Novel application of g-C3N4/NaNbO3 composite for photocatalytic selective oxidation of biomass-derived HMF to FFCA under visible light irradiation

Yekun Zhu,Yun Zhang,Lili Cheng,Mohammed Ismael,Zhiyuan Feng,Ying Wu

DOI: https://doi.org/10.1016/j.apt.2019.12.040

IF: 4.969

2020-01-01

Advanced Powder Technology

Abstract:FFCA was achieved in high selectivity by photocatalytic oxidation of HMF over g-C3N4/NaNbO3 under visible light.

What problem does this paper attempt to address?

Photocatalytic Selective Oxidation of HMF to DFF over Bi2WO6/mpg–C3N4 Composite under Visible Light

Lili Cheng,Danyao Huang,Yun Zhang,Ying Wu

DOI: https://doi.org/10.1002/aoc.6404

IF: 3.9

2021-01-01

Applied Organometallic Chemistry

Abstract:Bi2WO6/mpg–C3N4 composite catalyst was prepared by hydrothermal method and applied in the partial oxidation of HMF to DFF by photocatalytic approach. The 12% Bi2WO6/mpg–C3N4 composite exhibits the highest catalytic performance, with the HMF conversion of 59.3% and the DFF selectivity of 84.3% after 6 h. This may be primarily ascribed to the synergetic effect of Bi2WO6 and mpg–C3N4 on photogenerated charges separation through the charge transfer between the two semiconductors. Based on the reactive species trapping experiment, it is concluded that ·O2− plays a significant part to convert HMF into DFF and the electron–hole separation follows a Z‐scheme mechanism.
Bimetal-modified G-C3n4 Photocatalyst for Promoting Hydrogen Production Coupled with Selective Oxidation of Biomass Derivative

Qing Yang,Ting Wang,Fang Han,Ziqiang Zheng,Bing Xing,Benxia Li

DOI: https://doi.org/10.1016/j.jallcom.2021.163177

IF: 6.2

2022-01-01

Journal of Alloys and Compounds

Abstract:The solar-driven coproduction of hydrogen (H-2) fuel and value-added chemicals from biomass derivatives represents a promising strategy to address the energy and environment issues. Herein, the Ni-Au bimetal modified g-C3N4 photocatalyst was synthesized by a step-by-step photodeposition method and used to promote the photocatalytic coproduction of H-2 and furfural from furfural-alcohol aqueous solution. In the designed Ni Au/g-C3N4 photocatalyst, g-C3N4 was the main light-harvesting material for generating electron-hole pairs which were separated efficiently by metal/g-C3N4 interface, plasmonic Au nanoparticles further increased the light utilization efficiency, and Ni acted as both electron trap and the active sites for H-2 evolution. Beneficial from the synergy of three components, the Ni-Au/g-C3N4 photocatalyst exhibited 3-folds activity of Au/CN sample toward photocatalytic coproduction of H-2 and furfural. Both photoluminescence spectroscopy and photoelectrochemical measurements demonstrated the more efficient separation and transfer of photogenerated charge carriers in Ni-Au/g-C3N4 photocatalyst. In situ electron spin resonance revealed the generations of hydroxyl radical and carbon center radical in the photocatalytic reaction. Based on the systematic characterizations, a photocatalytic mechanism was proposed and discussed. This work provides a rational construction of photocatalysts for coproduction of H-2 and value-added chemicals from biomass derivatives as well as explores the synergistic effect of bimetallic cocatalyst on enhancing the photocatalysis. (C) 2021 Elsevier B.V. All rights reserved.
Photocatalytic selective oxidation of biomass-derived 5-hydroxymethylfurfural to 2,5-diformylfuran on metal-free g-C3N4 under visible light irradiation

Qi Wu,Yiming He,Huili Zhang,Zhiyuan Feng,Ying Wu,Tinghua Wu

DOI: https://doi.org/10.1016/j.mcat.2017.04.012

IF: 4.6

2017-01-01

Molecular Catalysis

Abstract:DFF was achieved in high selectivity by photocatalytic oxidation of HMF over g-C3N4 under visible light.
Photocatalytic Selective Oxidation of HMF Coupled with H 2 Evolution on Flexible Ultrathin g-C 3 N 4 Nanosheets with Enhanced N–H Interaction

Xiaolei Bao,Mu Liu,Zeyan Wang,Dujuan Dai,Peng Wang,Hefeng Cheng,Yuanyuan Liu,Zhaoke Zheng,Ying Dai,Baibiao Huang

DOI: https://doi.org/10.1021/acscatal.1c05357

IF: 12.9

2022-01-20

ACS Catalysis

Abstract:Solar-driven catalytic oxidation of 5-hydroxymethylfurfural (HMF) into 2,5-diformylfuran (DFF) coupled with H2 evolution has been considered a promising approach. The exploration of an active and stable photocatalyst still remains challenging work. Herein, we found that the flexible ultrathin graphitic carbon nitride (UCNT) could be an ideal candidate. The UCNT exhibits photocatalytic performance in selective oxidation of HMF into DFF coupled with H2 evolution with activities of 95.0 and 92.0 μmol g–1 h–1 under visible light irradiation. Importantly, the UCNT also demonstrates high DFF selectivity (95%) and good cycling stability. The activity may be ascribed to the strong specific interaction between HMF and UCNT. Solid-state nuclear magnetic resonance (NMR) and density functional theory (DFT) results reveal that the twisted structure of HMF molecules could form a strong interaction between HMF and UCNT, reducing the dehydrogenation energy barrier for HMF oxidation. In addition, mechanistic studies reveal that •C6H4O3 is the key radical intermediate during the HMF oxidation process by a in situ electron spin resonance (ESR) trapping test. Our work clarifies the interaction of complex biomass molecules on the flexible catalyst surface and provides views on the further development of heterogeneous catalytic biomass conversion.

chemistry, physical
Solar-light-driven photocatalytic selective oxidation of biomass-derived 5-hydroxymethylfurfural to 2,5-diformylfuran over 2D g-C 3 N 4 /BiOCl heterostructures photocatalyst

Xian-De Zhou,Yong-Hui Tian

DOI: https://doi.org/10.1016/j.jphotochem.2024.115728

IF: 5.141

2024-05-04

Journal of Photochemistry and Photobiology A Chemistry

Abstract:Biomass is a natural and renewable carbon resource. One of the possible green approaches to "carbon neutrality" is catalytic conversion of biomass resources into high value-added chemicals. As a result, photocatalytic selective oxidation of the biomass product 5-hydroxymethylfurfural (5-HMF) to 2,5-dicarbonylfuran (DFF) is an ecologically benign and energy efficient method. In this study, 2D g-C 3 N 4 /BiOCl heterostructures composites were prepared by easy ultrasonication-assisted stirring method for the first application of photocatalytic oxidation of 5-HMF to DFF. The physicochemical properties of the synthesized materials were characterized by SEM, XRD, FT-IR, XPS, UV–vis, BET surface area, PL and EPR analysis. The experimental results show that the g-C 3 N 4 /BiOCl composite is superior to pure g-C 3 N 4 and BiOCl in the oxidation of 5-HMF to DFF. The improved photocatalytic performance of the g-C 3 N 4 /BiOCl composites can be attributed to the improved visible light absorption, the creation of compact and intact Z-type heterojunction, increased surface area and enhanced separation efficiency of photogenerated electron-hole pairs. In addition, the photocatalyst has high stability and reusability. A putative photocatalytic process is proposed based on the respective energy band locations of these two semiconductors.

chemistry, physical
Oxygen vacancies mediated enhanced visible-light-driven photocatalytic oxidation of biomass derived 5-hydroxymethylfurfural over V2O5·nH2O/g-C3N4 composite

Hao Wang,Danyao Huang,Qixuan Zhuge,Ying Wu

DOI: https://doi.org/10.1016/j.diamond.2023.110413

IF: 3.806

2023-11-01

Diamond and Related Materials

Abstract:A series of V2O5·nH2O/g-C3N4 (HVO/CN) heterogeneous composites were synthesized using an ultrasonic method and employed in the photocatalytic oxidation of 5-hydroxymethylfurfural (HMF) towards 2,5-diformylfuran (DFF). The HVO/CN-5 catalyst exhibited the highest photocatalytic performance with a 35.7 % yield and a 84 % of selectivity of DFF under visible light irradiation. A thorough investigation on the synthesized HVO/CN composite was executed to reveal the origin of the high photoactivity. The research results showed that the incorporation of HVO into CN widened the range of the visible-light response and improved the ability to separate the photo-induced charge carriers via a Z-scheme mechanism. Meanwhile, an increased concentration of oxygen vacancies was also observed in the composite, which enhanced the surface OH− content and facilitated the generation of hydroxyl radicals. This change is beneficial to the photocatalytic reaction since that hydroxyl and superoxide radicals are the main reactive species. A possible reaction pathway for the photocatalytic oxidation of 5-HMF to DFF was also suggested. This work may provide insights on the green and sustainable conversion of HMF to DMF via photocatalysis.

materials science, multidisciplinary,physics, applied, condensed matter, coatings & films
Highly Selective Photocatalytic Oxidation Biomass Valorization over Nb 2 O 5 / G ‐C 3 N 4 Heterojunction

Haixia Li,Hui Zhao,Yuming Dong,Yongfa Zhu,Junshan Li

DOI: https://doi.org/10.1002/aesr.202200116

2022-01-01

Advanced Energy and Sustainability Research

Abstract:The selective biomass conversion of 5‐hydroxymethylfurfural (HMF) to 2,5‐diformylfurane (DFF) through photocatalysis is of immense importance and has attracted much interest recently. However, its selectivity and conversion are still limited at present due to the lack of efficient photocatalysts to controllably activate the alcohol hydroxyl groups. Herein, Nb 2 O 5 / g ‐C 3 N 4 type‐II heterojunction photocatalysts to restrain the over‐oxidation are developed, which successfully adjust the active oxygen species and enhance the separation and transfer of photoexcited carriers. The system achieves selective oxidation of HMF to DFF with high selectivity (>99%) and conversion (53%) via the inhibition of hydroxyl radicals (·OH) production arising from the decomposition of H 2 O 2 . Moreover, h + is the main active species for photocatalytic selective oxidation of HMF, and ·O 2 − is the second for that. Herein, it offers an effective strategy to effectively improve the high‐selective conversion of biomass derivatives into high‐value‐added products.
Photocatalytic Selective Oxidation of 5-Hydroxymethylfurfural to 2,5-Diformylfuran over Nb2o5 under Visible Light

Huili Zhang,Qi Wu,Cong Guo,Ying Wu,Tinghua Wu

DOI: https://doi.org/10.1021/acssuschemeng.7b00231

IF: 8.4

2017-01-01

ACS Sustainable Chemistry & Engineering

Abstract:The photocatalytic selective oxidation of biomass derivate compound 5-hydroxymethylfurfural (HMF) to 2,5-diformylfuran is an environmentally friendly and energy-saving process. Nb2O5 was prepared and applied in the oxidation of HMF under visible light, although its bandgap energy is higher than 3.2 eV. The reaction process follows a special mechanism over a Nb2O5 catalyst different from the normal oxide semiconductor. The effect of calcination temperature, incident wavelength, and reaction time on photocatalytic performance was investigated. Nb2O5-800 exhibits the best performance in the presence of O-2 with benzotrifluoride as a solvent under visible light irradiation.
Highly Selective Photocatalytic Oxidation Biomass Valorization Over Nb2O5/g-C3N4 Heterojunction

Haixia Li,Hui Zhao,Yuming Dong,Yongfa Zhu,Junshan Li

DOI: https://doi.org/10.1002/aesr.202200116

2022-01-01

Advanced Energy and Sustainability Research

Abstract:The selective biomass conversion of 5-hydroxymethylfurfural (HMF) to 2,5-diformylfurane (DFF) through photocatalysis is of immense importance and has attracted much interest recently. However, its selectivity and conversion are still limited at present due to the lack of efficient photocatalysts to controllably activate the alcohol hydroxyl groups. Herein, Nb2O5/g-C3N4 type-II heterojunction photocatalysts to restrain the over-oxidation are developed, which successfully adjust the active oxygen species and enhance the separation and transfer of photoexcited carriers. The system achieves selective oxidation of HMF to DFF with high selectivity (>99%) and conversion (53%) via the inhibition of hydroxyl radicals (center dot OH) production arising from the decomposition of H2O2. Moreover, h(+) is the main active species for photocatalytic selective oxidation of HMF, and center dot O-2(-) is the second for that. Herein, it offers an effective strategy to effectively improve the high-selective conversion of biomass derivatives into high-value-added products.
New and highly efficient Ultra-thin g-C3N4/FeOCl nanocomposites as photo-Fenton catalysts for pollutants degradation and antibacterial effect under visible light

Shuangyan Jiang,Hongai Zheng,Xin Sun,Meilin Zhu,Yao Zhou,Derui Wang,Daquan Zhang,Lizhi Zhang

DOI: https://doi.org/10.1016/j.chemosphere.2021.133324

IF: 8.8

2022-03-01

Chemosphere

Abstract:The photo-Fenton reaction was widely used in the removal of pollutants in waste water, which makes it exhibit great potential in the field of environmental remediation. Hence, it is crucial to explore a new efficient and stable photo-Fenton catalyst driven by visible light. In this work, a simple two-step calcination method was used to synthesize sheet-like stacked Ultra-thin g-C3N4/FeOCl (CNF) materials. The morphology, composition, photo-Fenton performance, and antibacterial properties were systematically analyzed. Research results exhibited that the synthesized CNF catalysts showed enhanced visible light absorption capacity and excellent photo-Fenton performance. Compared with FeOCl alone, CNF displayed stronger degradation ability for rhodamine B (RhB) and could achieve 97% degradation within 9 min, which was about 10 times that of pure FeOCl. At the same time, the composite catalysts exhibited excellent antibacterial effects under photo-Fenton conditions. The antibacterial rate of CNF composite catalyst under photo-Fenton conditions can reach almost 99%, which was 3 times that of photocatalysis alone and 2 times that of Fenton alone. The heterojunction formed between Ultra-thin g-C3N4 and FeOCl promoted the separation of e- and h+. Simultaneously, the presence of e- promoted the cycle of Fe3+ and Fe2+ in FeOCl, thereby promoting the generation of hydroxyl radicals (OH) from H2O2 and improving the photo-Fenton activity to achieve the effect of degrading pollutants and antibacterial. The photo-Fenton catalysis and degradation mechanism were analyzed in detail. This work provided a theoretical basis for the application of CNF material in the removal of wastewater.

environmental sciences
Photocatalytic selective oxidation of biomass-derived 5-hydroxymethylfurfural to 2,5-diformylfuran under ambient conditions over CdIn2S4/g-C3N4 heterojunctions

Jifang Cui,Zhihao Yu,Linhao Sun,Ming Zhang,Mengyan Guo,Jian Xiong,Yina Qiao,Rui Zhang,Xuebin Lu

DOI: https://doi.org/10.1039/d3cy00794d

2023-08-26

Abstract:Selective photocatalytic oxidation rather than mineralisation is essential for the catalytic valorisation of biomass, which requires precise control of the generation of reactive oxygen species via the rational construction of heterogeneous junctions. In this paper, CdIn2S4/g-C3N4 (CIS/CNNS)heterojunction was constructed by microwave-assisted method and used for selective photocatalytic oxidation of 5-Hydroxymethylfurfural (HMF) to 2,5-Diformylfuran (DFF), a key intermediate for fine chemical synthesis and an important furan-based polymer monomer. According to the electron transfer mechanism of the heterojunction, the effective separation of charges and holes led to a significant enhancement of the utilization efficiency of photogenerated electrons (PGES). Specifically, the valence band (VB) potential of the constructed heterojunction did not reach the oxidation potential of ·OH/OH-, which avoided the massive generation of the strongly oxidizing active species ·OH and thus increased the reaction selectivity. Under visible light irradiation, 65.2% HMF conversion and 91.5% DFF selectivity could be achieved over CIS/CNNS, with a product yield 3.26 times higher than monomeric CdlIn2S4 and 4.2 times higher than monomeric CNNS. The radical quenching experiments verified that ·O2- was the predominant active species in the reaction process, and the ·O2- signal of the composite was significantly enhanced in the ESR characterization, achieving a highly selective conversion of HMF to DFF.

chemistry, physical
Ultra-thin G-C3n4/mfm-300(fe) Heterojunctions for Photocatalytic Aerobic Oxidation of Benzylic Carbon Centers.

Chengcheng Liu,Tian Luo,Alena M. Sheveleva,Xue Han,Xinchen Kang,Sergei Sapchenko,Floriana Tuna,Eric J. L. McInnes,Buxing Han,Sihai Yang,Martin Schroeder

DOI: https://doi.org/10.1039/d1ma00266j

2021-01-01

Materials Advances

Abstract:In situ growth of the metal-organic framework material MFM-300(Fe) on an ultra-thin sheet of graphitic carbon nitride (g-C3N4) has been achieved via exfoliation of bulk carbon nitride using supercritical CO2. The resultant hybrid structure, CNNS/MFM-300(Fe), comprising carbon nitride nanosheets (CNNS) and MFM-300(Fe), shows excellent performance towards photocatalytic aerobic oxidation of benzylic C-H groups at room temperature under visible light. The catalytic activity is significantly improved compared to the parent g-C3N4, MFM-300(Fe) or physical mixtures of both. This facile strategy for preparing heterojunction photocatalysts demonstrates a green pathway for the efficient and economic oxidation of benzylic carbons to produce fine chemicals.
A novel α-Fe2O3@g-C3N4 catalyst: Synthesis derived from Fe-based MOF and its superior photo-Fenton performance

Ting Guo,Kai Wang,Gaoke Zhang,Xiaoyong Wu

DOI: https://doi.org/10.1016/j.apsusc.2018.10.183

IF: 6.7

2019-03-01

Applied Surface Science

Abstract:Fabricating heterojunction catalysts is a promising strategy for improving the performance in heterogeneous photo-Fenton reaction (PFR). Herein, a Z-scheme heterostructured α-Fe2O3@g-C3N4 catalyst was successfully synthesized through the co-calcination of melamine and Fe-based MOF. The characterization results demonstrated that α-Fe2O3 nanoparticles anchored on the surface of g-C3N4 successfully. The degradation of tetracycline (TC) in visible-light/H2O2 system was adopted to evaluate the photo-Fenton activity of the catalysts. About 92% of TC was degraded by the optimum composite FOCN-0.45 in 60 min; the degradation rate (0.042 min−1) of TC by the FOCN-0.45 is 6, 7 and 14 times higher than that by pristine MIL-53 (Fe) (0.007 min−1), α-Fe2O3 (0.006 min−1) and g-C3N4 (0.003 min−1), respectively. The prepared FOCN-0.45 composite exhibited excellent performance and high stability in a wide range of pH value. The promoted photo-Fenton catalytic efficiency benefited from the Z-scheme heterojunctions of α-Fe2O3@g-C3N4, which enhanced the separation ability of photo-generated charge carriers and increased the electrons that participated in Fe2+/Fe3+ cycle. The boosting OH radicals degraded organic pollutants as main reactive radicals. This work presents a feasible path to design and synthesize heterogeneous photo-Fenton catalysts for the removal of organic pollutants.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Synthesis of a well-dispersed CaFe2O4/g-C3N4/CNT composite towards the degradation of toxic water pollutants under visible light

Fei Liu,Shaocan Dong,Zhaoxiang Zhang,Xiaqing Li,Xiaodong Dai,Yanping Xin,Xuewu Wang,Kun Liu,Zhenhe Yuan,Zheng Zheng

DOI: https://doi.org/10.1039/c9ra05005a

IF: 4.036

2019-01-01

RSC Advances

Abstract:Herein, we fabricated a ternary photocatalyst composed of CaFe2O4, multiwalled carbon nanotubes (CNTs) and graphitic carbon nitride (g-C3N4) via a simple hydrothermal route. CaFe2O4 acted as a photosensitizer medium and the CNT acted as a co-catalyst, which remarkably enhanced the photocatalytic performances of g-C3N4 towards the degradation of hexavalent chromium (Cr(vi)) and the antibiotic tetracycline (TC) under visible light irradiation. To investigate the morphological and topological features of the photocatalyst, field-emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM) analyses were performed. The surface properties and oxidation state of the CaFe2O4/g-C3N4/CNT composite were determined by X-ray photoelectron spectroscopy (XPS). The recombination rate of the charge carriers and the band gap values of the as-synthesized catalysts were analyzed by photoluminescence spectroscopy (PL) and diffused reflectance spectroscopy (UV/Vis DRS) studies, respectively. Besides the degradation reactions, the high hydrogen production rate of 1050 mu mol h(-1) under visible light using the CaFe2O4/g-C3N4/CNT composite loaded with 5 wt% CNT was observed. The superior photocatalytic performances of the CaFe2O4/g-C3N4/CNT composite can be ascribed to the effective heterojunction formed between g-C3N4 and the CaFe2O4 matrix, in which the CNT act as a conducting bridge in the system, promoting the production of photoinduced charge carriers in the semiconductor system. Finally, the plausible photocatalytic mechanism towards the degradation of pollutants and hydrogen production was discussed carefully.
Fabrication of Novel Cyanuric Acid Modified g-C3N4/Kaolinite Composite with Enhanced Visible Light-Driven Photocatalytic Activity

Zhiming Sun,Fang Yuan,Xue Li,Chunquan Li,Jie Xu,Bin Wang

DOI: https://doi.org/10.3390/min8100437

IF: 2.5

2018-01-01

Minerals

Abstract:A novel kind of cyanuric-acid-modified graphitic carbon nitride (g-C3N4)/kaolinite (m-CN/KA) composite with enhanced visible light-driven photocatalytic performance was fabricated through a facile two-step process. Rhodamine B (RhB) was taken as the target pollutant to study the photocatalytic performance of the synthesized catalysts. It is indicated that the cyanuric acid modification significantly enhanced photocatalytic activity under visible light illumination in comparison with the other reference samples. The apparent rate constant of m-CN/KA is almost 1.9 times and 4.0 times those of g-C3N4/kaolinite and bare g-C3N4, respectively. The superior photocatalytic performance of m-CN/KA could be ascribed, not only to the generation of abundant pore structure and reactive sites, but also to the efficient separation of the photogenerated electron-hole pairs. Furthermore, the possible photocatalytic degradation mechanism of m-CN/KA was also presented in this paper. It could be anticipated that this novel and efficient, metal-free, mineral-based photocatalytic composite has great application prospects in organic pollutant degradation.
Polymeric G-C3n4 Coupled with NaNbO3 Nanowires Toward Enhanced Photocatalytic Reduction of CO2 into Renewable Fuel

Haifeng Shi,Guoqing Chen,Chengliang Zhang,Zhigang Zou

DOI: https://doi.org/10.1021/cs500848f

IF: 12.9

2014-01-01

ACS Catalysis

Abstract:Visible-light-responsive g-C3N4/NaNbO3 nanowires photocatalysts were fabricated by introducing polymeric g-C3N4 on NaNbO3 nanowires. The microscopic mechanisms of interface interaction, charge transfer and separation, as well as the influence on the photocatalytic activity of g-C3N4/NaNbO3 composite were systematic investigated. The high-resolution transmission electron microscopy (HR-TEM) revealed that an intimate interface between C3N4 and NaNbO3 nanowires formed in the g-C3N4/NaNbO3 heterojunctions. The photocatalytic performance of photocatalysts was evaluated for CO2 reduction under visible-light illumination. Significantly, the activity of g-C3N4/NaNbO3 composite photocatalyst for photoreduction of CO2 was higher than that of either single-phase g-C3N4 or NaNbO3. Such a remarkable enhancement of photocatalytic activity was mainly ascribed to the improved separation and transfer of photogenerated electron–hole pairs at the intimate interface of g-C3N4/NaNbO3 heterojunctions, which originated from the well-aligned overlapping band structures of C3N4 and NaNbO3.
Enhanced photocatalytic activity of ternary g-C3N4/NaTaO3/biomass carbon composite photocatalysts under visible-light radiation

Shengze Li,Jinlong Liao,Yubin Dong,Yaqin Fu,Yaofeng Zhu

DOI: https://doi.org/10.1007/s10854-020-04488-z

2020-09-24

Abstract:Highly efficient visible-light-responsive ternary graphitic carbon nitride (g-C3N4)/NaTaO3/biomass carbon (BM-C) photocatalysts with different g-C3N4 amounts were prepared via a solvothermal method combined with a high-temperature sintering method. Herein, the crystal structure and morphology of g-C3N4/NaTaO3/BM-C are investigated in detail. The light-response characteristics of g-C3N4/NaTaO3/BM-C composites are effectively extended into the visible-light region. Compared with NaTaO3/BM-C and g-C3N4/NaTaO3, the g-C3N4/NaTaO3/BM-C composite showed high visible-light catalytic performance when the mass ratio of melamine (the g-C3N4 precursor) to binary NaTaO3/BM-C is 4:1, and the degradation extent of 95.85% for Rhodamine B can be reached in 60 min under visible-light irradiation. In addition, the photocatalytic mechanism showed that the enhanced photocatalytic activity of the composite may be attributed to the introduction of g-C3N4, which expanded the visible-light response range and the formation and effect of a good synergistic effect of BM-C and various components. This work provides useful insights for promoting the practical process of sodium tantalate photocatalytic materials.

engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied
A Novel Dual-Channel Carbon Nitride Homojunction with Nanofibrous Carbon for Significantly Boosting Photocatalytic Hydrogen Peroxide Production

Jianwen Zhou,Tianshang Shan,Fengshan Zhang,Bruno Boury,Liulian Huang,Yingkui Yang,Guangfu Liao,He Xiao,Lihui Chen

DOI: https://doi.org/10.1007/s42765-023-00354-9

IF: 12.958

2024-01-09

Advanced Fiber Materials

Abstract:Photocatalytic H2O2 synthesis (PHS) via graphite carbon nitride (g-C3N4) is a low-carbon and environmentally friendly approach, which has garnered tremendous attention. However, as for the pristine g-C3N4, the PHS is severely constrained by the slow transfer and rapid recombination of photogenerated carriers. Herein, we introduced cellulose-derived carbon nanofibers (CF) into the homojunction of g-C3N4 nanotubes (MCN) and g-C3N4 nanosheets (SCN). A series of photocatalytic results demonstrate that the embedding of cellulose-derived carbon for MCN/SCN/CF composite catalyst significantly improved the photocatalytic H2O2 generation (136.9 μmol·L−1·h−1) with 5-holds higher than that of individual MCN (27.5 μmol·L−1·h−1) without any sacrificial agent. This enhancement can be attributed to the combined effects of the two-step one-electron oxygen reduction reaction (ORR) on conduction band (CB) side and the water oxidation reaction (WOR) on valence band (VB) side. A comprehensive characterization of the mechanism indicates that CF enhances the absorption of light, promotes the separation and migration of photogenerated carriers, and regulates the position of the valence and conduction bands with an effective dual-channel ORR pathway for photo-synthesis of H2O2. This work provides valuable insights into utilizing biomass-based materials for significantly boosting photocatalytic H2O2 production.Graphical Abstract

materials science, multidisciplinary, textiles
Fabrication of a Carbonized Cellulose Nanofibrils/Ti 3 C 2 T x MXene/g-C 3 N 4 Heterojunction for Visible-Light-Driven Photocatalysis

Wenyue Zu,Chuang Jiang,Wei Liu,Qingxi Hou,Xingxiang Ji

DOI: https://doi.org/10.1021/acs.langmuir.2c01818

IF: 3.9

2022-10-21

Langmuir

Abstract:Photocatalytic degrading pollutants driven by visible-light irradiation has attracted tremendous attention. One strategy of preparing carbonized cellulose nanofibrils/Ti(3)C(2)T(x) MXene/g-C(3)N(4) (CMCN) as a photocatalyst was developed. The as-prepared CMCN was comprehensively characterized in terms of the chemical composition, chemical and crystal structure, morphology, and photoelectrochemical properties. The CMCN was explored as a photocatalyst and exhibited good photocatalytic performance...

chemistry, multidisciplinary, physical,materials science
Preparation of nanoscale-dispersed g-C3N4/graphene oxide composite photocatalyst with enhanced visible-light photocatalytic activity

Hui Wang,Qianhong Shen,Zengyu You,Yuxuan Su,Yang Yu,Abbas Babapour,Fang Zhang,Di Cheng,Hui Yang

DOI: https://doi.org/10.1016/j.matlet.2018.01.037

IF: 3

2018-01-01

Materials Letters

Abstract:•g-C3N4 nanoparticles with low recombination of photo-generated carriers were prepared.•A g-C3N4/graphene oxide composite with high-efficient heterojunctions was fabricated.•A facile method was proposed to prepare g-C3N4 nanoparticles composite materials.

Novel application of g-C3N4/NaNbO3 composite for photocatalytic selective oxidation of biomass-derived HMF to FFCA under visible light irradiation

Photocatalytic Selective Oxidation of HMF to DFF over Bi2WO6/mpg–C3N4 Composite under Visible Light

Bimetal-modified G-C3n4 Photocatalyst for Promoting Hydrogen Production Coupled with Selective Oxidation of Biomass Derivative

Photocatalytic selective oxidation of biomass-derived 5-hydroxymethylfurfural to 2,5-diformylfuran on metal-free g-C3N4 under visible light irradiation

Photocatalytic Selective Oxidation of HMF Coupled with H 2 Evolution on Flexible Ultrathin g-C 3 N 4 Nanosheets with Enhanced N–H Interaction

Solar-light-driven photocatalytic selective oxidation of biomass-derived 5-hydroxymethylfurfural to 2,5-diformylfuran over 2D g-C 3 N 4 /BiOCl heterostructures photocatalyst

Oxygen vacancies mediated enhanced visible-light-driven photocatalytic oxidation of biomass derived 5-hydroxymethylfurfural over V2O5·nH2O/g-C3N4 composite

Highly Selective Photocatalytic Oxidation Biomass Valorization over Nb 2 O 5 / G ‐C 3 N 4 Heterojunction

Photocatalytic Selective Oxidation of 5-Hydroxymethylfurfural to 2,5-Diformylfuran over Nb2o5 under Visible Light

Highly Selective Photocatalytic Oxidation Biomass Valorization Over Nb<sub>2</sub>O<sub>5</sub>/<i>g</i>-C<sub>3</sub>N<sub>4</sub> Heterojunction

New and highly efficient Ultra-thin g-C3N4/FeOCl nanocomposites as photo-Fenton catalysts for pollutants degradation and antibacterial effect under visible light

Photocatalytic selective oxidation of biomass-derived 5-hydroxymethylfurfural to 2,5-diformylfuran under ambient conditions over CdIn2S4/g-C3N4 heterojunctions

Ultra-thin G-C3n4/mfm-300(fe) Heterojunctions for Photocatalytic Aerobic Oxidation of Benzylic Carbon Centers.

A novel α-Fe2O3@g-C3N4 catalyst: Synthesis derived from Fe-based MOF and its superior photo-Fenton performance

Synthesis of a well-dispersed CaFe2O4/g-C3N4/CNT composite towards the degradation of toxic water pollutants under visible light

Fabrication of Novel Cyanuric Acid Modified g-C3N4/Kaolinite Composite with Enhanced Visible Light-Driven Photocatalytic Activity

Polymeric G-C3n4 Coupled with NaNbO3 Nanowires Toward Enhanced Photocatalytic Reduction of CO2 into Renewable Fuel

Enhanced photocatalytic activity of ternary g-C3N4/NaTaO3/biomass carbon composite photocatalysts under visible-light radiation

A Novel Dual-Channel Carbon Nitride Homojunction with Nanofibrous Carbon for Significantly Boosting Photocatalytic Hydrogen Peroxide Production

Fabrication of a Carbonized Cellulose Nanofibrils/Ti 3 C 2 T x MXene/g-C 3 N 4 Heterojunction for Visible-Light-Driven Photocatalysis

Preparation of nanoscale-dispersed g-C3N4/graphene oxide composite photocatalyst with enhanced visible-light photocatalytic activity