is used to synthesize the copper selenide nanoparticles and two-dimensional single crystal nanoplates. This technique excludes the use of toxic or expensive materials, increasing the availability of two-dimensional binary chalcogenide semiconductors. The structure of the nanocrystals has been studied and the possible formation mechanism of the nanoplates has been proposed. The optical absorption showed that the nanoplates demonstrated wide and tuneable absorption band in the visible and near infrared region. These nanoplates could be interesting for converting solar energy and for nanophotonic devices operating in the near infrared.
Facile synthesis and characterization of CuInS2 nanocrystals with different structures and shapes

Zhongping Liu,Linlin Wang,Qiaoyan Hao,Dake Wang,Kaibin Tang,Ming Zuo,Qing Yang

DOI: https://doi.org/10.1039/c3ce40631h

IF: 3.756

2013-01-01

CrystEngComm

Abstract:CuInS2 nanocrystals were synthesized by one-pot thermolysis of a mixture solution of metal chlorides, 1-dodecanethiol (DT) and oleic acid in noncoordinating solvent 1-octadecene. Interestingly, in this synthesis, different structures and shapes were obtained by simply varying the dosage of DT. At a low dosage of DT, wurtzite nanoplates formed in the initial reaction stage and then they further grew to nanoplates with wurtzite-zincblende polytypism as the reaction proceeded. On the contrary, a high dosage of DT produced zincblende nanoparticles. The formation processes of nanoplates and nanoparticles were studied and a growth mechanism was proposed. Our research will aid in solution-synthesis of ternary chalcogenide nanocrystals and the development of their optoelectronic devices.
Large-Scale Synthesis and Self-Assembly of Monodisperse Hexagon Cu2S Nanoplates

HT Zhang,G Wu,XH Chen

DOI: https://doi.org/10.1021/la050741j

IF: 3.9

2005-01-01

Langmuir

Abstract:One simple high-temperature solution phase method has been developed to synthesize large-scale, monodisperse, hexgon beta-Cu2S nanoplates. The hexgon nanoplates have edge lengths of 9 +/- 0.5 nm and thicknesses of 4.5 +/- 0.2 nm and self-assemble closely into three-dimensional superlattices. The present results suggest that the simple method might be useful for the synthesis of monodispese hexagon nanoplates for many other chalcogenide semiconductors with hexagonal symmetry structure.
Phase-Selective Synthesis and Self-Assembly of Monodisperse Copper Sulfide Nanocrystals

Hui Zhang,Yiqiang Zhang,Jingxue Yu,Deren Yang

DOI: https://doi.org/10.1021/jp801507h

2008-01-01

Abstract:Single-crystalline, monodisperse copper sulfide nanocrystals with controlled sizes, shapes. and phases were successfully synthesized via a simple, low-cost, and environmentally friendly chemical reaction of CuCl, and S in oleylamine at 100-180 degrees C. It was found that the molar ratios of [CuCl2]:[S] played the critical role for the control of the sizes, shapes, and phases of copper sulfide nanocrystals. The hexagonal CuS nanodisks, hexagonal CuS nanoribbons consisting of face-to-face stacked nanodisks, and monoclinic Cu1.75S nanoribbons consisting of face-to-face stacked nanodisks were obtained when the molar ratios of [CuCl2]:[S] were 1:1, 2:3, and 2:1, respectively. It was believed that the van der Waals force and dipole-dipole interaction were responsible for the self-assembly of copper sulfide nanodisks. Finally, the copper sulfide nanocrystals were characterized by transmission electron microscopy, high-resolution transmission electron micrscopy, X-ray diffraction, and Fourier transform infrared, and its growth mechanism was primarily discussed.
Inorganic Sn-X-Complex-Induced 1d, 2d, and 3d Copper Sulfide Superstructures from Anisotropic Hexagonal Nanoplate Building Blocks

Xiaomin Li,Meijuan Wang,Huaibin Shen,Yongguang Zhang,Hongzhe Wang,Lin Song Li

DOI: https://doi.org/10.1002/chem.201101114

2011-01-01

Chemistry

Abstract:A facile route was demonstrated for inorganic Sn-X-complex-induced syntheses of self-assembled 1D columnar, 2D raftlike, and 3D stratiform anisotropic Cu(2)S hexagonal nanoplates. The factors (reaction time, temperature, the concentration of Sn-X complex, and so on) that influence the size, phase, monodispersity, and self-assembly ability of the Cu(2)S hexagonal nanoplates were studied in detail. It was found that the Sn-X complex could inhibit the growth of the < 001 > direction of monoclinic Cu(2)S nanocrystals, which further induced the formation of the hexagonal lamellar structure. Furthermore, it revealed that the formation of the 1D arrangement was preferred as particles stacked in a face-to-face configuration by maximizing ligand-surface interactions. Then, high ligand density along the side of the 1D columnar arrangement induced well-defined 2D raftlike and 3D stratiform self-assembly.
Facile Synthesis of Monodisperse Cu3SbSe4 Nanoparticles and Thermoelectric Performance of Cu3SbSe4 Nanoparticle-Based Materials

Yimin Wu,Xvsheng Qiao,Xianping Fan,Xianghua Zhang,Shuo Cui,Jun Wan

DOI: https://doi.org/10.1007/s11051-015-3094-2

IF: 2.533

2015-01-01

Journal of Nanoparticle Research

Abstract:In this study, large-scale synthesis of Cu3SbSe4 and Cu3Sb0.98Sn0.02Se4 nanoparticles with a narrow size distribution was achieved through a rapid-injection route. These nanoparticles showed a monodisperse and quasi-spherical morphology. The Cu3SbSe4 and Cu3Sb0.98Sn0.02Se4 nanoparticle-based bulk materials were then prepared by hot-pressed sinter of the nanoparticles, and their thermoelectric performances were systematically studied. Due to the reduced lattice thermal conductivity from enhanced phonon scattering at the grain interfaces of the bulk materials, the maximum ZT value of the Cu3Sb0.98Sn0.02Se4 bulk materials reached 0.50 at 575 K.
Insight into the Crystal Phase and Shape Evolution from Monoclinic Cu1.94S to Wurtzite Cu2ZnSnS4 Nanocrystals

Xiaoyan Zhang,You Xu,Chao Pang,Yifeng Wang,Liming Shen,Arunava Gupta,Ningzhong Bao

DOI: https://doi.org/10.1039/c8ce00048d

IF: 3.756

2018-01-01

CrystEngComm

Abstract:Phase pure wurtzite Cu2ZnSnS4 (CZTS) nanocrystals have been prepared by using monoclinic Cu1.94S nanoplates as starting materials via a hot-injection method. The rapid injection of Zn-thiols resulted in the symmetrical growth of CZTS onto both sides of Cu1.94S nanoplates, yielding sandwich-like CZTS-Cu1.94S heterostructures, which finally converted into CZTS nanocrystals. Interestingly, with 50% excess Sn precursor in the initial reaction system, the morphology of CZTS can retain the shape of nanoplates with increased thickness. The morphology and crystal phase evolution processes have been further investigated to understand the formation mechanism. These findings are meaningful for the controllable synthesis of copper chalcogenide nanocrystals as well as their photoelectrical applications.
Synthesis of hexagonal structured wurtzite and chalcopyrite CuInS 2 via a simple solution route

Xia Sheng,Lei Wang,Yeping Luo,Deren Yang

DOI: https://doi.org/10.1186/1556-276X-6-562

2011-01-01

Nanoscale Research Letters

Abstract:Wurtzite semiconductor CuInS 2 [CIS] has been reported in recent years. As a kind of metastable structure, it is a great challenge to synthesize pure wurtzite CIS at low temperature. In this paper, via a simple and quick solution route, we synthesize both wurtzite- and chalcopyrite-structure CIS. Well-controlled wurtzite CIS hexagonal plates are obtained when an appropriate agent is added. The influence of the used agent triethanolamine [TEA] has also been studied, and it turns out that without TEA, chalcopyrite CIS with a kind of rare morphology is formed through this method.
Large-scale synthesis of single-crystalline CuO nanoplatelets by a hydrothermal process

Qi Liu,Hongjiang Liu,Yongye Liang,Zheng Xu,Gui Yin

DOI: https://doi.org/10.1016/j.materresbull.2005.10.013

IF: 5.6

2006-01-01

Materials Research Bulletin

Abstract:Two-dimensional CuO nanoplatelets were synthesized by a facile hydrothermal treatment of cupric dodecylsulfate (Cu(DS)2) and NaOH aqueous solution at 120°C. The products were characterized by powder X-ray diffraction, transmission electron microscopy, scanning electron microscopy, selected area electron diffraction, X-ray photoelectron spectroscopy and UV–vis absorption spectroscopy, respectively. A possible mechanism was also proposed to account for the growth of these CuO nanoplatelets.
Controllable Transformation from Rhombohedral Cu1.8S Nanocrystals to Hexagonal CuS Clusters: Phase- and Composition-Dependent Plasmonic Properties

Lige Liu,Haizheng Zhong,Zelong Bai,Teng Zhang,Wenping Fu,Lijie Shi,Haiyan Xie,Luogen Deng,Bingsuo Zou

DOI: https://doi.org/10.1021/cm403420u

IF: 10.508

2013-01-01

Chemistry of Materials

Abstract:Because of the rich polymorphs and lower diffusion energy barriers of copper chalcogenide systems, the phase transformation of colloidal Cu2–xS (0 ≤ x ≤ 1) nanocrystals is critical for understanding their fundamental properties and designing convenient synthetic routes. In this work, high quality digenite Cu1.8S nanocrystals with rhombohedral structure were synthesized at gram-scale. The as-prepared colloidal nanocrystals undergo an in situ phase transformation from rhombohedral Cu1.8S nanocrystals to hexagonal CuS clusters upon keeping the resulting colloidal solution for a few days. The observed transformation was explored by a combination of structural and spectroscopic analyses, including powder X-ray diffraction, transmission electron microscopy, energy dispersive spectroscopy, and X-ray photoelectron spectroscopy characterizations. A possible mechanism is proposed and thoroughly discussed. We further determined the evolution of plasmonic absorption spectra during the transformation. The Cu1.8S nanoc...
General Solution Route for Nanoplates of Hexagonal Oxide or Hydroxide

Jianbo Wu,Hui Zhang,Ning Du,Xiangyang Ma,Deren Yang

DOI: https://doi.org/10.1021/jp0603886

2006-01-01

Abstract:A citric acid (CA)-assisted hydrothermal process was used to prepare Fe2O3 hexagonal nanoplates with a lateral size of about 100 nm. In addition, the hexagonal nanoplates of Co(OH)(2), MnCO3, and Ni(OH)(2) were also synthesized by this route, indicative of the universality of the solution route presented herein. The morphologies and structures of the synthesized platelike nanostructures have been characterized by transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), and X-ray diffraction (XRD). Furthermore, the mechanism for the formation of the platelike nanostructures has been preliminarily discussed. It is believed that the capping molecule of CA, which inhibits crystal growth along the (001) direction due to its chelating effect, plays a critical role in the hydrothermal formation of the nanoplates.
One-Pot Synthesis of BiCuSO Nanosheets under Ambient Atmosphere As Broadband Spectrum Photocatalyst

Huanchun Wang,Junping Ding,Haomin Xu,Lina Qiao,Xuanjun Wang,Yuanhua Lin

DOI: https://doi.org/10.3390/nano9040540

IF: 5.3

2019-01-01

Nanomaterials

Abstract:Cuprous based chalcogenides have attracted intensive research interest due to the potential applications in solar energy conversion. However, typical fabrications of these compounds are often carried out under severe conditions, such as inert gas protection, high vacuum, and/or extreme high temperature. Here we reported a one-pot process for cuprous based chalcogenides synthesis in aqueous solution. A strategy for BiCuSO nanosheets fabrication without toxic chemicals or rigorous reagents at pretty low temperatures under an ambient atmosphere was established, with the practicality of morphology controlling and the compatibility of multifarious precursors. Platelike BiCuSO with a thickness range from several to hundreds nanometers are fabricated by adjusting the alkali concentration, reaction time, and temperature. The positive effect of alkali hydroxide concentration is proposed cautiously based on the experimental results. The photocatalytic activities of BiCuSO nanosheet under UV, visible, and near-infrared irradiation were also investigated. BiCuSO obtained at room temperature with a thickness of 4.5 nm showed the most impressive efficiency to decompose organic contaminants. Our research presented a new way for cuprous sulfides fabrication, and might open up a new vista for large-scale synthesis of cuprous based materials as promising broadband spectrum light-absorbing materials.
Facile hydrothermal synthesis of hydrotropic Cu2ZnSnS 4 nanocrystal quantum dots: Band-gap engineering and phonon confinement effect

Wenchao Liu,Binglei Guo,Xiaoshan Wu,F. M. Zhang,C. L. Mak,K. H. Wong

DOI: https://doi.org/10.1039/c3ta00357d

IF: 11.9

2013-01-01

Journal of Materials Chemistry A

Abstract:We developed a facile hydrothermal method for synthesizing ultrafine size-controllable earth-abundant Cu2ZnSnS4 (CZTS) nanocrystals using simple Cu(II), Zn(II) and Sn(II) inorganic salts and thiourea in a mixed ethylenediamine and di-water solution as precursors. X-ray diffraction, Raman scattering and transmission electron microscopy confirm that pure kesterite structure CZTS nanocrystals have been synthesized at temperatures as low as 180 degrees C. Broadening of Raman peaks and blue-shift of the absorption edge is attributed to quantum confinement within the nanocrystals. The hydrophilism and tunable band-gap of the CZTS nanocrystals show the potential applications of the nanocrystals for biological labelling and quantum dot based solar cells.
One-Pot Synthesis and Optical Property of Copper(I) Sulfide Nanodisks

Yan Wang,Yongxing Hu,Qiao Zhang,Jianping Ge,Zhenda Lu,Yanbing Hou,Yadong Yin

DOI: https://doi.org/10.1021/ic100473e

IF: 4.6

2010-01-01

Inorganic Chemistry

Abstract:Copper(I) sulfide (Cu(2)S) nanodisks with controllable size and aspect ratio have been synthesized by using a one-pot colloidal process, in which no pre-prepared organometallic precursors are required. The reaction involves the injection of dodecanethiol into a hot solution containing copper salt, surfactants, and a high boiling-point organic solvent. Copper thiolate forms at the beginning of the reaction which effectively acts as a precursor whose decomposition leads to further nucleation and growth of Cu(2)S nanocrystals. The nanocrystals begin as small nanodots in the early stages of the reaction, gradually turning into nanodisks with aspect ratios (average disk diameter divided by thickness) up to 2.0, while the band gap of the nanocrystals decreases accordingly. As the growth of nanocrystals follows the monomer addition mechanism, the diameter, thickness, aspect ratio, and optical property of the Cu(2)S nanodisks can be tuned systematically by changing the reaction time, the amount of surfactants, and the concentration of the precursors. This synthesis provides a simple and highly reproducible method for the preparation of Cu(2)S nanocrystals that may find potential applications in the fabrication of photovoltaic devices.
Columnar self-assembly of Cu2S hexagonal nanoplates induced by tin(IV)-X complex as inorganic surface ligand.

Xiaomin Li,Huaibin Shen,Jinzhong Niu,Sen Li,Yongguang Zhang,Hongzhe Wang,Lin Song Li

DOI: https://doi.org/10.1021/ja103955s

IF: 15

2010-01-01

Journal of the American Chemical Society

Abstract:We have prepared columnar self-assembled Cu2S hexagonal nanoplates induced by a Sn-X complex for the first time and demonstrated that the Sn-X complex can affect not only the morphology of the nanocrystals but also the self-assembly ability of the nanocrystals.
Synthesis, Characterization, and Properties of Nanocrystalline Cu2sns3

B Li,Y Xie,JX Huang,YT Qian

DOI: https://doi.org/10.1006/jssc.2000.8772

IF: 3.3

2000-01-01

Journal of Solid State Chemistry

Abstract:The preparation of nanocrystalline Cu2SnS3 at synthetic conditions of low temperature (<180°C) was first reported. Nanocrystalline Cu2SnS3 was directly synthesized from the reaction of CuCl2·2H2O with elemental tin and sulfur through a solvothermal process in ethylenediamine at 140–180°C for 15 h. X-ray diffraction (XRD) patterns, transmission electron microscope (TEM) images, and X-ray photoelectron spectra (XPS) were used to characterize the products. The mechanism of the formation of the Cu2SnS3 nanocrystals in the solvothermal process was proposed. The UV–vis absorption spectroscopy and the electric conductivity of products were also studied.
Efficient Thermolysis Route To Monodisperse Cu2znsns4 Nanocrystals With Controlled Shape And Structure

Xiaoyan Zhang,Guobiao Guo,Cheng Ji,Kai Huang,Chenyang Zha,Yifeng Wang,Liming Shen,Arunava Gupta,Ningzhong Bao

DOI: https://doi.org/10.1038/srep05086

IF: 4.6

2014-01-01

Scientific Reports

Abstract:Monodisperse Cu2ZnSnS4 (CZTS) nanocrystals with tunable shape, crystalline phase, and composition are synthesized by efficient thermolysis of a single source precursor of mixed metal-oleate complexes in hot organic solvents with dissolved sulfur sources. Suitable tuning of the synthetic conditions and the Cu/(Zn + Sn) ratio of the precursor has enabled precise control of the crystalline phase in the form of kesterite, or a newly observed wurtzite structure. Nanocrystals with morphology in the form of spherical, rice-like, or rod-like shapes are obtained over a wide range of compositions (0.5 <= Cu/(Zn + Sn) <= 1.2). Both the final products and intermediates for each shape exhibit consistent composition and structure, indicating homogenous nucleation and growth of single-phase nanocrystals. Thin films prepared from colloidal nanocrystal suspensions display interesting shape-dependent photoresponse behavior under white light illumination from a solar simulator.
Two‐Dimensional CuSe Nanosheets with Microscale Lateral Size: Synthesis and Template‐Assisted Phase Transformation

Xue-Jun Wu,Xiao Huang,Juqing Liu,Hai Li,Jian Yang,Bing Li,Wei Huang,Hua Zhang

DOI: https://doi.org/10.1002/anie.201311309

2014-01-01

Angewandte Chemie

Abstract:AbstractSemiconducting nanosheets with microscale lateral size are attractive building blocks for the fabrication of electronic and optoelectronic devices. The phase‐controlled chemical synthesis of semiconducting nanosheets is of particular interest, because their intriguing properties are not only related to their size and shape, but also phase‐dependent. Herein, a facile method for the synthesis of phase‐pure, microsized, two‐dimensional (2D) CuSe nanosheets with an average thickness of approximately 5 nm is demonstrated. These hexagonal‐phased CuSe nanosheets were transformed into cubic‐phased Cu2−xSe nanosheets with the same morphology simply by treatment with heat in the presence of CuI cations. The phase transformation, proposed to be a template‐assisted process, can be extended to other systems, such as CuS and Cu1.97S nanoplates. Our study offers a new method for the phase‐controlled preparation of 2D nanomaterials, which are not readily accessible by conventional wet‐chemical methods.

Simple One-Pot Synthesis of Cu4SnS4 Nanoplates and Temperature-Induced Phase Transformation Mechanism

Simple one-pot synthesis of Cu<sub>4</sub>SnS<sub>4</sub> nanoplates and temperature-induced phase transformation mechanism

In Situ Synthesis of Metal Sulfide Nanoparticles Based on 2D Metal-Organic Framework Nanosheets.

Facile synthesis of CuSe nanoparticles and high-quality single-crystal two-dimensional hexagonal nanoplatelets with tunable near-infrared optical absorption

Facile synthesis and characterization of CuInS2 nanocrystals with different structures and shapes

Large-Scale Synthesis and Self-Assembly of Monodisperse Hexagon Cu2S Nanoplates

Phase-Selective Synthesis and Self-Assembly of Monodisperse Copper Sulfide Nanocrystals

Inorganic Sn-X-Complex-Induced 1d, 2d, and 3d Copper Sulfide Superstructures from Anisotropic Hexagonal Nanoplate Building Blocks

Facile Synthesis of Monodisperse Cu3SbSe4 Nanoparticles and Thermoelectric Performance of Cu3SbSe4 Nanoparticle-Based Materials

Insight into the Crystal Phase and Shape Evolution from Monoclinic Cu1.94S to Wurtzite Cu2ZnSnS4 Nanocrystals

Synthesis of hexagonal structured wurtzite and chalcopyrite CuInS 2 via a simple solution route

Large-scale synthesis of single-crystalline CuO nanoplatelets by a hydrothermal process

Controllable Transformation from Rhombohedral Cu1.8S Nanocrystals to Hexagonal CuS Clusters: Phase- and Composition-Dependent Plasmonic Properties

General Solution Route for Nanoplates of Hexagonal Oxide or Hydroxide

One-Pot Synthesis of BiCuSO Nanosheets under Ambient Atmosphere As Broadband Spectrum Photocatalyst

Facile hydrothermal synthesis of hydrotropic Cu2ZnSnS 4 nanocrystal quantum dots: Band-gap engineering and phonon confinement effect

One-Pot Synthesis and Optical Property of Copper(I) Sulfide Nanodisks

Columnar self-assembly of Cu2S hexagonal nanoplates induced by tin(IV)-X complex as inorganic surface ligand.

Synthesis, Characterization, and Properties of Nanocrystalline Cu2sns3

Efficient Thermolysis Route To Monodisperse Cu2znsns4 Nanocrystals With Controlled Shape And Structure

Two‐Dimensional CuSe Nanosheets with Microscale Lateral Size: Synthesis and Template‐Assisted Phase Transformation