Abstract:As the power density of the power transmission device increases, heat exchangers are required to dissipate more heat and provide better flow resistance in the limited space of the vehicle. In this study, the synergy mechanism of the temperature field, pressure field, and velocity field in the serrated fin channel of the plate-fin heat exchanger (PFHX) was thoroughly analyzed under the guidance of the three-field synergy principle. This study also quantitatively revealed the distribution of the angle θ between the temperature gradient and velocity, and the angle α between the pressure gradient and velocity. For the regions in the channel where θ was too large (i.e., poor synergy between temperature and velocity fields) and α was too small (i.e., poor synergy between pressure and velocity fields), high-efficiency and low-resistance fin structures were proposed. The performance improvement of the new structures was quantified using the comprehensive heat transfer and flow resistance performance evaluation plot in the three-field synergy standard. The results indicate that the new structures improve the synergy of the three fields in the channel. When the air velocity is 15 m s −1 , the average synergy angle θ m between the temperature gradient and the velocity of the two structures, changing the inlet flow direction and the slotted fin, decreases from 83.4° to 80.3° and 82.8°, respectively. The outlet temperature increases by 2.3 and 1.6 K, respectively, compared to the basic structure, indicating enhanced the heat transfer of the PFHX. By changing the shape of the fin cross-section, the average synergy angle α m between the pressure gradient and the velocity increased from 143.6° to 150.8°, while θ m increased by only 0.6°. The pressure loss was reduced by 15.2% compared to the basic structure, resulting in a significant decrease in pressure drop while maintaining essentially the same heat transfer performance. Meanwhile, the optimized PFHX can increase the heat transfer rate by 0.2%–8% under identical pump power. This work provides guidance on selecting high-efficiency and low-resistance vehicle-mounted PFHXs.

Application of Entransy Theory on Structure Optimization of Serrated Fin in Plate-Fin Heat Exchanger

Thermal Design of Large Plate-Fin Heat Exchanger for Cryogenic Air Separation Unit Based on Multiple Dynamic Equilibriums

Segmented Design of Performance Enhancement for Large Plate Fin Heat Exchanger of Cryogenic Air Separation Unit

Multi-parameter Optimization of Serrated Fins in Plate-Fin Heat Exchanger Based on Fluid-Structure Interaction

Multi-Objective Optimization of Serrated Fin in Plate-Fin Heat Exchanger by Fluid Structure Interaction

Sensitivity and Stress Analysis of Serrated Fin Structure in Plate-Fin Heat Exchanger on Cryogenic Condition

Optimization Investigation on Configuration Parameters of Serrated Fin in Plate-Fin Heat Exchanger Using Genetic Algorithm

Configuration Parameters Design and Optimization for Plate-Fin Heat Exchangers with Serrated Fin by Multi-Objective Genetic Algorithm

Optimization Analysis of Thermodynamic Characteristics of Serrated Plate-Fin Heat Exchanger

Application of Entransy-Dissipation-based Thermal Resistance for Performance Optimization of Spiral-Wound Heat Exchanger

Optimization Investigation on Configuration Parameters of Sine Wavy Fin in Plate-Fin Heat Exchanger Based on Fluid Structure Interaction Analysis

Enhancing Plate-Fin Heat Exchanger Hydraulic Thermal Performance Through Air-Side Fin Optimization Based on Pseudo-3D Topology Optimization

Thermal Design and Optimization of Plate-Fin Heat Exchangers Based Global Sensitivity Analysis and NSGA-II

Performance Evaluation of Heat Transfer Enhancement for Offset Strip Fins Used in Plate-Fin Heat Exchangers

Optimization of Fin Geometry in Heat Convection with Entransy Theory

Multi-Object Tradeoff Optimization of Heat Transfer and Fluid Friction for Plate-Fin Heat Exchanger

Numerical Study of Fluid Flow and Heat Transfer in Plate-Fin Heat Transfer Exchanger of Htgr

Performance Evaluation of Heat Transfer Enhancement in Plate-fin Heat Exchangers with Offset Strip Fins

Optimization Design for Offset Fin in Plate Heat Exchanger with Genetic Algorithm

Effect of Fin Types and Prandtl Number on Performance of Plate-Fin Heat Exchanger: Experimental and Numerical Assessment

Exploration and numerical study of new structures for high-efficiency and low-resistance vehicle-mounted plate-fin heat exchanger based on the three-field synergy principle