Abstract:The Cu-based shape memory alloy (SMA) with highly oriented columnar crystals is an ideal candidate for the commercial application, especially the ones obtained through rapid cooling via additive manufacturing method. In this work, Cu71Al18Mn11 (at%) shape memory alloy with strong <001> texture columnar grains was successfully prepared by selective laser melting (SLM). An L27(313) orthogonal array was designed to systematically investigate the effects of laser power, scanning speed, scanning spacing, layer thickness and their interactions on the forming quality of Cu71Al18Mn11 alloys. Cu71Al18Mn11 alloys with density of 7.3204 g·cm−3 and relative density of 99.18% were successfully prepared when the laser power, scanning speed, scanning distance and layer thickness were 240 W, 1000 mm·s−1, 0.11 mm and 25 µm, the transformation onset temperature (Ms), martensite phase transformation termination temperature (Mf), austenite phase transformation onset temperature (As) and austenite phase transformation termination temperature (Af) are −21.84, −26.04, −15.75 and −12.36 °C, respectively. The compression strength and fracture strain along the building direction (BD) were significantly superior to the scanning direction (SD), while the superelasticity of compression along the SD reached 2.50%, which was better than that of 2.32% along BD. The mechanical property and superelasticity anisotropy due to the formation of columnar grains and texture were discussed. This study shows that SLM is a proposed method for the preparation of Cu-Al-Mn SMAs with high superelasticity, which provides a new strategy for enhancing the shape memory alloy superelasticity.Graphical Abstract

Study on CuZnAl Memory Alloy Fbricated by Selective Laser Melting

Effect of element evaporation on the microstructure and properties of CuZnAl shape memory alloys prepared by selective laser melting

4D Forming Shape Memory Component of Cu–13Al–5Fe Alloy Based on Laser Powder Bed Fusion of Metal Powders

Microstructure and Mechanical Properties of Selective Laser Melted Mg-9 Wt%al Powder Mixture

Selective Laser Melting of Al-Cu-Mn-Mg Alloys: Processing and Mechanical Properties

Achieving dual-phase structured Cu-Al-Mn-Si alloy with prominent shape memory properties via laser powder bed fusion

The mechanical and functional behaviors of Mn–15 wt.%Cu alloy produced by selective laser melting

Effect of Volume Energy Density on Selective Laser Melting Niti Shape Memory Alloys: Microstructural Evolution, Mechanical and Functional Properties

Selective laser melting of Cu–Cr–Zr copper alloy: Parameter optimization, microstructure and mechanical properties

Effect of laser energy density on the phase transformation behavior and functional properties of NiTi shape memory alloy by selective laser melting

Effect of Energy Density on Formability, Microstructure and Micro-Hardness of Selective Laser Melted Sc- and Zr- Modified 7075 Aluminum Alloy

Additive manufacturing of Cu-Al-Mn shape memory alloy with enhanced superelasticity

Influence of Heat Treatment on Microstructures and Shape Memory Effect of Cu-28Zn-2.5Al wt. % Produced by Gravity Casting

The Effects of Heat Treatment on the Microstructure and Mechanical Properties of a Selective Laser Melted AlCoFeNi Medium-Entropy Alloy

Tensile property and microstructure of Al−4.77Mn−1.37Mg−0.67Sc−0.25Zr alloy under different selective laser melting processing parameters

A Study on Sc- and Zr-modified Al–Mg Alloys Processed by Selective Laser Melting

Microstructure and mechanical properties of AlCoCrFeMnNi HEAs fabricated by selective laser melting

Effect of Cooling Rate on Microstructure, Shape Memory Effect and Mechanical Properties of Cu–13Al–5Fe High-Temperature Shape Memory Alloy Fabricated by Laser Powder Bed Fusion

Effect of Al content on thermal stability, shape memory effect and mechanical properties of Cu–Al–Fe shape memory alloys

A Study of the Microstructure and Mechanical and Electrochemical Properties of CoCrFeNi High-Entropy Alloys Additive-Manufactured Using Laser Metal Deposition

Microstructure and Mechanical Properties of a Novel Sc and Zr Modified 7075 Aluminum Alloy Prepared by Selective Laser Melting