Abstract:Weight reduction and advanced cooling schemes to improve aircraft engine efficiency drive the design of turbine blades toward thin-walled structures. The decrease of wall thickness leads to a decrease of creep rupture life and/or the increase of creep rate, which is termed as the thickness debit effect. To capture the nature of this effect and improve the reliability of turbine blades, creep tests at 1100 degrees C/130 MPa are carried out on sheet samples of a Ni-based single crystal superalloy with thicknesses from 0.60 to 2.17 mm. The creep rupture life is found to decrease with the decrease of sample thickness linearly, exhibiting an obvious thickness debit effect. The analysis of the microstructure evolution demonstrates that the rafting mechanism of the gamma' phase of all samples remains the same (i.e. stress-induced, diffusion-controlled process) and is independent of the sample thickness. The fracture morphology reveals that the fracture mechanism of thin sample is a mixed fracture including micro voids and cleavage-like planes, while that of thick sample is micro voids-dominated. Environmental degradation suggests that surface damage due to oxidation and nitridation is not the primary causes for thickness debit effect, yet promotes the effect integrally. Finite element analyses and the observed dislocation configurations reveal that the thin sample is in a plane stress state, that activates six slip systems of the type {111}< 110 > and one slip system of the type {111}< 112 > during creep, while the thick sample is close to the ideal uniaxial stress state which activates all possible eight slip systems of the type {111}< 110 > and two slip systems of the type {111}< 112 >. Less slip systems activated in thin sample induce less work hardening, which results in heterogeneous deformation and shorter rupture life.

Thickness Debit Effect in Ni-based Single Crystal Superalloys at Different Stress Levels

Thickness Influence on the Creep Response of DD6 Ni-Based Single-Crystal Superalloy

Inconsistent creep between dendrite core and interdendritic region under different degrees of elemental inhomogeneity in nickel-based single crystal superalloys

Stress State Mechanism of Thickness Debit Effect in Creep Performances of a Ni-based Single Crystal Superalloy

Prediction Method for Creep Life of Thin-Wall Specimen with Film Cooling Holes in Ni-based Single-Crystal Superalloy

Microstructure Evolution Mechanisms in Nickel-Based Single Crystal Superalloys under Multiaxial Stress State

Investigation on Microstructure Evolution and Fracture Morphology of Single Crystal Nickel-Base Superalloys under Creep-Fatigue Interaction Loading

Environmental Effects on the Creep Response of Thin-Walled Ni-Based Single Crystal Superalloys

The Effect of Stress State on Rafting Mechanism and Cyclic Creep Behavior of Ni-base Superalloy

The Effects of Stress Triaxiality, Temperature and Strain Rate on the Fracture Characteristics of a Nickel-Base Superalloy

Diffusing Analysis of Matrix Γ in Nickel-base Single Crystal Superalloy During Different Stress Creep

Creep damage and crack initiation behaviour of nickel-base single crystalline superalloys compact tension specimen with a void ahead of crack tip

Thickness Debit Effect in Creep Performance of a Ni3Al-Based Single-Crystal Superalloy with [001] Orientation

Stress Redistribution and Stress Triaxiality Effect on the Fatigue Life of Notched Ni-based Single Crystal Superalloy at 760℃

Creep Damage Mechanism and Γ′-Phase Morphology of a V-notched Round Bar in Ni-based Single Crystal Superalloys

Effects of Microstructure and Lattice Misfit on Creep Life of Ni-based Single Crystal Superalloy During Long-Term Thermal Exposure

Effect of the Withdrawal Rate on the Microstructure and Creep Behavior of the Directionally Solidified Nickel-Based Superalloy

Creep-fatigue Behavior of Nickel-Based Single Crystal Superalloy with Different Orientations: Experimental Characterization and Multi-Scale Simulation

Creep Residual Life Prediction of a Nickel-Based Single Crystal Superalloy Based on Microstructure Evolution

Anisotropic Creep Damage and Fracture Mechanism of Nickel-Base Single Crystal Superalloy under Multiaxial Stress

Based on Damage Caused by Microstructure Evolution During Long-Term Thermal Exposure to Analyze and Predict Creep Behavior of Ni-based Single Crystal Superalloy