Abstract:Pr0.5Sr0.5Cr0.1Fe1-xNixO3-δ (PSCFNx, x=0.1,0.2) catalysts are prepared and utilized as electrodes in symmetric solid oxide fuel cells (SOFCs) for hydrogen oxidation reaction (HOR) and oxygen reduction reaction (ORR). Although, the PSCFNx cathode retains its perovskite phase during operation in SOFCs, the anode is totally decomposed and decorated with exsolved metallic Ni-Fe alloy (denoted as re-PSCFN) in a reducing atmosphere. Electrochemical impedance spectroscopy (EIS) combined with distribution of relaxation times (DRT) analysis reveals that the rate-limiting step for the HOR at the anode is the hydrogen adsorption-dissociation process. While the charge transfer process is found to dominate the ORR at the cathode. As the doping of Ni is increased, the cathode polarization resistance for ORR decreases from 0.19 Ω·cm2 for PSCFN0.1 to 0.09 Ω·cm2 for PSCFN0.2 at 800 °C in air. A similar trend is observed for the anode polarization resistance for HOR, which exhibits a reduction from 2.46 Ω·cm2 of re-PSCFN0.1 to 1.28 Ω·cm2 of re-PSCFN0.2 at 800 °C in H2. When fueled with hydrogen, the single cell based on the PSCFN0.2/La0.8Sr0.2Ga0.8Mg0.2O3-δ (LSGM)(240μm)/re-PSCFN0.2 configuration delivers a maximum power density of 623 mW·cm-2 and slight performance degradation when operated for 220 h at 800 °C. Ni doping results in the charge redistribution of B-site ions. Increasing the doping level of Ni results in additional electron transfer channels and oxygen vacancies that adsorb more oxygen species, which facilitates the ORR performance. Furthermore, an increase in the number of Ni-Fe nanoparticles and creation of abundant interfaces in the anode promotes HOR. This work suggests that PSCFN0.2 has the potential to be an excellent electrode material for a symmetric SOFC.

Highly Active Self-Assembled Hybrid Catalyst with Multiphase Heterointerfaces to Accelerate Cathodic Oxygen Reduction of Intermediate-Temperature Solid Oxide Fuel Cells

A Highly Active Hybrid Catalyst Modified (La0.60sr0.40)0.95co0.20fe0.80o3-Δ Cathode for Proton Conducting Solid Oxide Fuel Cells

Effectively Promoting Activity and Stability of a MnCo2O4-Based Cathode by In Situ Constructed Heterointerfaces for Solid Oxide Fuel Cells

Enhanced oxygen reduction kinetics by a porous heterostructured cathode for intermediate temperature solid oxide fuel cells

High-Performanced Cathode with A Two-Layered R-P Structure for Intermediate Temperature Solid Oxide Fuel Cells

Oxygen Reduction Kinetic Enhancements of Intermediate-Temperature SOFC Cathodes with Novel Nd0.5Sr0.5CoO3-δ/Nd0.8Sr1.2CoO4±δ Heterointerfaces

An efficient and prospective self-assembled hybrid electrocatalyst for symmetrical and reversible solid oxide cells

A Micro-Nano Porous Oxide Hybrid for Efficient Oxygen Reduction in Reduced-Temperature Solid Oxide Fuel Cells.

High performance solid oxide fuel cells with electrocatalytically enhanced (La, Sr)MnO3 cathodes

Enhancing ORR activity and CO2 tolerance of Pr0.4Sr0.6Co0.2Fe0.8O3--based SOFC cathode through synergistic doping and surface modification

Development Of Nanostructured And Palladium Promoted (La,Sr)Mno3-Based Cathodes For Intermediate-Temperature Sofcs

Boosting the Performance and Stability of Perovskites by Construction of NiFe Alloy and PrOx Heterogeneously Structured Composites for High‐Performance Solid Oxide Fuel Cell Anode

Efficient Electro‐Catalysts for Enhancing Surface Activity and Stability of SOFC Cathodes

Enhancing the oxygen reduction reaction activity of SOFC cathode via construct a cubic fluorite/perovskite heterostructure

Enhancing the Performance of Symmetrical Solid Oxide Fuel Cells with Sr2Fe1.5Mo0.5O6-δ Electrodes Via Infiltration of Pr6O11 Bifunctional Catalyst

Conformal Electrocatalytic Surface Nanoionics for Accelerating High-Temperature Electrochemical Reactions in Solid Oxide Fuel Cells

Perovskite Chromite With In-Situ Assembled Ni-Co Nano-Alloys: A Potential Bifunctional Electrode Catalyst for Solid Oxide Cells

A Cobalt‐Free Multi‐Phase Nanocomposite As Near‐Ideal Cathode of Intermediate‐Temperature Solid Oxide Fuel Cells Developed by Smart Self‐Assembly

Bifunctional electrocatalysts Pr0.5Sr0.5Cr0.1Fe1-xNixO3-δ (x=0.1,0.2) for HOR and ORR of a symmetric solid oxide fuel cell

Temperature-controlled in-situ construction of composition-tunable nanoparticle-decorated SOFC cathodes with enhanced oxygen reduction kinetics and CO 2 tolerance

Nanoengineering electrode for yttria-stabilized zirconia-based symmetrical solid oxide fuel cells to achieve superior output performance