Abstract:The reduction processes of Fe-Mo-O catalysts with different Fe/Mo atomic ratios were studied by means of temperature-programmed reduction (TPR). In particular, the reduction process of a sample with an Fe/Mo ratio of 0.29 was investigated in detail in combination with in situ Mössbauer spectroscopy (MBS) and X-ray diffraction (XRD). Five peaks are observed in the TPR profile of this sample with peak temperatures at 853, 910, 952, 1014, and 1233 K, respectively, indicating that the reduction of the catalyst proceeds via five stages. MBS and XRD showed that the phases in the sample are MoO3 and Fe2(MoO4)3 before TPR. At the first TPR peak (853 K), Fe2(MoO4)3 was completely transformed into β-FeMoO4 and Mo4O11, while MoO3 was not affected. The β-FeMoO4 phase that formed can convert to α-FeMoO4 when the reduced sample is exposed to air at room temperature. The second TPR peak (910 K) corresponds to the reduction of MoO3 to MoO2. At the third TPR peak (952 K), Mo4O11 was reduced to MoO2 and most of the β-FeMoO4 was transformed to Fe2Mo3O8 and Fe3O4. The Mössbauer spectrum of FeMo3O8 can be fitted with two doublets (IS = 0.90 mm/sec, QS = 0.58 mm/sec and IS = 1.03 mm/sec, QS = 1.05 mm/sec). It is interesting to note that at this stage some Fe2+ ions were reoxidized to Fe3+, and Fe3O4 is formed, probably due to the reaction between Mo6+ and Fe2+ in β-FeMoO4. At the fourth TPR peak (1014 K), β-FeMoO4 was completely converted and the Fe-Mo alloy (a singlet in the Mössbauer spectrum with IS = -0.21 mm/sec) was formed, resulting from the reduction of MoO2 and Fe3O4 or Fe2Mo3O8. At the last peak (1233 K), all the metal oxides (MoO2 and Fe3O4 or Fe2Mo3O8) were reduced to metals. The products detected are Fe3Mo alloy and metallic molybdenum.

Temperature-dependent Formation of Redox Sites in Molybdenum Trioxide Studied by Electron Paramagnetic Resonance Spectroscopy

Singlet Oxygen Triggered by Superoxide Radicals in a Molybdenum Cocatalytic Fenton Reaction with Enhanced REDOX Activity in the Environment.

FT-IR Emission Spectroscopic Studies of Metal Oxide Catalysyts I. Experimental Respects and Reduction-reoxidation of Molybdenum Trioxide

The Reduction Behavior of Fe-Mo-O Catalysts Studied by Temperature-Programmed Reduction Combined with in Situ Mössbauer Spectroscopy and X-Ray Diffraction

A study on the reduction behavior of Fe2(MoO4)3 with a combined in-situ temperature-programmed reduction-M?ssbauer spectroscopic technique

Thermal Stability and High-Temperature Photoluminescence of Chemical Vapor Deposited MoS2 in Different Atmosphere

Facile Fabrication of Amorphous Molybdenum Oxide As a Sensitive and Stable SERS Substrate under Redox Treatment.

Redox Properties of Titanium Oxides on Pt3Ti

Optical absorption studies in molybdenum trioxide thin films

Investigation of Deoxidation Process of MoO3 Using Environmental TEM

Thermodynamics of Molybdenum Trioxide Encapsulated in Zeolite Y

FT-IR Emission Spectroscopy Studies of Molybdenum Oxide and Supported Molybdena on Alumina, Silica, Zirconia, and Titania

Modulation of Reactive Species in Peroxymonosulfate Activation by Photothermal Effect: A Case of MOF-derived ZnFe2O4/C

Reduction Property of Rare Earth Oxide Doped Molybdenum Oxide

Local Electron Environment Regulation of Spinel CoMn 2 O 4 Induced Effective Reactant Adsorption and Transformation of Lattice Oxygen for Toluene Oxidation

Molybdenum Trioxide Nanostructures Prepared by Thermal Oxidization of Molybdenum

A Study of Effect of Rare Earth on the Reduction Behavior of Molybdenum Oxide and Property of Molybdenum Powder

Optimizing 3d spin polarization of CoOOH by in situ Mo doping for efficient oxygen evolution reaction

Reversible redox reactions in an epitaxially stabilized SrCoOx oxygen sponge

Oxidation of Molybdenum-Based Single-Metallic/bimetallic Carbide MXenes in Aqueous Suspensions: Mechanistic Insights

Valence- and element-dependent water oxidation behaviors: in situ X-ray diffraction, absorption and electrochemical impedance spectroscopies.