Abstract:This paper presents characterization and compensation of the thermal bias drift of a MEMS accelerometer whose effective stiffness is electrostatically tuned to a low value with the help of the single-sided parallel plates (SSPPs) capacitors. A temperature drift model for the proposed accelerometer is built and the temperature effect on the mechanical stiffness and the circuit gains is characterized. The characterization reveals that the variations of the feedforward coefficient including the mechanical stiffness and the readout gain due to the temperature change play a significant role in the bias drift of output of the proposed closed-loop accelerometer. On the other hand, the variations of both feedback gain and tuning gain as a function of temperature are one-order-of-magnitude less than that of the feedforward coefficient. To calibrate the feedforward coefficient, an excitation signal as a form of AC reference displacement is introduced to drive the proof mass and the readout response is demodulated to calibrate the variance of the feedforward coefficient correspondingly. An open-loop compensation scheme for the temperature-induced bias drift using the variance of the calibrated response is proposed accordingly. Alternatively, the calibrated response can be controlled to a preset value by a new proportion integral derivative (PID) controller by the adjustment of the SSPP tuning voltage. The output of the PID controller is used for the calibration of the introduced bias from the electrostatic tuning force. Therefore, a closed-loop compensation of the thermal bias drift is achieved by remaining the feedforward coefficient while eliminating the calibrated bias. Experiments under a temperature cooling process and different tuning voltages are carried out to verify two proposed compensation schemes. The temperature drift coefficients (TDCs) of both compensated outputs exhibit at least one-order-of-magnitude reduction in response to the temperature change. When the effective stiffness of the accelerometer is tuned to about 4.19 N m(-1), the TDC of the compensated output using the proposed open-loop or closed-loop compensation schemes is reduced to about 0.1136 or 0.0391 mg degrees C-1, respectively and meanwhile, the Allan bias instability is slightly increased to 48.63 or 56.14 mu g, respectively.

In-run Self-calibration of Scale Factor Temperature Drifts for MEMS Gyroscope

Temperature Drift Compensation of a Tuned Low Stiffness MEMS Accelerometer Based on Double-Sided Parallel Plates

Characterization and Compensation of Thermal Bias Drift of a Stiffness-Tunable MEMS Accelerometer

Temperature Bias Drift Phase-Based Compensation for a MEMS Accelerometer with Stiffness-Tuning Double-Sided Parallel Plate Capacitors

Research on Low Temperature Drift Suppression of Micro-Machined Gyroscope Based on Self-Calibration Technology

A 0.09°/h Bias-Instability MEMS Gyroscope Working with a Fixed Resonance Frequency

A Real-Time Temperature Compensation Algorithm for a Force-Rebalanced MEMS Capacitive Accelerometer Based on Resonant Frequency.

A Temperature Drift Suppression Method of Mode-Matched MEMS Gyroscope Based on a Combination of Mode Reversal and Multiple Regression

Online Self-Compensation For Enhanced The Scale Factor Stability Of A Micromachined Gyroscope

A Stiffness-tunable MEMS Accelerometer with In-operation Drift Compensation

Design and Test of MEMS Gyroscope Control System Based on LMSD

Patient Navigation Significantly Reduces Delays in Breast Cancer Diagnosis in the District of Columbia

Integrating Multiple Hierarchical Parameters to Achieve the Self-Compensation of Scale Factor in a Micro-Electromechanical System Gyroscope

Automatic Calibration and Nonlinearity Optimization for Scale Factor of MEMS Gyroscopes under Force Rebalanced Operation

Temperature Drift Compensation for Four-Mass Vibration MEMS Gyroscope Based on EMD and Hybrid Filtering Fusion Method

MEMS Gyroscope Temperature Compensation Based on Drive Mode Vibration Characteristic Control

Thermal calibration for triaxial gyroscope of MEMS-IMU based on segmented systematic method

Self-Calibration Technique with Lightweight Algorithm for Thermal Drift Compensation in MEMS Accelerometers

Mems Gyroscope Bias Drift Self-Calibration Based On Noise-Suppressed Mode Reversal

Temperature Drift Error Compensation for MEMS Gyroscopes Based on SVR

An 8PPM/°C Temperature Sensitivity of the Scale Factor in MEMS Gyroscope Based on Multi Parameters Fusion Compensation Method