Abstract:Ni-rich layered cathode materials are important candidates for lithium-ion batteries used for high energy density applications, such as electric vehicles. However, its capacity fades during cycling, especially when a high cut off charge voltage is applied (>4.4 V). To understand the origin of this capacity fade, comprehensive diagnostic tools are applied to understand their structure, chemical and morphological properties during cycling. X-ray diffraction results show that while the LiNi0.6Mn0.2Co0.2O2 (NMC622) can mostly recover its original structure at fully discharged state, even after 0.95 Li is extracted (charged to 5.2 V), it does undergo slab sliding that leads to stacking fault (O1 type) which does not go away during cycling. In addition, transmission X-ray imaging (TXM) results indicate that cycling can induces Li content inhomogeneity within the particle. As a result, the strain builds up and is directly responsible for the cracking of primary and secondary particles. Hard X-ray absorption spectroscopy (XAS) results indicate that both Ni and Co contribute to the capacity by going through the Ni3+/Ni4+ and Co3+/Co4+ redox couples. A comparison is made between Ni-rich and the Li-rich layered materials, which is well known for the problem of oxygen release. It is found that for the Ni-rich system, the oxidization state of transition metals (bulk) are well maintained during cycling, whereas for the Li-rich system the average oxidization states keep decreasing (lower oxidation states at both fully charged and fully discharged states after cycling than the pristine sample), suggesting at least the bulk of Ni-rich material is robust against oxygen release. Soft XAS that differentiates the surface chemical information from the bulk indicates that inactive rock salt phase is formed during cycling. These results show that cycling induced strain, stacking fault and surface reconstruction are the main issues to be addressed for further improvement of this material. Acknowledgement This project was supported by the U.S. Department of Energy, the Assistant Secretary for Energy Efficiency and Renewable Energy, Office of Vehicle Technologies through Advanced Battery Material Research (BMR) program (Battery500 consortium) under Contract No. DESC0012704. This research used resources 8-ID and 28-ID-2 of the National Synchrotron Light Source II, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Brookhaven National Laboratory under contract no. DE-SC0012704. The authors would also like to acknowledge the use of beamline 6-2c of Stanford Synchrotron Radiation Lightsource, SLAC National Accelerator Laboratory, supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences under contract no. DE-AC02-76SF00515.

Structure and Thermal Stability of LiNi0.8Co0.15Al0.05O2 after Long Cycling at High Temperature

Cycling stability of LiNi0.80Co0.15Al0.05O2 cathode modified by solid-state electrolyte film

Degradation Mechanism of Ni-Rich Layered Cathode Materials During High Voltage Cycling Revealed by Multi-Model Synchrotron X-Ray Imaging and Spectroscopy Techniques

Realizing Superior Cycling Stability of Ni-Rich Layered Cathode by Combination of Grain Boundary Engineering and Surface Coating

Understanding high-temperature cycling-induced crack evolution and associated atomic-scale structure in a Ni-rich LiNi0.8Co0.1Mn0.1O2 layered cathode material

Enhancing High Cycle Stability of Ni-rich LiNi0.94Co0.04Al0.02O2 Layered Cathode Material

Surface coating for high-nickel cathode materials to achieve excellent cycle performance at elevated temperatures

Unraveling the Degradation Process of LiNi0.8Co0.15Al0.05O2 Electrodes in Commercial Lithium Ion Batteries by Electronic Structure Investigations

Boosting Cell Performance of LiNi 0.8 Co 0.15 Al 0.05 O 2 via Surface Structure Design.

Atomic Insight into the Layered/Spinel Phase Transformation in Charged LiNi0.80Co0.15Al0.05O2 Cathode Particles

Structural analysis of deeply charged Li(Ni0.95Co0.04Al0.01)O2 cathode for Li‐ion battery

Pre-Deoxidation of Layered Ni-Rich Cathodes to Construct a Stable Interface with Electrolyte for Long Cycling Life

Enhancing Surface and Crystal Stability of the Ni-High NCA Cathode for High-Energy and Durable Lithium-Ion Batteries

Identifying the chemical and structural irreversibility in LiNi0.8Co0.15Al0.05O2 – a model compound for classical layered intercalation

Reversibility of Ni-Rich Layered Cathode Material Revealed by Structural, Spectroscopic and Imaging Characterizations

Deterioration mechanism of LiNi0.8Co0.15Al0.05O2/graphite-SiOx power batteries under high temperature and discharge cycling conditions

Optimized structure stability and cycling performance of LiNi0.8Co0.1Mn0.1O2 through homogeneous nano-thickness Al2O3 coating

A New Insight into the Capacity Decay Mechanism of Ni‐Rich Layered Oxide Cathode for Lithium‐Ion Batteries

Structural and Thermal Stabilities of Layered Li(Ni1/3Co1/3Mn1/3)O2 Materials in 18650 High Power Batteries

The cycle performance of high nickel cathode materials significantly enhanced by the LiAlO2@Al2O3 dual-modified coating

Improved high-voltage performance of LiNi0.87Co0.1Al0.03O2 by Li+-conductor coating