Abstract:It has been reported that the pavement performance predicted by the current mechanistic-empirical pavement design shows low or no sensitivity to subgrade and unbound layers. This issue has raised wide attention. Targeting this problem, this paper summarizes the process used by the authors to find better models of the influence of subgrade and unbound base course layers on the performance of flexible and rigid pavements. A comprehensive literature review is first conducted and the findings are categorized. It is found that the resilient modulus, permanent deformation, shear strength, and erosion are key factors. In particular, the properties that provide greater sensitivity are (1) the moisture-dependency of the modulus, shear strength, and permanent deformation; (2) stress-dependency of the modulus and permanent deformation; and (3) cross-anisotropy of the modulus. A number of unbound layer/subgrade models have been located and categorized. Three criteria are developed to identify the candidate models in terms of the degree of susceptibility, degree of accuracy, and ease of development. The first two criteria are used to evaluate the collected unbound layer/subgrade models, while associated development and implementation issues are planned as subsequent work. Two models that the authors previously developed are selected as examples to illustrate the improvement of the performance prediction, including the moisture-sensitive, stress-dependent, and cross-anisotropic modulus model for unbound layers and stress-dependent mechanistic-empirical permanent deformation model for unbound base layers. These two models are verified through laboratory tests and numerical simulations. Moreover, they are compared to their counterparts in the AASHTOWare Pavement ME Design. The advantages of accuracy and sensitivity to the operational conditions (e.g. moisture, traffic stress, and load-induced/particle-induced anisotropy) are obvious. In addition to these two models, the development of the shear strength model and erosion model are sketched. The candidate models need further development and implementation, which address issues such as hierarchical inputs, calibration/validation, and implementation. These are the on-going and planned work on this topic to better incorporate the influence of subgrade and unbound layers so as to contribute to the improvement of pavement designs.

Numerical Analysis for the Influence of Saturation on the Base Course of Permeable Pavement with a Novel Polyurethane Binder

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

Inverse Engineering Stress-Dependent Resilient Moduli of Cement-Treated Base Materials in Asphalt Pavements Using Falling Weight Deflectometer

Mechanistic-empirical Models for Better Consideration of Subgrade and Unbound Layers Influence on Pavement Performance

3D Simulation of Deflection Basin of Pavements under High-Speed Moving Loads

Numerical Modeling of Geogrid-Reinforced Flexible Pavement and Corresponding Validation Using Large-Scale Tank Test

In-situ and numerical investigation on the dynamic response of unbounded granular material in permeable pavement

Estimation of Resilient Modulus of Unbound Aggregates Using Performance-Related Base Course Properties

A Mechanistic-Empirical Approach to Quantify the Influence of Geogrid on the Performance of Flexible Pavement Structures

Development of an analytical permeable pavement model for vehicular access areas

Dynamic Analyses of Pipes in Saturated Soil under Traffic Loads

Numerical Analysis of Seepage for Saturated-Unsaturated Pavement Structure Under Rainfall Conditions

Permeable pavement hydraulic optimization by using an analytical-probabilistic model

A Finite Element Model for Simulating Stress Responses of Permeable Road Pavement

Study on Variation of Surface Runoff and Soil Moisture Content in the Subgrade of Permeable Pavement Structure

Development and Validation of a Mechanistic–Empirical Design Method for Permeable Interlocking Concrete Pavement

Modelling the hydraulic performance of open graded asphalt using the discrete element method and computational fluid dynamics

Durability Evaluation of Single-Component Polyurethane-Bonded Porous Mixtures

Numerical Evaluation of Suction Effects and Groundwater Table Variations on Long-Term Pavement Subgrade Performance

Dynamic Response of Saturated Asphalt Pavement Based on Three Dimensional Finite Element Simulation

Experimental and Numerical Study on Response Characteristics of Airport Pavement Subjected to Wetting in Silt Subgrade