Abstract:LiNi0.8Mn0.1Co0.1O2||SiOx@graphite has received great attention in both academia and industry because it has the highest energy density among state-of-the-art commercial lithium-ion batteries. However, it suffers from severe capacity decay during high-temperature cycling or storage, which still needs to be addressed for its commercialization. In this work, fluoroethylene carbonate (FEC) is employed as an additive or a cosolvent to improve the high-temperature performance of 1 Ah LiNi0.8Mn0.1Co0.1O2||SiOx@graphite pouch cells. By adding 5% FEC as additive, the capacity retention increases from 54.5% to 67.0% after 100 cycles at 45 °C. The use of FEC as a cosolvent further increases the capacity retention to 83.3%. The improvement is ascribed to the multifunctional effects from FEC, preventing electrolyte decomposition, mitigating the resistance increment and Mn ions dissolution with the formation of the interface films, which consist of LiF and LiPOxFy species. Therefore, the employment of FEC is of great importance for the development of high-energy-density lithium-ion batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01679?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01679</a>.(Figure S1) Cycling performance of the NMC811||SiOx@Gr pouch cells with different electrolyte systems at 0.3 C and room temperature for 100 cycles; (Figure S2) EIS of the NMC811||SiOx@Gr pouch cells after formation and 100 cycles at 0.3 C and 45 °C; (Figure S3) SEM images of the NMC811 cathodes at raw state and after 100 cycles with the blank, 5% FEC system, and 30% FEC system; (Figure S4) TEM results of the SiOx@Gr anodes after 100 cycles for the three systems and at raw state; (Figure S5) GC-MS chromatograms of the three electrolytes after formation and 100 cycles at 45 °C; (Table S1) charge/discharge capacities and Coulombic efficiency in the first formation cycle of the NMC811||SiOx@Gr pouch cells using the three electrolyte systems; (Table S2) charge/discharge specific capacities of the NMC811 electrodes using different electrolyte systems in the voltage range of 3.0–4.2 V at 0.3 C and 45 °C; (Table S3) charge/discharge specific capacities of the SiOx@Gr anodes using different electrolyte in the voltage range of 0.005–4.2 V at 0.3 C and 45 °C; (Table S4) The main electrolyte components detected from GC-MS for the three electrolyte systems after formation and 100 cycles; (Table S5) LC-QTOF-MS results collected from the electrolytes after 100 cycles; (Table S6) LC-QTOF-MS results collected from the NMC811 cathodes after 100 cycles; (Table S7) LC-QTOF-MS results collected from the SiOx@Gr anodes after 100 cycles (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01679/suppl_file/ae0c01679_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Improving Cyclic Stability of LiNi0.6Co0.2Mn0.2O2-SiOx/graphite Full Cell Using Tris(trimethylsilyl)phosphite and Fluoroethylene Carbonate As Combinative Electrolyte Additive

Improved Cyclic Stability of LiNi0.8Mn0.1Co0.1O2 Cathode Enabled by a Novel CEI Forming Additive

Multifunctional Fluoroethylene Carbonate for Improving High-Temperature Performance of LiNi 0.8 Mn 0.1 Co 0.1 O 2 ||SiO x @Graphite Lithium-Ion Batteries

Systematic Investigation of Electrochemical Performances for Lithium-Ion Batteries with Si/Graphite Anodes: Effect of Electrolytes Based on Fluoroethylene Carbonate and Linear Carbonates

Improving the Rate Performance and Stability of LiNi0.6Co0.2Mn0.2O2 in High Voltage Lithium-Ion Battery by Using Fluoroethylene Carbonate As Electrolyte Additive

A novel trimethylsilyl 2-(fluorosulfonyl)difluoroacetate additive for stabilizing the Ni-rich LiNi0.9Co0.05Mn0.05O2/electrolyte interface

Enhancing the interfacial stability of high‐energy Si/graphite||LiNi0.88Co0.09Mn0.03O2 batteries employing a dual‐anion ionic liquid‐based electrolyte

Synergistic Effect of TMSPi and FEC in Regulating the Electrode/Electrolyte Interfaces in Nickel-Rich Lithium Metal Batteries.

Multifunctional Fluoroethylene Carbonate for Improving High-Temperature Performance of LiNi0.8Mn0.1Co0.1O2||SiOx@Graphite Lithium-Ion Batteries

Improved SiGr/NCM523 Cycling via Triethyl Phosphate-Solubilized Lithium Nitrate Electrolyte

Enhancing Compatibility Between LiNi0.8Co0.1Mn0.1O2 and LiPF6-based Electrolyte Via Bis(trimethylsilyl)oxalate Additive

Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries

Electrolyte Optimization to Improve the High-Voltage Operation of Single-Crystal LiNi0.83Co0.11Mn0.06O2 in Lithium-Ion Batteries

Tris(trimethylsilane) Phosphite Additive for Improving the High Voltage Cycling Performance of a Nickel-Rich Layered Oxide Cathode Material

Bicomponent Electrolyte Additive Excelling Fluoroethylene Carbonate for High Performance Si-based Anodes and Lithiated Si-S Batteries

Stabilizing Ni-Rich LiNi0.83Co0.12Mn0.05O2 with Cyclopentyl Isocyanate As a Novel Electrolyte Additive

Enhancing Cycle Life of Nickel-Rich LiNi0.9Co0.05Mn0.05O2 Via a Highly Fluorinated Electrolyte Additive - Pentafluoropyridine

Effect of Fluoroethylene Carbonate As an Electrolyte Solvent in the LiNi0.5Mn1.5O4/Li4Ti5O12 Cell

Enhanced High-Voltage Cyclability of LiNi0.5Co0.2Mn0.3O2-based Pouch Cells Via Lithium Difluorophosphate Introducing As Electrolyte Additive

Tuning the Interface Stability of Nickel-Rich NCM Cathode Against Aggressive Structural Collapse via the Synergistic Effect of Additives

Molecular-Cling-Effect of Fluoroethylene Carbonate Characterized via Ethoxy(pentafluoro)cyclotriphosphazene on SiOx/C Anode Materials - A New Perspective for Formerly Sub-Sufficient SEI Forming Additive Compounds