Abstract:Tungsten fiber-reinforced tungsten composite (Wf/W) material is considered a plasma-facing material (PFM) with good application prospects. Commercial tungsten wire (fiber) prepared through forging and drawing processes has excellent mechanical properties, as well as a very high recrystallization temperature due to the unique texture of it grain structure. Commercial tungsten fiber is the most proper reinforcement for Wf/W. The change in the properties of tungsten fiber because of neutron irradiation makes it inevitable for Wf/W to be used as PFMs. However, there is very little research on the change in the properties of tungsten fiber caused by neutron irradiation. In this work, we used heavy ion irradiation to simulate the displacement damage generated by neutron irradiation to explore the alteration of the properties of a commercial tungsten fiber caused by neutron irradiation. The investigated subject was tungsten fiber with a diameter of 300 μm. The irradiation source was 7.5 MeV Au2+, which generated a maximum displacement damage of 60 dpa at a depth of 400 nm, and the irradiation influenced depth was 1000 nm. Because of the irradiation, significant lattice distortion occurred within the tungsten fiber, resulting in the transition from (110) texture to (100) texture at the fiber’s cross-section. The results of the Schmidt factor and Taylor factor analysis indicate a decrease in the plasticity of the tungsten fiber after irradiation, but it did not completely lose its plasticity. The results of the nanoindentation test confirmed the radiation hardening. After irradiation, the hardness of the tungsten fiber increased by approximately 0.33 GPa, but this increase was relatively small compared to other tungsten-based materials. This indicates that commercial tungsten fiber is a low-cost and highly reliable reinforcement material for Wf/W composite materials.

Evolution of Microstructure and Nanohardness of SiC Fiber-Reinforced SiC Matrix Composites under Au Ion Irradiation

Irradiation Effects of Carbon Fibers in C/SiC Composites

The Microstructural and Hardness Changes of Tungsten Fiber after Au2+ Irradiation

Evolution of microstructure and mechanical properties of SiCf/SiC composites induced by He ions irradiation at various temperatures

Irradiation Effects on Amosic-3 Silicon Carbide Composites by Si Ions Implantation

Microstructure Response of Amosic-3 SiC/SiC Composites under Self-Ion Irradiation

Effects of Silicon Ion Irradiation on the Interface Properties of SiCf/SiC Composites

Microstructural Evolution of Silicon Carbide Fiber under Argon Ion Irradiation at Room Temperature

Micromechanical Properties and Microstructural Evolution of Amosic-3 SiC/SiC Composites Irradiated by Silicon Ions

Structural Evolution in ZrC-SiC Composite Irradiated by 4 MeV Au Ions

Enhanced Irradiation Resistance and Thermal Conductivity of SiC Induced by the Addition of Carbon under Au2+ Ion Irradiation

The Microstructure Evolution in a SiCf/SiC Composite under Triple Ion Beam Irradiation

Microstructure characteristics of C+ and He+ irradiated SiCf/SiC composites before and after annealing

Microstructural Evolution of Polymer Derived SiC Ceramics and SiC/SiC Composite under 1.8MeV Electron Irradiation

Microstructure Damage in Silicon Carbide Fiber Induced by 246.8-Mev Ar-ion Irradiation

Evolution of amorphization and nanohardness in SiC under Xe ion irradiation

Grain growth of nanocrystalline 3C-SiC under Au ion irradiation at elevated temperatures

Effects of ion irradiation on microstructures and mechanical properties of SiOC nanocomposites

Microstructure Evolution of the Interface in SiCf/TiC-Ti3SiC2 Composite under Sequential Xe-He-H Ion Irradiation and Annealing Process

The microstructure and physical properties of AlN and SiC ceramics after irradiation with 2 MeV Au ions

Hardness variation in nanocrystalline SiC irradiated with heavy ions