Abstract:Li-rich Mn-based layered oxide (LMLO) cathode materials have high-capacity and high-energy density, which are highly potential for next generation Li-ion batteries; however, their disadvantages of low initial coulombic efficiency, poor cyclic stability, large voltage fading during cycling and poor rate capability hinder their practical applications. In this work, a novel surface modification strategy to improve the electrochemical properties of LMLO cathodes is developed, where a highly reductive compound of LiBH4 is adopted as an additive to a conventional electrolyte. Examined by a conventional LMLO material of Li1.2Ni0.13Co0.13Mn0.54O2- (L1.2M0.54LO), the cyclic stability and rate capability of the cathode are significantly improved when 0.3 wt.% LiBH4 is added. The cathode has an initial reversible discharge capacity of 280 mAh g(-1) at 20 mA g(-1), showing the capacity retention of 94.3% after 100 cycles. A capacity of 193 mAh g(-1) maintains after 300 cycles at 200 mA g(-1), corresponding to the capacity retention of 86.2%, and the capacity reaches as high as 138 mAh g(-1) at 2000 mA g(-1). It is found that partial transition metals (TMs) at the surface of the L1.2M0.54LO particles are reduced by LiBH4 during the initial several cycles of activation, resulting in an in situ formation of a stable and lithium-diffusion feasible spinel structure surface coating in thickness of several nanometers with atomic match to the bulk particle. The surface coating not only retards the dissolution of the TMs from L1.2M0.54LO to the electrolyte, stabilizing the crystal structure during cycling, but also facilitates the lithium diffusion. As a result, the cyclic stability and rate capability of the cathode are evidently improved. The method is facile, scalable, and low cost, which has potential for commercial utilization.

Constructing tri-functional modification for spinel LiNi<sub>0.5</sub>Mn<sub>1.5</sub>O<sub>4</sub> <i>via</i> fast ion conductor

Ordered LiNi0.5Mn1.5O4 Cathode in Bis(fluorosulfonyl)imide-Based Ionic Liquid Electrolyte: Importance of the Cathode-Electrolyte Interphase

Improved Li-ion Diffusion and Stability of a LiNi0.5Mn1.5O4 Cathode Through in Situ Co-Doping with Dual-Metal Cations and Incorporation of a Superionic Conductor

One-step calcination synthesis of interface-coherent crystallized and surface-passivated LiNi0.5Mn1.5O4 for high-voltage lithium-ion battery

One-pot synthesis and multifunctional surface modification of lithium-rich manganese-based cathode for enhanced structural stability and low-temperature performance

Overlithiation-driven structural regulation of lithium nickel manganese oxide for high-performance battery cathode

Stabilizing a high-voltage LiNi0.5Mn1.5O4 cathode towards all solid state batteries: a Li-Al-Ti-P-O solid electrolyte nano-shell with a host material

Enhancement of LiNi0.5Mn1.5O4 Cathode Materials Through Interfacial Modification of Amorphous Al2O3 in Lithium Ion Batteries

Enhancing the Electrochemical Performance of High Voltage LiNi0.5Mn1.5O4 Cathode Materials by Surface Modification with Li1.3Al0.3Ti1.7(PO4)3/C

A novel surface modification strategy for Li-rich Mn-based layered oxide cathodes of high-capacity and high-cyclic stability by an additive of LiBH<sub>4</sub> to the electrolyte

Enhanced High Voltage Stability of Spinel‐Type Structured LiNi 0.5 Mn 1.5 O 4 Electrodes: Targeted Octahedral Crystal Site Modification

Enhancing Orbital Interaction in Spinel LiNi0.5Mn1.5O4 Cathode for High‐Voltage and High‐Rate Li‐Ion Batteries

Inhibit the strain accumulation for 5 V spinel cathode by mitigating the phase separation during high voltage stage

Strengthening Reversibility at High Rate of Spinel LiMn2O4 by Aluminum and Copper Co-doping for Lithium Ion Battery

Enhancing the Power Capability of Lithium-Rich Manganese-Based Layered Oxide Cathodes by LaF3 Modification

Optimized Morphology and Tuning the Mn3+ Content of LiNi0.5Mn1.5O4 Cathode Material for Li-Ion Batteries

Ultrafast, in Situ Transformation of a Protective Layer on Lithium-Rich Manganese-Based Layered Oxides for High-Performance Li-ion Batteries

Local Electronic Structure Modulation Enables Fast‐Charging Capability for Li‐Rich Mn‐Based Oxides Cathodes With Reversible Anionic Redox Activity

Manipulation of an ionic and electronic conductive interface for highly-stable high-voltage cathodes

Interfacial-engineering-enabled High-Performance Li-rich Cathodes

Bifunctional urea surface-modified high voltage LiNi0.5Mn1.5O4 cathode for enhanced electrochemical performance