Abstract:Harvesting energy from ambient moisture and natural water sources is currently of great interest due to the need for standalone self-powered nano/micro-systems. In this work, we report on the development of a cost-effective nanogenerator based on a carbon paper-Al2O3 nanoparticle layer-carbon paper (CAC) sandwich structure, where the 3D Al2O3 layer is deposited via vacuum filtration. This type of device can produce an open-circuit voltage (UOC) of up to 4 V and a short-circuit current (ISC) of ∼18 μA with only an 8 μL water droplet applied. To our knowledge, this is the highest voltage yet reported from a single moisture/water-induced electricity nanogenerator using solid oxides and carbon-based materials. A remarkable output power of 14.8 μW can be reached with an optimized resistive load. An LED with a working voltage of 3–3.2 V can operate for a short time with the power from a single CAC device exposed to one 8 μL water droplet. Furthermore, a CAC generator adsorbing as little as 2 μL water droplets every 3 min can also give a UOC of 3.63 V. We show that CAC devices provide a robust electrical output over more than 200 wet–dry cycles without any deterioration in performance. These units demonstrate much promise as cost-effective electricity generators for harvesting energy from natural sources like rainwater, tap water, snow runoff, and dew. The response time of CAC devices can be as fast as 10–100 ms, making them ideal for applications as self-powered water detectors. The generation of power in this device arises from the streaming current. To assist in the optimization of these devices, we have analyzed how their response is related to such factors as layer thickness, time interval between application of water droplets, and the volume of each water droplet.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c04290?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c04290</a>.Photo of the as-fabricated CAC device; relationship between the average layer thickness and weight of Al2O3 NPs; characterizations of Al2O3 NPs and the carbon electrode; UOC and ISC responses of devices with different Al2O3 layer thicknesses, time intervals between water droplets, and different water volumes of each water droplet; time dependence of the voltage response of the CAC nanogenerators with different thicknesses obtained using a fast oscilloscope; time dependence of the output voltage when powering an LED; UOC response when the Al2O3 layer was replaced with a filter paper and print paper and when deionized water was replaced by ethanol, acetone, or isopropanol; schematic of the overlapping EDL between two adjacent Al2O3 NPs; schematic of the water diffusion in an Al2O3 layer at various layer thicknesses and water volumes and the corresponding verification from a 1.27 mm-thick CAC generator; and schematic of the mechanism for water diffusion in an Al2O3 layer for different time intervals between applied water droplets (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c04290/suppl_file/am1c04290_si_001.pdf">PDF</a>)Illustration of powering a commercial LED light with one single device when an 8 μL water droplet is applied (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c04290/suppl_file/am1c04290_si_002.mov">MOV</a>)This article has not yet been cited by other publications.

Surface Charge Density-Dependent Performance of Ni–Al Layered Double Hydroxide-Based Flexible Self-Powered Generators Driven by Natural Water Evaporation

Asymmetrical Electrode Modified by Metal Oxide Nanoparticles for Power Generation Devices from Water Evaporation

Patterned Coating of Ionic Diode Arrays Toward Flexible Moist‐Electric Generators to Power Wireless Sensor Nodes

A Simple High Power, Fast Response Streaming Potential/Current-Based Electric Nanogenerator Using a Layer of Al 2 O 3 Nanoparticles

Evaporation Driven Hydrovoltaic Generator Based on Nano-Alumina-Coated Polyethylene Terephthalate Film

Hydrovoltaic electricity generator using a hierarchical NiFe LDH-coated CuO nanowire mesh device

Freestanding silicon nanowires mesh for efficient electricity generation from evaporation-induced water capillary flow

A Simple High Power, Fast Response Streaming Potential/Current-Based Electric Nanogenerator Using a Layer of Al2O3 Nanoparticles.

Ultrasound-seeded Vapor-Phase-transport Growth of Boundary-Rich Layered Double Hydroxide Nanosheet Arrays for Highly Efficient Water Splitting

Enhanced Output Performance of Nanogenerator Based on Composite of Poly Vinyl Fluoride (PVDF) and Zn:Al Layered-Double Hydroxides (LDHs) Nanosheets

High‐Performance Dielectric Elastomer Nanogenerator for Efficient Energy Harvesting and Sensing via Alternative Current Method

Harvesting Water Wave Energy by Asymmetric Screening of Electrostatic Charges on A Nanostructured Hydrophobic Thin-Film Surface

Hydrophilic 1T-WS2 Nanosheet Arrays toward Conductive Textiles for High-Efficient and Continuous Hydroelectric Generation and Storage

Electrowetting‐Assisted Generation of Ultrastable High Charge Densities in Composite Silicon Oxide–Fluoropolymer Electret Samples for Electric Nanogenerators

Harvesting Water‐Evaporation‐Induced Electricity Based on Liquid–Solid Triboelectric Nanogenerator

Multifunctional Power Generators Beyond Moisture Limitation

Boosting Charge Transfer Via Interface Charge Reconstruction Between Amorphous NiFe-LDH and Crystalline NiCo2O4 for Efficient Alkaline Water/seawater Oxidation

A hollow tubular NiCo layacknered double hydroxide@Ag nanowire structure for high-power-density flexible aqueous Ni//Zn battery

Enhancing energy extraction from water microdroplets through synergistic electrokinetic and galvanic effects

Bilayer of polyelectrolyte films for spontaneous power generation in air up to an integrated 1,000 V output

Boosting charge transfer via interface charge reconstruction between amorphous NiFe-LDH and crystalline NiCo 2 O 4 for efficient alkaline water/seawater oxidation