Abstract:The application of titanium (Ti) based biomedical materials which are widely used at present, such as commercially pure titanium (CP-Ti) and Ti–6Al–4V, are limited by the mismatch of Young's modulus between the implant and the bones, the high costs of products, and the difficulty of producing complex shapes of materials by conventional methods. Niobium (Nb) is a non-toxic element with strong β stabilizing effect in Ti alloys, which makes Ti–Nb based alloys attractive for implant application. Metal injection molding (MIM) is a cost-efficient near-net shape process. Thus, it attracts growing interest for the processing of Ti and Ti alloys as biomaterial. In this investigation, metal injection molding was applied to the fabrication of a series of Ti–Nb binary alloys with niobium content ranging from 10wt% to 22wt%, and CP-Ti for comparison. Specimens were characterized by melt extraction, optical microscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and transmission electron microscopy (TEM). Titanium carbide formation was observed in all the as-sintered Ti–Nb binary alloys but not in the as-sintered CP-Ti. Selected area electron diffraction (SAED) patterns revealed that the carbides are Ti2C. It was found that with increasing niobium content from 0% to 22%, the porosity increased from about 1.6% to 5.8%, and the carbide area fraction increased from 0% to about 1.8% in the as-sintered samples. The effects of niobium content, porosity and titanium carbides on mechanical properties have been discussed. The as-sintered Ti–Nb specimens exhibited an excellent combination of high tensile strength and low Young's modulus, but relatively low ductility.

Microstructure and Mechanical Properties of Bimodal Ti-Bi Alloys Fabricated by Mechanical Alloying and Spark Plasma Sintering for Biomedical Applications

Microstructure and Mechanical Properties of Ti-Zr-Cr Biomedical Alloys.

Microstructure and Mechanical Properties of A Newly Developed Low Young'S Modulus Ti-15zr-5cr-2al Biomedical Alloy

Microstructure and Mechanical Property of Biomedical Ultrafine-grained beta-type Ti28Nb2Zr8Sn Bulk Alloys Fabricated by Power Metallurgy

Characteristics of Ti-Nb-Mg alloy by powder metallurgy for biomedical applications

Design of Bimorphic-Bimodal Microstructure in Titanium Alloys by Semi-Solid Sintering

Effects of Alloying Elements and Annealing Treatment on the Microstructure and Mechanical Properties of Nb-Ta-Ti Alloys Fabricated by Partial Diffusion for Biomedical Applications

Microstructure, Mechanical Behavior and Biocompatibility of Powder Metallurgy Nb-Ti-Ta Alloys As Biomedical Material.

Powder Metallurgical Low-Modulus Ti-Mg Alloys for Biomedical Applications

Microstructure and Corrosion Resistance of Powder Metallurgical Ti-Nb-Zr-Mg Alloys with Low Modulus for Biomedical Application

Fabrication of Biomedical Ti–35Nb–7Zr–5Ta Alloys by Mechanical Alloying and Spark Plasma Sintering

Microstructure and Mechanical Behavior of Metal Injection Molded Ti–Nb Binary Alloys As Biomedical Material

Excellent Synergies of Mechanical Properties and Biological Performance of Additively-Manufactured Ti Cu Alloy

Microstructure, Mechanical Properties, Castability and in Vitro Biocompatibility of Ti-Bi Alloys Developed for Dental Applications.

Microstructure and Mechanical Properties of Biomedical Ti-Zr-Nb-Ta-Sn High-Entropy Alloys

The Microstructure and Properties of Ti–Mo–Nb Alloys for Biomedical Application

Influence of Mechanical Alloying and Sintering Temperature on the Microstructure and Mechanical Properties of a Ti-22Al-25Nb Alloy

Bimodal Eutectic Titanium Alloys: Microstructure Evolution, Mechanical Behavior and Strengthening Mechanism

Microstructure Characterization and Property Tailoring of a Biomedical Ti–19Nb–1.5Mo–4Zr–8Sn Alloy

Microstructures and Mechanical Properties of Metastable Β Type TiNbZrFe Alloys for Biomedical Application

A Β-Type TiNbZr Alloy with Low Modulus and High Strength for Biomedical Applications