Abstract:The development of high-capacity adsorbents is pivotal for the removal of antimonite (Sb(III)) and antimonate (Sb(V)) as priority pollutants in water. Herein, a Fe-La-doped biomass carbon adsorbent (Cs/Fe-La) was prepared for efficient removal of both Sb(III) and Sb(V). Cs/Fe-La shows excellent adsorption behavior for both Sb(III) and Sb(V) at 40 °C with a maximum capacity of 498 and 337 mg/g, respectively. Additionally, the antimony adsorption mechanism and the contribution of Cs/Fe-La composition to high capacity were analyzed based on the characterization of physicochemical analysis and adsorption studies, and the pseudo-second-order kinetic model as well as the Langmuir model fit the results well. Remarkably, considering the secondary pollution caused by direct disposal of antimony-containing waste adsorbents, an antimony-enriched waste adsorbent (Cs/Fe-La-SbOx) was used as an anode material for a Li-ion battery. The heat-treated waste adsorbent exhibited good cycling performance with a reversible specific capacity of 833.8 mAh/g after 500 cycles. This work has demonstrated a promising pathway that can achieve the removal and sustainable utilization of antimony simultaneously by minimizing antimony contamination and maximizing the recycling of antimony-enriched adsorbents.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.1c01851?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.1c01851</a>.The preparation of adsorbents and anode materials in a Li-ion battery; equations of adsorption experiments; SEM images of the crab shell before and after removal of Ca and corresponding EDS; nitrogen adsorption/desorption isotherms and pore-size distribution (inset) of Cs/Fe-La; the TGA curve of Cs/Fe-La; XPS survey spectra of Cs/Fe-La before and after adsorption; the summarization table of pseudo-first-order and pseudo-second-order kinetics and intraparticle diffusion model constants for Sb(III) and Sb(V) adsorption, adsorption isotherm constants for Sb(III) and Sb(V) adsorption, and the parameter of RL from the Langmuir model; the diagram of the fixed bed; and performance of Cs/Fe-La as Li-ion battery anodes, including CV curves, discharge/charge profiles, rate performance, and the Nyquist diagram (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c01851/suppl_file/sc1c01851_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Recycling Antimony (III) by magnetic carbon nanospheres: Turning waste to Recoverable catalytic for Synthesis of Esters and Triazoles

The Adsorption Of Sb(Iii) In Aqueous Solution By Fe2o3-Modified Carbon Nanotubes

Enhancing The Removal Of Sb (Iii) From Water: A Fe3o4@Hco Composite Adsorbent Caged In Sodium Alginate Microbeads

Enhanced adsorption for trivalent antimony by nano-zero-valent iron-loaded biochar: performance, mechanism, and sustainability

Efficient removal of antimony by a facile liquid-controlled strategy reinforced hematite-spinel (Fe2O3-MnFe2O4) composite: construction, simulation and practical evaluation

Recent advances in antimony removal using carbon-based nanomaterials: A review

Synthesis of Ce(III)-doped Fe3O4 Magnetic Particles for Efficient Removal of Antimony from Aqueous Solution.

Insights into adsorptive removal of antimony contaminants: Functional materials, evaluation and prospective

[Removal of Antimony from Water by Nano Zero-Valent Iron/Activated Carbon Composites].

Efficient Removal of Trace Antimony(iii) Through Adsorption by Hematite Modified Magnetic Nanoparticles

Ternary NiFeMnOx compounds for adsorption of antimony and subsequent application in energy storage to avoid secondary pollution

Microwell Confined Iron Oxide Nanoparticles in the Honeycomb-like Carbon Spheres for the Adsorption of Sb (III) and Sequential Utilization as a Catalyst

New insight in adsorption of Sb(III)/Sb(V) from waters using magnetic nanoferrites: X-ray absorption spectroscopy investigation

Facile synthesis of nanosheet-assembled γ-Fe2O3 magnetic microspheres and enhanced Sb(III) removal

Antimony Removal by a Magnetic TiO2/SiO2/Fe3O4 Nanosphere and Influence of Model Dissolved Organic Matter

Ultimate Resourcization of Waste: Crab Shell-Derived Biochar for Antimony Removal and Sequential Utilization as an Anode for a Li-Ion Battery

Synthesis of hydrophilic sulfur-doped carbon aerogel microspheres and their mechanism of efficient removal of Sb(III) from aqueous solution

Cellulose nanocrystal-infused polymer hydrogel imbued with ferric-manganese oxide nanoparticles for efficient antinomy removal

Preparation of a novel Fe3O4/HCO composite adsorbent and the mechanism for the removal of antimony (III) from aqueous solution

High capacity adsorption of antimony in biomass-based composite and its consequential utilization as battery anode

Exceptionally-fast Antimony Removal by Hollow Rod Assembly of Fe@MnO2 Nanosheets: Sequential Utilization As Aqueous Alkaline Battery Anode