A Sensitivity Enhanced Sagnac Temperature Sensor Utilizing High Order Modes Interference

Shasha Fang,Xuqiang Wu,Gang Zhang,Shili Li,Wei Liu,Cheng Zuo,Benli Yu

DOI: https://doi.org/10.1109/ICOCN.2019.8934093

2019-01-01

Abstract:A temperature sensor is proposed by splicing a section of thin polarization-maintaining fiber in a Sagnac loop. The temperature sensitivity is enhanced by higher-order modes interference and reaches up to 1.7 nm/square.

What problem does this paper attempt to address?

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

Pathi Munendhar,Lei Zhang,Limin Tong,Shaoliang Yu

DOI: https://doi.org/10.1117/12.2265817

2017-01-01

Abstract:We reported a simple, robust, and highly sensitive temperature sensor using intrinsic Mach-Zehnder interferometer formed by means of bending a tapered microfiber, embedded in polydimethylsiloxane. The outer temperature perturbations modulate the refractive index of the polymer through thermo-optic and thermal expansion effects of the polymer. This leads to a phase difference between interfering guided modes through the bent-microfiber, which ultimately results prominent wavelength shift in the transmission spectrum. The sensor exhibits a linear temperature response with a sensitivity as high as -6.25nm/°C over the temperature range from 24° to 40 °C. The sensitivity of the sensor increases as wavelength increases.
A High Sensitivity Temperature Sensor Based on Balloon-Shaped Bent SMF Structure with Its Original Polymer Coating

Ke Tian,Gerald Farrell,Elfed Lewis,Xianfan Wang,Haidong Liang,Pengfei Wang

DOI: https://doi.org/10.1088/1361-6501/aac992

IF: 2.398

2018-01-01

Measurement Science and Technology

Abstract:A high sensitivity optical fibre temperature sensor is demonstrated based on a balloon-shaped bent single-mode (BSBS) fibre structure where the fibre retains its original protective polymer coating. The BSBS fibre structure can be simply realized by bending a coated straight single-mode fibre into the balloon shape using a section of silica capillary tube. By adjusting the bending radius of the balloon-shaped fibre section, a modal interferometer between the core mode and the coating mode can be effectively implemented at a suitable bending radius. Considering the intrinsically high thermo-optical coefficient and thermal expansion coefficient of the polymer coating, the BSBS fibre structure offers excellent temperature sensing performance. Experimental results show that the temperature sensitivity is as high as -2465 pm degrees C-1 with a resolution of 0.008 degrees C over the temperature range of 20.7 degrees C-31.7 degrees C. Based on its simple fabrication process, very low cost, and experimentally determined high sensitivity coupled with good repeatability, the temperature sensor described in this article could be a competitive candidate in many temperature sensing applications.
High Sensitivity Temperature Sensor with an Avoided-Crossing Based Selective-Filling High Birefringent Photonic Crystal Fiber Sagnac Interferometer.

Jingping Yang,Tingting Han

DOI: https://doi.org/10.1109/access.2018.2864937

IF: 3.9

2018-01-01

IEEE Access

Abstract:We proposed and demonstrated a high sensitivity temperature sensor in an avoided-crossing-based selective-filling photonic crystal fiber (SFPCF) which was designed by selectively filling two symmetrical air holes around the fiber core of an index-guiding PCF with a kind of high index liquid. The avoided-crossing effect caused by the resonant couplings rather than the crossings between the two-high-index-rod modes and the fundamental mode results in unique birefringence characteristics. The temperature response of the modal phase and group birefringence were both calculated in detail. And the phase and group birefringence are highly sensitive to temperature. Then, the transmission characteristics of a Sagnac interferometer (SI) based on the SFPCF were discussed both in theory and in experiments. The experimental results present that the weak mode couplings have no influence on the transmission spectrum of the SFPCF based SI. The interference dips at different wavelengths present distinctive transmission and temperature characteristics. In experiment, the highest temperature sensitivity of −6.9 nm/°C at 36.5°C was achieved.
Optical Fiber Temperature Sensor with Single Sagnac Interference Loop Based on Vernier Effect

Binqing Wu,Chunliu Zhao,Ben Xu

DOI: https://doi.org/10.1109/cleopr.2017.8118631

2017-01-01

Optics and Precision Engineering

Abstract:A novel optical fiber temperature sensor with single sagnac loop based on vernier effect has been proposed. The sensitivity of the sensor enhances obviously based on vernier effect. The experimental temperature sensitivity is -2.147 nm/O which is 13.17 times higher than that of the single sagnac sensor without vernier effect. This sensor has a simple structure and can be applied widely.
High-order LP modes based Sagnac interference for temperature sensing with an enhanced optical Vernier effect

Hongwei Li,Hailiang Chen,Sajid Ullah,Yuxin Li,Ruyue Shi,Zhigang Gao,Chaoyi Liu,Sa zhang,Shuguang Li,Sigang Yang

DOI: https://doi.org/10.1364/oe.521527

IF: 3.8

2024-04-18

Optics Express

Abstract:Hongwei Li, Hailiang Chen, Sajid Ullah, Yuxin Li, Ruyue Shi, Zhigang Gao, Chaoyi Liu, Sa zhang, Shuguang Li, Sigang Yang In this paper, high-order LP modes based Sagnac interference for temperature sensing are proposed and investigated theoretically. Based on ... [Opt. Express 32, 16140-16155 (2024)]

optics
Sensitivity Enhancement of Fiber-Optic Temperature Sensor via Lateral Angled-Offset Splicing

Fang Lin,Xiaopeng Han,Rongwei Zhang,Jiuru Yang

DOI: https://doi.org/10.1109/lpt.2024.3400057

IF: 2.6

2024-05-21

IEEE Photonics Technology Letters

Abstract:In this letter, we report a fiber-optic temperature sensor based on the polarization-maintaining-fiber Sagnac-loop interferometer (PSLI) by the lateral angled-offset splicing. The group-time-delay of transmission of a panda-type polarization-maintaining fiber is investigated, and the optimal angle and lateral-offset of splicing are theoretically and experimentally gained. The results show that the temperature response of PLSI is significantly enhanced owing to high thermal expansion coefficient. Under the state of 45°-angle and 12- m-offset, ~88% improvement of temperature sensitivity is gained and the maximum reaches 3.01 nm/°C with the detection limit of ~0.02°C. Owing to the merits of ease of fabrication and low cost, the proposed sensor is very practical and promising for high-precision temperature-related engineering monitoring.

engineering, electrical & electronic,optics,physics, applied
Ultrasensitive Temperature Sensor with Vernier-effect Improved Fiber Michelson Interferometer.

Yuanfang Zhao,Maolin Dai,Zhenmin Chen,Xuanyi Liu,M. S. Aruna Gandhi,Qian Li,H. Y. Fu

DOI: https://doi.org/10.1364/oe.415857

IF: 3.8

2020-01-01

Optics Express

Abstract:A novel fiber Michelson interferometer (FMI) based on parallel dual polarization maintaining fiber Sagnac interferometers (PMF-SIs) is proposed and experimentally demonstrated for temperature sensing. The free spectral range (FSR) difference of dual PMF-SIs determines the FSR of envelope and sensitivity of the sensor. The temperature sensitivity of parallel dual PMF-SIs is greatly enhanced by the Vernier effect. Experimental results show that the temperature sensitivity of the proposed sensor is improved from −1.646 nm/°C (single PMF-SI) to 78.984 nm/°C (parallel dual PMF-SIs), with a magnification factor of 47.99, and the temperature resolution is improved from ±0.03037°C to ±0.00063°C by optimizing the FSR difference between the two PMF-SIs. Our proposed ultrasensitive temperature sensor is with easy fabrication, low cost and simple configuration which can be implemented for various real applications that need high precision temperature measurement.
Highly-sensitive temperature sensor based on photopolymerized-waveguide embedded Mach-Zehnder interferometer

Jiabin Wang,Xingyu Yang,Yanru Kou,Di Tong,Anzhi Wang,Chong Niu,Haoran Meng,Song Li,Tao Geng,Weimin Sun

DOI: https://doi.org/10.1364/OE.493552

2023-08-14

Abstract:Biology, medicine, and chemistry all rely heavily on highly sensitive optical fiber temperature sensors. To the best of our knowledge, this research introduces a unique design framework for high-performance fiber temperature sensors that helps eliminate the all-fiber interferometers' sensitivity bottleneck. A section of photopolymerized waveguide is embedded in a typical Mach-Zehnder interferomenter framework with multimode fiber-single mode fiber-multimode fiber (MSM) structure. The thermal-optical coefficient (TOC) of the photopolymerized waveguide core, which is created via the fiber-end lithography technique, differs dramatically from that of the resin cladding. Due to the considerable TOC difference, the phase difference between the interfering beams significantly increases as the temperature changes. The fundamental variables affecting temperature sensitivity are conceptually explored and experimentally verified. The suggested device achieves a typical temperature sensitivity of 1.15 nm/ ∘C in the range of 30-100 ∘C, which is about 10 times as high as that of the all-fiber MSM sensors. The suggested designing framework offers a fresh thought for creating high-performing fiber optic temperature sensors.
High-sensitivity Temperature Sensor Based on a Droplet-Like Fiber Circle

Jianglei Xie,Ben Xu,Yi Li,Juan Kang,Changyu Shen,Jianfeng Wang,Yongxing Jin,Honglin Liu,Kai Ni,Xinyong Dong,Chunliu Zhao,Shangzhong Jin

DOI: https://doi.org/10.1364/ao.53.004085

IF: 1.9

2014-01-01

Applied Optics

Abstract:A low-cost yet high-sensitivity temperature fiber sensor is proposed and demonstrated in this paper. A single-mode fiber with coating is simply bent in a droplet-like circle with a radius of several millimeters. The strong bending induces mode interferences between the silica core mode and the excited modes propagating in the polymer coating. Many resonant dips were observed in the transmission spectra and are found to shift to a shorter wavelength with the increase of environmental temperature. Our linear fitting result of the experimental data shows that the proposed sensor presents high temperature sensitivity up to −3.102 nm/°C, which is even comparable with sensors based on selective liquid-filled photonic crystal fibers. Such high temperature sensitivity results from the large thermo-optical coefficient difference between the silica core and the polymer coating. The influence of a circle radius to the sensitivities is also discussed.
A Reliable Anti-Interference Temperature Sensor Based on a Four-Hole Microstructure Optical Fiber Mach-Zehnder Interferometer.

Tonglei Cheng,Wei Liu,Dianchang Song,Bin Li,Zhiyuan Yin,Xinghui Li,Huifang Wang,Xin Yan,Xuenan Zhang,Takenobu Suzuki,Yasutake Ohishi,Fang Wang

DOI: https://doi.org/10.1109/tim.2023.3287257

IF: 5.6

2023-01-01

IEEE Transactions on Instrumentation and Measurement

Abstract:In this article, an in-line Mach-Zehnder interferometer (ILMZI)-based temperature sensor of a sandwich-like composite structure was proposed and experimentally demonstrated. Using simple cleaving and splicing operations, ILMZI was formed by compactly sandwiching a section of four-hole microstructure optical fiber (FHMF) of ultrashort length between two segments of multimode fibers and single-mode fibers in turn. Due to the large thermo-optic coefficient difference between the silica and air modes in FHMF, the sensor achieves a comparable sensitivity of 67.29 pm/degrees C over a wide dynamic range of 20.8 degrees C-100.4 degrees C. Because the sensing area length is only a few hundred micrometers, the long-term stability and anti-interference of the sensor are greatly enhanced. In addition, the large airhole design confines the propagation mode in silica medium by total internal reflection, reducing the interaction between the liquid sample and the sensing element, making the sensor inert to the ambient refractive index. The maximum response deviation of the sensor under microvibration disturbances is 3.51 x 10(-4) nm/degrees C, and the maximum cross-sensitivity under strain disturbances is only 0.0018 degrees C/mu epsilon. The proposed sensor is excellent in performance, easy in fabrication, simple in structure, and low in cost, which can be expected to be used in practical temperature sensing applications without any additional packaging.
Optical fiber temperature sensor with Vernier effect formed by Mach–Zehnder interferometer cascaded Sagnac interferometer based on Hollow-core photonic crystal fiber

Hang Su,Laixu Gao,Zhaorong Zhang,Fanxin Kong,Zhen Dong,Chunlong Zhao,Dehang Xiao,Chunyu Liu

DOI: https://doi.org/10.1016/j.photonics.2022.101085

2022-10-22

Abstract:This research proposes a Mach–Zehnder interferometer (MZI) based on hollow-core photonic crystal fiber (PCF) and a Sagnac interferometer (SI) based on polarization maintaining fiber (PMF). A stable reference interferometer is formed by using PCF which is insensitivity to temperature and the temperature monitoring is realized by using PMF which is sensitivity to temperature. The two interferometers are cascaded through a 3 dB optical fiber coupler to generate the Vernier effect by controlling the lengths of the two fibers, thereby improving the temperature sensitivity of the sensing structure. The length of PCF is 1.22 mm and PMF is 1.65 m, the experimental results show that the highest temperature sensitivity of 12.02 nm/°C is obtained. The proposed sensor not only has ultra-high temperature sensitivity, but also has scarcely response to physical quantities, such as refractive index, strain and so on. This sensor has reduced the generation of cross-talk in the measurement process, and has great application prospects in several fields.
High sensitivity fiber optic temperature sensor based on CTFBG-FPI and vernier effect

Xue-Peng Pan,Cai Sun,Shan-Ren Liu,Bo Wang,Meng-Meng Gao,Qi Guo,Qi-Dai Chen,Hong-Bo Sun,Yong-Sen Yu,Xuepeng Pan,Mengmeng Gao

DOI: https://doi.org/10.1364/ol.496463

IF: 3.6

2023-06-30

Optics Letters

Abstract:A novel high-sensitivity temperature sensor based on a chirped thin-core fiber Bragg grating Fabry–Perot interferometer (CTFBG-FPI) and the Vernier effect is proposed and demonstrated. With femtosecond laser direct writing technology, two CTFBG-FPIs with different interferometric cavity lengths are inscribed inside a thin-core fiber to form a Vernier effect system. The two FPIs consist of two pairs of CTFBGs with a full width at half maximum (FWHM) of 66.5 nm staggered in parallel. The interferometric cavity lengths of the two FPIs were designed to be 2 mm and 1.98 mm as the reference arm and sensing arm of the sensor, respectively. The temperature sensitivity of this sensor was measured to be −1.084 nm/°C in a range of 40–90°C. This sensor is expected to play a crucial role in precision temperature measurement applications.

optics
Sensitivity-Enhanced Fiber Temperature Sensor Based on Vernier Effect and Dual In-Line Mach–Zehnder Interferometers

Zhenru Wang,Chi Liu,Lin Huang,Shanshan Sun,Haiyong Wang,Dexing Yang

DOI: https://doi.org/10.1109/JSEN.2019.2916891

IF: 4.3

2019-09-15

IEEE Sensors Journal

Abstract:A highly sensitive fiber temperature sensor based on in-line Mach-Zehnder interferometers (MZIs) and Vernier effect was proposed and experimentally demonstrated. The MZI was fabricated by splicing a section of hollow core fiber between two pieces of multimode fiber. The temperature sensitivity obtained by extracting envelope dip shift of the superimposed spectrum reaches to 528.5 pm/°C in the range of 0 °C–100 °C, which is 17.5 times as high as that without enhanced by the Vernier effect. The experimental sensitivity amplification factor is close to the theoretical predication (18.3 times).The proposed sensitivity enhancement system employs parallel connecting to implement the Vernier effect, which possesses the advantages of easy fabrication and high flexibility.

Engineering,Materials Science,Physics
Temperature Compensated Fiber Optic Magnetic Sensor Based on the Combination Interference Principle.

Qi Yu,Xuegang Li,Xue Zhou,Xinjie Gao,Riqing Lv,Linh Nguyen,Stephen C. Warren-Smith,Yong Zhao

DOI: https://doi.org/10.1364/ol.456552

IF: 3.6

2022-01-01

Optics Letters

Abstract:In this paper, a highly sensitive temperature compensated fiber optic magnetic field sensor by Sagnac and Mach-Zehnder combination interference (SMZI) is proposed and verified. The sensing structure relies on microstructured exposed core fiber (ECF) filled with ethanol and magnetic fluid (MF). The refractive index of MF and ethanol is affected by the magnetic field and temperature (MFT). SMZI is based on the multimode and birefringence characteristics of ECF. The measurement principle is that the spectra of Sagnac interference and Mach-Zehnder interference have respective sensitivities to the Mil'. The magnetic sensitivity can reach 1.17 nm/mT, and the temperature sensitivity is up to -1.93 nm/degrees C. At the same time, the sensor has good repeatability and low detection limits of 0.41 mT and 0.25 degrees C, respectively. It not only solves the cross-influence of temperature but also makes the spectral analysis more intuitive. The sensor has a broad development prospect in the application of MFT detection. (C) 2022 Optica Publishing Group
Theoretical analysis of Sagnac Interferometer based highly sensitive temperature sensor on photonic crystal fiber

Fazley Rabbi,Tarek Rahman,Abdul Khaleque,Mobassar Rahman,Md. Tarek Rahman,Md. Mobassar Rahman

DOI: https://doi.org/10.1016/j.sbsr.2021.100396

2021-02-01

Abstract:<p>In this paper, a highly sensitive temperature sensor is proposed on the platform of photonic crystal fiber (filled with ethanol) and Sagnac interferometer. The sensing characteristics of the device are analyzed by the finite element method. The results show a high temperature sensitivity of 23.23 nm/°C and − 8.71 nm/°C for the fiber length of 24 cm within the temperature range of 45 °C to 60 °C. In addition, the maximum sensitivity of 29.12 nm/°C and − 18.75 nm/°C can be achieved by limiting the temperature range from 43 °C to 50 °C for the same fiber length. Additionally, the effects of structural parameter variation on sensitivity are graphically represented. At last, refractive index (RI) sensitivity, due to the temperature sensitive liquid, is also calculated and obtained average sensitivities are −72,857 nm/RIU and 45,000 nm/RIU as RI varies from 1.3485 to 1.3515. Due to the above promising results, the proposed device may find potential applications in surrounding environmental temperature detection.</p>

English Else
Optical Fiber Temperature and Torsion Sensor Based on Lyot-Sagnac Interferometer.

Li-Yang Shao,Xinpu Zhang,Haijun He,Zhiyong Zhang,Xihua Zou,Bin Luo,Wei Pan,Lianshan Yan

DOI: https://doi.org/10.3390/s16101774

2016-01-01

Abstract:An optical fiber temperature and torsion sensor has been proposed by employing the Lyot-Sagnac interferometer, which was composed by inserting two sections of high-birefringence (HiBi) fiber into the Sagnac loop. The two inserted sections of HiBi fiber have different functions; while one section acts as the temperature sensitive region, the other can be used as reference fiber. The temperature and twist sensor based on the proposed interferometer structure have been experimentally demonstrated. The experimental results show that the envelope of the output spectrum will shift with the temperature evolution. The temperature sensitivity is calculated to be -17.99 nm/°C, which is enlarged over 12 times compared to that of the single Sagnac interferometer. Additionally, the fringe visibility of the spectrum will change due to the fiber twist, and the test results reveal that the fringe visibility and twist angle perfectly conform to a Sine relationship over a 360° twist angle. Consequently, simultaneous torsion and temperature measurement could be realized by detecting the envelope shift and fringe visibility of the spectrum.
A Temperature Sensor Based on Composite Optical Waveguide

Hongchang Deng,Xiaowen Jiang,Xuxin Huang,Ming Chen,Hongyan Yang,Yu Cheng,Chuanxin Teng,Ronghui Xu,Libo Yuan

DOI: https://doi.org/10.1109/jlt.2022.3141760

IF: 4.7

2022-04-15

Journal of Lightwave Technology

Abstract:We propose a temperature sensor, which consists of a composite optical waveguide (COW) sandwiched between two single mode fibers (SMFs). The COW is formed by side polishing a capillary optical fiber (COF) and filling with polydimethylsiloxane (PDMS). Unlike the conventional fixed sensing structure, the Mach-Zehnder interferometer (MZI) and multimode interferometer (MMI) can be selectively formed by adjusting different fusion splicing parameters, so as to produce a blunt or sharp tapered fusion structure between the SMF and the COF. Because of the high thermo-optic coefficient of PDMS and the high-order modes excited by the tapered fusion structure, the MZI and MMI sensors are very sensitive to temperature. The experimental results show that within the temperature measurement range from 16 C to 80 C, several resonance wavelengths of the MZI and MMI sensors exhibit a remarkable blue shift with the increase of temperature. The maximum temperature sensitivities of the MZI and MMI sensors can reach 0.50 nm C and 0.88 nm C, respectively. The humidity sensitivity of the sensor is 0.10 nmRH. However, in the process of temperature measurement, humidity has little influence on the sensitivity of the sensor. Due to the advantages of compact size, flexible structure, and high sensitivity, the sensor has great application potential in monitoring the changes of environment and living temperature.

engineering, electrical & electronic,optics,telecommunications
Fiber Optic Temperature Sensor With Online Controllable Sensitivity Based on Vernier Effect

Maolin Dai,Zhenmin Chen,Yuanfang Zhao,Xin Mu,Xuanyi Liu,M. S. Aruna Gandhi,Qian Li,Shengzhen Lu,Shen Liu,H. Y. Fu

DOI: https://doi.org/10.1109/jsen.2021.3101572

IF: 4.3

2021-10-01

IEEE Sensors Journal

Abstract:A highly-sensitive temperature sensor with controllable sensitivity based on Vernier effect by cascading a tunable extrinsic Fabry-Perot interferometer (FPI) and a fixed reflective Lyot filter (RLF) is theoretically investigated and experimentally demonstrated. The temperature sensitivity can be tuned by modulating the cavity length of the extrinsic FPI and online monitoring the envelope of superimposed spectrum with optical spectrum analyzer (OSA). The FPI works as the reference arm to tune the temperature sensitivity of the sensing system, while the RLF with 1-meter polarization maintaining fiber (PMF) acts as the sensing probe. Experimental results prove that by changing the cavity length of the FPI, the sensitivities of −3.82 nm/°C, −8.33 nm/°C and −14.63 nm/°C can be achieved. Compared with the single sensing element, the sensitivities are magnified by 3.78, 8.25 and 14.49 times. The proposed temperature sensor is feasible to be applied practically in scenarios which require different temperature sensitivities in demanded temperature detection ranges.

engineering, electrical & electronic,instruments & instrumentation,physics, applied
Sensitivity-enhanced temperature sensor with fiber optic Fabry-Perot interferometer based on vernier effect

Yang Yi,Xu Ben,Liu Ya-Ming,Li Ping,Wang Dong-Ning,Zhao Chun-Liu

DOI: https://doi.org/10.7498/aps.66.094205

IF: 0.906

2017-01-01

Acta Physica Sinica

Abstract:Fiber-optic temperature sensors have gained much attention owing to their intrinsic features of light weight, immunity to electromagnetic interference, and capability for distributed measurement. Especially, temperature sensors based on Fabry-Perot interferometers (FPIs) are attractive owing to their advantages of compact size and convenient reflection measurement. However, due to the low thermal expansion or/and thermo-optic coefficient of fiber, the temperature sensitivities of these sensors are normally low (similar to 10 pm/degrees C or even lower). In order to improve the temperature sensitivity, a device with dual cascaded FPIs is proposed and demonstrated in this paper, which works on vernier effect and exhibits a much higher temperature sensitivity. The device is fabricated by splicing a short segment of large mode area (LMA) fiber to a short segment of capillary tube fused with a section of single-mode fiber to form an extrinsic Fabry-Perot interferometer with a glass cavity cascaded to an intrinsic FPI with a narrow air cavity. By setting the lengths of capillary tube and LMA fiber to allow similar free spectral ranges to be obtained, and superimposing of the reflection spectra of the two FPIs, the vernier effect can be generated. Firstly, the principle of temperature sensing based on vernier effect of this device is analyzed and simulated theoretically, and it is found that the temperature sensitivity can be improved significantly by using vernier effect compared with that of a single FPI with an air-cavity or glass cavity by directly tracing resonant dips/peaks. Then, the temperature responses of the FPI with single air-cavity and dual cascaded cavities are measured, respectively. Experimental results match well with the theoretical analysis carried out. The temperature sensitivity of the proposed sensor is improved greatly from 0.71 pm/degrees C for a single FPI sensor with an air-cavity to 179.30 pm/degrees C by employing the vernier effect. Additionally, the sensor exhibits good repeatability in a temperature range of 100-500. C. The proposed sensor has the advantages of compact size ( < 1 mm in dimension) and high sensitivity, which makes it promising for temperature sensing in a variety of industries, such as food inspection, pharmacy, oil/gas exploration, environment, and high-voltage power systems.
Sensitivity-enhanced temperature sensor based on PDMS-coated long period fiber grating

Qi Wang,Chao Du,Jiaming Zhang,Ri-Qing Lv,Yong Zhao

DOI: https://doi.org/10.1016/j.optcom.2016.05.039

IF: 2.4

2016-01-01

Optics Communications

Abstract:A sensitivity-enhanced temperature sensor based on a poly-dimethylsiloxane (PDMS)-coated long period fiber grating (LPFG) has been proposed and experimentally investigated. By embedding the LPFG in a temperature-sensitive elastomeric polymer, the temperature sensitivity of the proposed sensor could be effectively improved by 4 times higher than those of the conventional bare LPFG sensors due to the high thermo-optic coefficient (TOC) of PDMS. It can be found that the temperature sensitivities of higher-order modes are higher than those of lower-order modes by analyzing transmission spectra characteristics of the sensor. Because of LPFG is sensitive to surrounding refractive index (RI), the PDMS-coated LPFG will have a high temperature sensitivities of 255.4pm/°C in the range of 20–80°C. Due to the high measurement resolution of 0.078°C, the sensor is promising to be applied to the fields that high-precision temperature measurement is required.

A Sensitivity Enhanced Sagnac Temperature Sensor Utilizing High Order Modes Interference

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

A High Sensitivity Temperature Sensor Based on Balloon-Shaped Bent SMF Structure with Its Original Polymer Coating

High Sensitivity Temperature Sensor with an Avoided-Crossing Based Selective-Filling High Birefringent Photonic Crystal Fiber Sagnac Interferometer.

Optical Fiber Temperature Sensor with Single Sagnac Interference Loop Based on Vernier Effect

High-order LP modes based Sagnac interference for temperature sensing with an enhanced optical Vernier effect

Sensitivity Enhancement of Fiber-Optic Temperature Sensor via Lateral Angled-Offset Splicing

Ultrasensitive Temperature Sensor with Vernier-effect Improved Fiber Michelson Interferometer.

Highly-sensitive temperature sensor based on photopolymerized-waveguide embedded Mach-Zehnder interferometer

High-sensitivity Temperature Sensor Based on a Droplet-Like Fiber Circle

A Reliable Anti-Interference Temperature Sensor Based on a Four-Hole Microstructure Optical Fiber Mach-Zehnder Interferometer.

Optical fiber temperature sensor with Vernier effect formed by Mach–Zehnder interferometer cascaded Sagnac interferometer based on Hollow-core photonic crystal fiber

High sensitivity fiber optic temperature sensor based on CTFBG-FPI and vernier effect

Sensitivity-Enhanced Fiber Temperature Sensor Based on Vernier Effect and Dual In-Line Mach–Zehnder Interferometers

Temperature Compensated Fiber Optic Magnetic Sensor Based on the Combination Interference Principle.

Theoretical analysis of Sagnac Interferometer based highly sensitive temperature sensor on photonic crystal fiber

Optical Fiber Temperature and Torsion Sensor Based on Lyot-Sagnac Interferometer.

A Temperature Sensor Based on Composite Optical Waveguide

Fiber Optic Temperature Sensor With Online Controllable Sensitivity Based on Vernier Effect

Sensitivity-enhanced temperature sensor with fiber optic Fabry-Perot interferometer based on vernier effect

Sensitivity-enhanced temperature sensor based on PDMS-coated long period fiber grating