Abstract:In the electromagnetic levitation experiment, the liquid flow in the undercooled liquid alloy remarkably affects the relevant thermodynamic property measurement and solidification microstructure. Therefore, it is of great importance to understand the fluid convection inside the undercooled melt. Theoretical calculation and electromagnetic levitation experiment have been used to investigate the internal velocity distribution and rapid solidification mechanism of Fe50Cu50 alloy. Based on axisymmetric electromagnetic levitation model, the distribution patterns of magnetic flux density and inducted current for levitated Fe50Cu50 alloy are calculated together with the mean Lorenz force. The Navier-Stokes equations are further taken into account in order to clarify the internal fluid flow. The results of the theoretical calculation reveal that the fluid velocity within levitated melt is strongly dependent on three factors, i.e., current density, current frequency and melt undercooling. As one of these factors increases, the maximum fluid velocity decreases while the average fluid velocity increases. Meanwhile, the area with fluid velocity larger than 100 mm·-1 is significantly extended. Furthermore, the fluid flow within levitated melt displays an annular tubular distribution characteristic. The Fe50Cu50 alloy melt is undercooled and solidified under electromagnetic levitation condition. In this undercooling regime △ T50Cu50 alloy melt has suppressed phase separation substantially. Once the undercooling attains a value of 150 K, metastable phase separation leads to the formation of layered pattern structure consisting of floating Fe-rich zone and sinking Cu-rich zone. A core-shell macrosegregation morphology with the Cu-rich zone distributed in the center and outside of the sample and Fe-rich zone in the middle occurs if the undercooling increases to 204 K. With the enhancement of undercooling after phase separation, the grain size of α -Fe dendrites in Cu-rich zone presents a decreasing trend. In contrast to the phase separated morphology of Fe50Cu50 alloy under the glass fluxing condition, the phase separated morphologies show obviously different characteristics. In such a case, the forced convection induced by electromagnetic stirring results in the formation of wavy interface between Fe-rich and Cu-rich zones, the distorted morphology of the Cu-rich spheres distributed in the Fe-rich zone, and the increased appearance probabilities of Cu-rich spheres at the upper part of electromagnetically levitated sample. Experimental observations demonstrate that the distribution pattern of Cu-rich spheres in Fe-rich zone is influenced by the tubular fluid flow inside the melt.

Migration Dynamics for Liquid/solid Interface During Levitation Melting of Metallic Materials

A CFD Study Assisted with Experimental Confirmation for Liquid Shape Control of Electromagnetically Levitated Bulk Materials

Fluid Convection and Solidification Mechanisms of Liquid Fe50cu50 Alloy under Electromagnetic Levitation Condition

Liquid phase separation in undercooled Co–Cu alloys processed by electromagnetic levitation and differential thermal analysis

Dynamics of Solidification and Development of Morphology of Cu-Base Alloys with A Metastable Miscibility Gap in the Range of the Undercooled Melt

Determining Thermophysical Properties of Normal and Metastable Liquid Zr-Fe Alloys by Electrostatic Levitation Method

An In-Situ Diagnostic Study of Electromagnetic Stirring Effects on Peritectic Solidification Kinetics for Containerlessly Processed Liquid Fe-Ti Alloys

Metastable Phase Separation and Crystalline Orientation Feature of Electromagnetic Levitation Processed CoCrCuFeNi High Entropy Alloy

Liquid State Property, Structural Evolution and Mechanical Behavior of TiFe Alloy Solidified under Electrostatic Levitation Condition

A Videographic and Numerical Study of Nonisothermal Oscillation Process for Electrostatically Levitated Liquid Nb–Si Alloy

Numerical Analysis and Experimental Verification for Heat Transfer Process of Electrostatically Levitated Alloy Droplets

Electromagnetic levitation containerless processing of metallic materials in microgravity: thermophysical properties

In-situ Observation of S/L Interface Migration and Mechanical Property Increase of Inconel 600 Alloy Prepared by Electromagnetic Levitation

Numerical Simulation of Electromagnetic-Thermal-Fluid Coupling for the Deformation Behavior of Titanium-Aluminum Alloy under Electromagnetic Levitation

Titanium Droplet Formation in Electromagnetic Levitation Melting Process

Determining thermophysical properties of undercooled liquid Ti-Al alloy by electromagnetic levitation

Liquid dripping dynamics and levitation stability control of molten Ti–Al–Nb alloy within electromagnetic fields

Modeling and Characterization of Surface Deformation and Current Distribution of Molten Droplets under Electromagnetic Levitation

Dimensionless Analysis and Mathematical Modeling of Electromagnetic Levitation (EML) of Metals

Optimized Electromagnetic Fields Levitate Bulk Metallic Materials

Applications of Electromagnetic Levitation and Development of Mathematical Models: A Review of the Last 15 Years (2000 to 2015)