Abstract:After silicate impregnation, the content and distribution of elements in the modifier is an important index to evaluate the impregnation effect, which plays an important role in the physical and mechanical properties of the modified Chinese fir. The effects of the biomimetic respiration method on the density, bending strength, compressive strength, three section hardness and 24 h water absorption of silicate modified Chinese fir were studied. The chemical composition and structure of unmodified and modified Chinese fir were analyzed by XPS and FTIR, and the distribution depth and law of silicate modifier in the modified Chinese fir were discussed. The results showed that the average density of the modified Chinese fir was more than 0. 721 g . cm(-3), the bending strength and compressive strength increased by 170.19% and 286.64%, respectively. The hardness of the transverse section, radial section and tangential section of the modified Chinese fir increased in different degrees. The 24h water absorption of Chinese fir decreased from 91.17%+/- 2.51% to 39.23%+/- 1.62% after silicate modification, which indicated that the dimensional stability of Chinese fir was greatly improved. Compared with the unmodified Chinese fir, the absorption peaks of Na and Si elements appear in the XPS full-spectrum scanning of the modified Chinese fir wood, and the chemical structures of Si-O-C and Na-O appear in the narrow spectrum scanning. At the same time, the absorption peak of Si-O-Si appeared in the FTIR spectrum of the modified Chinese fir wood, the content of free hydroxyl decreased, and the associated hydroxyl increased. XPS and FTIR analysis showed that silicates were impregnated into the pores of Chinese fir wood, and sodium silicate formed a chemical bond and hydrogen bond with hydroxyl in Chinese fir wood. This was also an important reason for the improvement of mechanical properties and water resistance of modified Chinese fir. In addition, it was found by XPS that C, O, Na and Si elements appeared along the transverse direction from the surface to 30 mm. The absorption peak intensity of Si-O C bonding structure was basically the same from the surface to 30 mm, which indicated that the chemical bond between sodium silicate and hydroxyl groups in Chinese fir wood was formed more evenly from the surface to the middle part. It was found that the relative contents of C, O, Na and Si element in the modified Chinese fir wood were slightly different from the surface to the middle part (30 mm). The results showed that the modifier was in the middle of Chinese fir wood, and the uniformity was good. The research results will provide data support for the impregnation modification effect of Chinese fir, and provide the basis for optimizing the modification process and method, and further improving the physical and mechanical properties of modified Chinese fir.

Use Impregnation and Densification to Improve Mechanical Properties and Combustion Performance of Chinese Fir

Evaluating the Mechanical and Fire-Resistance Properties of Modified Fast-Growing Chinese Fir Timber with Boric-Phenol-formaldehyde Resin

High-Pressure Treatment of Chinese Fir Wood: Effect on Density, Mechanical Properties, Humidity-Related Moisture Migration, and Dimensional Stability

Research on Fire Retardant Performance of Wood with the Compound of Potassium Carbonate and SiO2 Gels

Comparison of Silicate Impregnation Methods to Reinforce Chinese Fir Wood

Application of High Pressure Processing on Fast-growing Chinese Fir

Preparation and Characterization of Phenolic Prepolymer Impregnated Chinese Fir by Cyclic Increasing-Pressure Method with Green and Efficient

Study on Phenol–Formaldehyde Resin–Montmorillonite Impregnation and Compression Modification of Chinese Fir

Preparation and Characterization of Sodium Silicate Impregnated Chinese Fir Wood with High Strength, Water Resistance, Flame Retardant and Smoke Suppression

Incorporation of In Situ Synthesized Nano-Copper Modified Phenol-Formaldehyde Resin to Improve the Mechanical Properties of Chinese Fir: A Preliminary Study

Comparative Study of Organic and Inorganic Modification of Chinese Fir Wood Based on the Respiratory Impregnation Method

Study on Impregnation Formula and Process Optimization for Flame Retardant of Chinese Fir

Effective strategy for fabricating surface impregnated and unilaterally densified wood with furfuryl alcohol/flame retardants for enhanced mechanical performance and flame retardancy

Influence of Component Fractions and Structure Characteristic on the Combustion Behavior of Densified Wood

Improved Thermal Stabilities, Ablation and Mechanical Properties for Carbon Fibers/Phenolic Resins Laminated Composites Modified by Silicon-containing Polyborazine

Effect of Modification on Mechanical Property and Fire-Retardant Behavior of Fast-Growing Poplar Wood

Effect of Biomimetic Respiration Method on the Impregnation Effect of Silicate Modified Chinese Fir by XPS and FTIR Analysis

Study on modification of Chinese fir for furniture and floor by resin impregnation

Infusing phytate-based biomass flame retardants into the cellulose lumens of Chinese fir wood attains superior flame retardant efficacy

Improvement of Mechanical, Hydrophobicity and Thermal Properties of Chinese Fir Wood by Impregnation of Nano Silica Sol

Flame-retardant, Heat-Insulating and Char Formation Properties of Densified Pinus Sylvestris Treated with Different Compression Pressures