Abstract:Liquid phase separation and microstructure evolution mechanisms of immiscible Fe50Sn50 alloy droplets placed on a chilling surface have been investigated by both arc melting experiments and lattice-Boltzmann simulations. The pattern selection of phase-separated morphologies strongly depended on the sample diameter. With the reduction in sample size, phase separation time was shortened, two-layer macrosegregation morphologies first transformed into intermediate phase-separated morphologies and finally changed into a homogeneously dispersed microstructure. The farther away from the sample bottom the longer the phase separation time and the larger the Sn-rich phase. A heat transfer equation was proposed to analyze the temperature field characteristics of Fe50Sn50 alloy droplets placed on the surface of a water-cooled copper mold. Theoretical analyses revealed that the sample gradually cooled from the bottom to the top of the sample. There existed a relatively high temperature gradient of several hundred Kelvins per millimeter between the top and the bottom of the arc melted sample, which induced the occurrence of an extremely intense Marangoni convection. The smaller the sample size the larger the temperature gradient and the greater deviation-degree of Fe-rich zone in two-layer macrosegregation structure from the bottom of the sample. The simulated two-layer phase-separated morphology agreed well with the experimental observations. Numerical simulations demonstrated that the effect of Marangoni convection on the phase separation was significantly stronger than the Stokes motion, and Fe-rich globules with a larger density tended to move upward to form a Fe-rich zone deviating from the bottom of the sample.

Liquid phase separation in undercooled Co–Cu alloys processed by electromagnetic levitation and differential thermal analysis

Liquid Phase Separation and Solidification of Cu40Co3oCr30 Alloy under Different Cooling Conditions

Liquid-phase Separation in Rapid Solidification of Undercooled Fe-Co-Cu Melts

Supercooling, Isothermal Soaking and Liquid Phase Separation of Cu–Co Alloys

Liquid separation behavior of Cu-Co alloy during isothermal process at high temperature

Influence of high magnetic field on the liquid-liquid phase separation behavior of an undercooled Cu–Co immiscible alloy

Rapid Solidification of Cu60Co30Cr10 Alloy under Different Conditions

A comparative study of metastable phase separation for undercooled liquid Fe35Cu65 alloy under natural and forced cooling conditions

Characterisation of Phase Separation in Drop-Tube-Processed Rapidly Solidified CoCrCuFeNi0.8 High-Entropy Alloy

Thermodynamic description of metastable fcc/liquid phase equilibria and solidification kinetics in Al-Cu alloys

Metastable Phase Diagrams of Cu-based Alloy Systems with a Miscibility Gap in Undercooled State

Observations and simulations for phase separation process of immiscible Fe50Sn50 alloy droplets placed on a chilling surface

Properties and microstructural evolution of a ternary Cu–Co–Fe immiscible alloy solidified under high magnetic fields

Non-equilibrium solidification of bulk undercooled Ni–P eutectic alloys

Effect of Minor Addition of Co on Nonequilibrium Solidification of Deeply Undercooled Cu Based Alloys

Phase separation of a supersaturated nanocrystalline Cu Co alloy and its influence on thermal stability

Dynamics and microstructural evolution of bulk amorphous Cu 12.5 Ni 10 Zr 41 Ti 14 Be 22.5 during phase separations: a small-angle neutron scattering approach

Dynamics and microstructural evolution of bulk amorphous Cu<sub>12.5</sub>Ni<sub>10</sub>Zr<sub>41</sub>Ti<sub>14</sub>Be<sub>22.5</sub> during phase separations: a small-angle neutron scattering approach

Depressing Liquid Phase Separation and Macrosegeregation of Fe–Sn Immiscible Alloys by Cu Alloying

Effects of cooling rate on the microstructure control and liquid–liquid phase separation behavior of Cu–Fe–P immiscible alloys

Liquid State Dependent Solidification of a Co-B Eutectic Alloy under a High Magnetic Field