Abstract:Specific capacity, HER, OER, and Overall Water Splitting of Mn0.2Ni0.8Co2O4 electrode and their FE‐SEM images, respectively. Summary Synthesizing triple transition metal oxide (TTMO) is an extraordinary strategy to develop electrodes for efficient energy storage and conversion devices, owing to their unique nanostructure with high porosity and specific surface area. The cobalt‐based mixed‐valence oxides have attracted great attention due to their facile synthesis, low cost, and excellent electrochemical performance. However, less attention is paid to investigating the effect of different substitutions on the physico‐chemical properties of TTMO. In this study, nanoparticles (NPs) decorated ultrathin Ni1‐xMnxCo2O4 nanoflakes (NPs@NFs) are synthesized by tuning the molar ratio between Mn and Ni via facile deep eutectic solvents (DESs) method. Unique and highly porous NPs@NFs nanostructures aid to increase the overall surface area of the materials, whereas Mn, Ni, and Co ions participate in their redox‐active capacity, improving the electrochemical activity of the material. This Ni0.8Mn0.2Co2O4 hybrid nanostructure exhibited excellent supercapacitive performance with a high specific capacity (Cs) of 761 mAh g−1 at a higher current density of 30 mA cm−2 and superior cycling retention of 92.86% after 10 000 cycles. Further, a hybrid asymmetric supercapacitor (Ni0.8Mn0.2Co2O4//AC) device exhibited an extended potential window of 1.5 V, which results in an ultrahigh energy density of 66.2 W kg−1 by sustaining a power density of 1519 Wh kg−1. The electrocatalytic activity of the optimized Ni0.8Mn0.2Co2O4 shows the outstanding performance toward hydrogen evolution reaction (HER) (150 mV/ 161 mV dec−1) and oxygen evolution reaction (OER) (123 mV/47 mV dec−1) with a lower voltage of 1.51 V (@10 mA cm−2) for overall water splitting, with outstanding stability up to 25 hours. These results indicate that chemically synthesized ultrathin NPs@NFs‐like nanostructure is a capable electrode for multiple applications, such as supercapacitors, and overall water splitting. Highlights Facial synthesis of nanoflakes of Ni1‐XMnXCo2O4 thin films by a DES method. Fully decorated NPs on the interconnected NFs provided a higher surface area. Nanostructures with a maximum specific capacity of 761 mAh g−1 at 30 mA cm−2, with excellent stability of 92.86%. The solid‐state device shows an excellent energy density of 66.2 Wh kg−1 at a power density of 1519 W kg−1. The assembled Ni0.8Mn0.2Co2O4 /Ni‐based water splitting exhibited low voltage (1.51 V) and superb stability up to 25 hours.

Low electronegativity Mn bulk doping intensifies charge storage of Ni<sub>2</sub>P redox shuttle for membrane-free water electrolysis

An Ultra-High Mass-Loading Transition Metal Phosphide Electrocatalyst for Efficient Water Splitting and Ultra-Durable Zinc-Air Batteries

Heterostructured Ni2P/NiMo-layered Double Hydroxide Nanoarrays with Enriched Redox Active Sites for Supercapacitors

Trimetallic synergistic optimization of 0D NiCoFe-P QDs anchoring on 2D porous carbon for efficient electrocatalysis and high-energy supercapacitor

Self-Supported Bimetallic Phosphide Heterojunction-Integrated Electrode Promoting High-Performance Alkaline Anion-Exchange Membrane Water Electrolysis

Synergistic effect of Mn doping and hollow structure boosting Mn-CoP/Co2P nanotubes as efficient bifunctional electrocatalyst for overall water splitting

Electron and surface engineering of Ni 2 P/MnP 4 heterojunction as high performance bifunctional electrocatalyst for amperage-level overall water splitting

Composition-optimized manganese phosphide nanoparticles anchored on porous carbon network for efficiently electrocatalytic hydrogen evolution

Interfacial Electronic Redistribution via Anionic Modulator for Superb and Highly Stable Water/Seawater Oxidation

Delocalizing the d-electrons spin states of Mn site in MnO2 for anion-intercalation energy storage

Electrochemical Mechanism Analysis of Dual-Site Doped on P2-Na 2/3 Ni 1/3 Mn 2/3 O 2 Enabling Anionic and Cationic Redox with Excellent Electrochemical Performance

Bifunctional nanoparticles decorated Ni1‐xMnxCo2O4 ultrathin nanoflakes‐like electrodes for supercapacitor and overall water splitting

NiFe-layered double hydroxide/CoP2@MnP heterostructures of clustered flower nanowires on MXene-modified nickel foam for overall water-splitting

Decorated nickel phosphide nanoparticles with nitrogen and phosphorus co-doped porous carbon for enhanced electrochemical water splitting

Electronic Structure Regulation by Fe Doped Ni-Phosphides for Long-term Overall Water Splitting at Large Current Density

Progress in the development of heteroatom-doped nickel phosphates for electrocatalytic water splitting

Three-in-one strategy for boosted charge transport in Ag/Co-Ni(OH) 2 @nickel foam capacitive electrodes toward membrane-free electrocatalytic H 2 production

Fe2P Nanoparticles Embedded on Ni2P Nanosheets As Highly Efficient and Stable Bifunctional Electrocatalysts for Water Splitting

Bimetal synergistically regulates Ni and P oxidation states for efficient oxygen evolution reaction

One-step sonochemical synthesis of NiMn-LDH for supercapacitors and overall water splitting

Mn doped hierarchical water splitting electrocatalyst: Synthesis, surface analysis and application to AEMWE