Abstract:Pt/CeO2 catalysts with nanoporous structures were prepared by the facile dealloying of melt-spun Al92-XCe8PtX (X = 0.1; 0.3 and 0.5) ribbons followed by calcination. The phase compositions and structural parameters of the catalysts were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and high-resolution transmission electron microscopy (HRTEM). The specific surface area and pore size distribution were characterized by N-2 adsorption-desorption tests. The catalytic properties were evaluated by a three-way catalyst (TWC) measurement system. The results revealed that the dealloyed samples exhibited a nanorod framework structure. The Pt nanoparticles that formed in situ were supported and highly dispersed on the CeO2 nanorod surface and had sizes in the range of 2-5 nm. For the catalyst prepared from the melt-spun Al91.7Ce8Pt0.3 ribbons, the 50% CO conversion temperature (T-50) was 91 degrees C, and total CO could be converted when the temperature was increased to 113 degrees C. An X-ray photoelectron spectroscopy (XPS) test showed that the Pt-0.3/CeO2 sample had a slightly richer oxygen vacancy; and a H-2 temperature-programmed reduction (H-2-TPR) test demonstrated its superior adsorption ability for reduction gas and high content of active oxygen species. The experiments indicated that the catalytic performance could be retained without any attenuation after 130 h when water and CO2 were present in the reaction gas. The favorable catalytic activities were attributed to the high specific areas and small pore and Pt particle sizes as well as the strong interactions between the CeO2 and Pt nanoparticles. The Pt nanoparticles were embedded in the surface of the CeO2 nanorods, inhibiting growth. Therefore, the catalytic stability and water resistance were excellent.

Effects of Ce Content in Precursor Alloys on Catalytic Properties of CeO 2 Nanorods

CeO2 Nanorod-Supported Transition Metal Catalysts Prepared by Dealloying for CO Oxidation

The Preparation and Catalytic Performance of Nanoporous CuO/CeO 2 Composites

The Preparation and Catalytic Properties of Nanoporous Pt/CeO<sub>2</sub> Composites with Nanorod Framework Structures

The Preparation And Catalytic Properties Of Nanoporous Pt/Ceo2 Composites With Nanorod Framework Structures

The Preparation and Catalytic Performance of Nanoporous CuO/CeO<sub>2</sub> Composites

The Microstructural Refinement and Performance Improvement of a Nanoporous Ag/CeO2catalyst for NaBH4oxidation.

Nanoporous Ag–CeO2 Ribbons Prepared by Chemical Dealloying and Their Electrocatalytic Properties

The microstructural refinement and performance improvement of a nanoporous Ag/CeO<sub>2</sub> catalyst for NaBH<sub>4</sub> oxidation

Baize-Like Ceo2 And Nio/Ceo2 Nanorod Catalysts Prepared By Dealloying For Co Oxidation

Rh/CeO2 composites prepared by combining dealloying with calcination as an efficient catalyst for CO oxidation and CH4 combustion

Au/CeO2 nanorods modified by TiO2 through a combining dealloying and calcining method for low-temperature CO oxidation

Influence of cerium precursors on the structure and reducibility of mesoporous CuO-CeO2 catalysts for CO oxidation

Enhancement of the Catalytic Performance for CH3OH Oxidation of Nanoporous Pt by the Addition of Cu and Ce to Precursors

The Effect of Adding CeO2 Nanoparticles to Cu–Ni–Al Alloy for High Temperatures Applications

Morphology effects of nanoscale ceria on the activity of Au/CeO2 catalysts for low-temperature CO oxidation

CeO2 nanorods supported M-Co bimetallic oxides (M = Fe, Ni, Cu) for catalytic CO and C3H8 oxidation

Monolithic Au/CeO2 Nanorod Framework Catalyst Prepared by Dealloying for Low-Temperature CO Oxidation

Calcination temperature effect on CeO2 catalytic activity for soot oxidation: A combined experimental and theoretical approach.

Effect of CeO2 Content on Microstructure and Properties of SiCp/Al-Si Composites Prepared by Powder Metallurgy

Effect of CeO2 morphology on performance of NiO/CeO2 catalyst in combined steam and CO2 reforming of CH4