Abstract:Trace water, one of the most common impurities, has a fatal influence on the performance of lithium-ion batteries (LIBs). In this work, the influences of water content on the solvation structure of lithium ions and the component of solid electrolyte interphase (SEI) film in the lithium bis(oxalato)borate (LiBOB)–ethylene carbonate (EC)/diethyl carbonate electrolyte (DEC) system are studied. Results of attenuated total reflection–Fourier transform infrared analysis and density functional theory (DFT) calculation show that a great number of solvation structures of Li+(EC)2(H2O)2 and Li+(EC)3(H2O) are formed in the electrolyte system with additional H2O. Besides, the free H2O generated by the desolvation effect will react with the desolvated Li+ ions and the heterogeneous organic components in the outer layer of a SEI film. These parasitic reactions will lead to an overgrown and excessive inorganic component-containing SEI film, which harms the Li+ ion conductive characteristics of the SEI film and the electrochemical performance of LIBs. In particular, insoluble LiB(C2O4)(OH)2 and B(C2O4)OH products are generated when the content of the additional H2O reaches 10,000 ppm because of the hydrolytic reaction. Moreover, it is because of the generation of these poor ion-conductive boron-containing substances that the impedance of the cell increases sharply. These studies can provide the theoretical basis for battery failure analysis.This article has not yet been cited by other publications.

What problem does this paper attempt to address?

The paper primarily explores the impact of trace amounts of moisture on the solid electrolyte interface (SEI) film of lithium-ion batteries and its mechanism of action. The study found that trace amounts of moisture can severely affect the performance of lithium-ion batteries. Specifically: 1. **Moisture affects the solvation structure and SEI film composition**: In an electrolyte system containing lithium bis(oxalato)borate (LiBOB) with ethylene carbonate (EC)/diethyl carbonate (DEC), the addition of extra moisture leads to the formation of a large number of Li+(EC)2(H2O)2 and Li+(EC)3(H2O) solvation structures. The free water molecules in these structures undergo side reactions with desolvated lithium ions and heterogeneous organic components on the outer layer of the SEI film. 2. **Side reactions lead to SEI film thickening**: The aforementioned side reactions cause excessive growth of the SEI film and increase the content of inorganic components, which impairs the lithium-ion conductivity of the SEI film and reduces the electrochemical performance of the lithium-ion battery. 3. **Special impact when moisture content reaches 10,000 ppm**: When the added moisture content reaches 10,000 ppm, hydrolysis reactions produce insoluble LiB(C2O4)(OH)2 and B(C2O4)OH products. These substances have poor ionic conductivity, leading to a sharp increase in battery impedance. 4. **Reasons for the decline in electrochemical performance**: When the additional moisture content does not exceed 1,000 ppm, the deterioration of the SEI film is mainly due to its excessive growth and the presence of too many inorganic components. However, when the moisture content reaches 10,000 ppm, the formation of insoluble boron compounds becomes the main reason for the significant increase in impedance. In summary, this study reveals the negative impact of moisture on the SEI film of lithium-ion batteries and its mechanism of action through experiments and theoretical calculations. This is of great significance for understanding battery failure mechanisms and improving the performance of lithium-ion batteries.

Influences and Mechanisms of Water on a Solid Electrolyte Interphase Film for Lithium-Ion Batteries

Intercalated Water and Organic Molecules for Electrode Materials of Rechargeable Batteries

Atomistic Insights into the Thermal Transport Properties of Inorganic Components of Solid Electrolyte Interphase (SEI) in Lithium-Ion Batteries

Effect of Water Concentration in LiPF6-Based Electrolytes on the Formation, Evolution, and Properties of the Solid Electrolyte Interphase on Si Anodes

The influence of water in electrodes on the solid electrolyte interphase film of micro lithium-ion batteries for the wireless headphone

Influence of Water Contamination on the SEI Formation in Li-Ion Cells: An Operando EQCM-D Study

Perception of insight in the formation of solid electrolyte interphase

Fundamental Understanding of Water‐Induced Mechanisms in Li–O2 Batteries: Recent Developments and Perspectives

Revealing the critical effect of solid electrolyte interphase on the deposition and detriment of Co(II) ions to graphite anode

Controlling Intermolecular Interaction and Interphase Chemistry Enabled Sustainable Water‐tolerance LiMn2O4||Li4Ti5O12 Batteries

Thermal stability of solid electrolyte interphase of lithium-ion batteries

Engineering a Dynamic Solvent-Phobic Liquid Electrolyte Interphase for Long-Life Lithium Metal Batteries

Controlling Intermolecular Interaction and Interphase Chemistry Enabled Sustainable Water-tolerance LiMn2 O4 ||Li4 Ti5 O12 Batteries

Effects of Electrolyte Solvent Composition on Solid Electrolyte Interphase Properties in Lithium Metal Batteries: Focusing on Ethylene Carbonate to Ethyl Methyl Carbonate Ratios

An Overcrowded Water-Ion Solvation Structure for a Robust Anode Interphase in Aqueous Lithium-Ion Batteries

Regulating Interfacial Chemistry in Lithium-Ion Batteries by a Weakly Solvating Electrolyte**

Regulating the composition distribution of layered SEI film on Li-ion battery anode by LiDFBOP

Unraveling the role of LiODFB salt as a SEI-forming additive for sodium-ion battery

Unraveling the Hydrolysis Mechanism of LiPF6 in Electrolyte of Lithium Ion Batteries.

In Situ Realization of Water‐Mediated Interfacial Processes at Nanoscale in Aprotic Li–O 2 Batteries

Effects of H2O on Improving the Performance of a Solid Composite Electrolyte Fabricated via an Air-Processable Technique