Abstract:Precision calorimetry using highly granular sampling calorimeters is being developed based on the particle flow concept within the CALICE collaboration. One design option of a hadron calorimeter is based on silicon photomultipliers (SiPMs) to detect photons generated in plastic scintillator tiles. Driven by the need of automated mass assembly of around ten million channels stringently required by the high granularity, we developed a design of scintillator tiles directly coupled with surface-mounted SiPMs. A cavity is created in the center of the bottom surface of each tile to provide enough room for the whole SiPM package and to improve collection of the light produced by incident particles penetrating the tile at different positions. The cavity design has been optimized using a GEANT4-based full simulation model to achieve a high response to a Minimum Ionizing Particles (MIP) and also good spatial uniformity. The single-MIP response for scintillator tiles with an optimized cavity design has been measured using cosmic rays, which shows that a SiPM with a sensitive area of only $\mathbf{1\times1~mm^2}$ (Hamamatsu MPPC S12571-025P) reaches a mean response of more than 23 photon equivalents with a dynamic range of many tens of MIPs. A recent uniformity measurement for the same tile design is performed by scanning the tile area using focused electrons from a $\mathbf{^{90}Sr}$ source, which shows that around 97% (80%) of the tile area is within 90% (95%) response uniformity. This optimized design is well beyond the requirements for a precision hadron calorimeter.

Optimization study of scintillator shape of electromagnetic calorimeter for Higgs factories

Preliminary optimization study on the PFA-based GSHCAL for the CEPC

Highly Granular Scintillator-Strip Electromagnetic Calorimeter for Future Higgs Factories

Performance optimization for a scintillating glass electromagnetic calorimeter at the EIC

A Design of Scintillator Tiles Read Out by Surface-Mounted SiPMs for a Future Hadron Calorimeter

PFA Oriented ECAL Optimization for the CEPC

Optimization of layer composition for ILD ECAL

Comparative Study of NaI,BGO,LSO,GSO and YSO Scintillators Using Monte Carlo Simulations

Monte Carlo Simulation of CsI(Tl) Scintillator Detector with GEANT4 ToolKit

Directional light outcoupling enhancement of scintillators via hollow microlens arrays

A Study of Sensitive Elements of CEPC-AHCAL

Scintillator Strip ECAL Optimization

A Design of Hadronic Calorimeter for DarkSHINE Experiment

Longitudinal structure optimization for the high density electromagnetic calorimeter

Progress of Inorganic Scintillators for Future HEP Experiments

A Novel High Dynamic-Range SiPM for Scintillator-Based Hadronic Calorimetry

Optical Optimization for Anti-Coincidence Detectors of a Hard X-ray Modulation Telescope

An Optimized Prototype Of Electromagnetic Calorimeter For The Solid Project At Jefferson Lab

Design optimization of JUNO-TAO plastic scintillator with WLS-fiber and SiPM readout

Scintillator Tile Batch Test of CEPC AHCAL