Abstract:The interactions between coherent Cu precipitates with different sizes (0.5-2.5 nm) and a 1/2(111){ 110 } edge dislocation in α-Fe matrix have been investigated by molecular dynamics method (MD).Moreover,the impacts of temperatures (100-600 K) and different interaction positions for the interaction of precipitates and dislocations have been further explored.It is found that the increase of precipitates size enhances obstacle strength for dislocation glide.The reason is that the increase of precipitates diameter will increase the intercept area when dislocations pass through precipitates of different sizes.However,the rise of temperature causes the reducing of obstacle strength.By comparison,increasing precipitates diameters from 1.0 nm to 2.0 nm,critical shear stress of systems under different temperature rise by an average of 0.096 Gb/L.And when the temperature is increased from 100 K to 600 K,the critical shear stress of systems containing Cu precipitates with diameters of 1-2 nm reduces by an average of 0.049 Gb/L.The results qualitatively indicate that the effect of precipitates size plays a more important role in obstacle strength of precipitates for dislocation glide than temperature.When dislocation passes through precipitates at different sites,the precipitate whose center plane is on the dislocation glide plane is found to be the strongest obstacle.When the glide plane is the same vertically far away from the center plane of precipitates,the precipitates whose center planes are below the glide planes are stronger obstacles than those above the glide planes.The bigger contribution from the interaction between the tensile stress field below the dislocation glide plane and compressive stress field of Cu precipitate resultes in stronger hindrance for the dislocation movement.

Molecular Dynamics Simulation of Strengthening Dependence on Precipitate Cr Composition in Fe-15at.%Cr Alloy.

Molecular Dynamics Simulation of Interaction Between Edge Dislocations and Stable Beta-Phase Precipitates in Aluminum Alloy

Predicting Yield Stress in a Nano-Precipitate Strengthened Austenitic Steel by Integrating Multi Length-Scale Simulations and Experiments

The Effect of Nano-precipitates on Strength in a Micro-alloyed Ferritic Steel

The Influence of Cr Addition on the Microstructure and Mechanical Properties of Fe-25Mn-10Al-1.2C Lightweight Steel

The Contribution of Cu Precipitates to Hardening in α-Fe Matrix

A micromechanical study on the effects of precipitation on the mechanical properties of CoCrFeMnNi high entropy alloys with various annealing temperatures

In-situ TEM study of the dynamic interactions between dislocations and precipitates in a Cu-Cr-Zr alloy

Atomistic Simulation of Interactions Between an Edge Dislocation and Cu Precipitates with Different Chemical Compositions in Α-Fe

Effect of Cr on the phase transformation and interphase nanoprecipitation behaviours of high-strength microalloyed steels

Cr-promoted Formation of B2+L21 Composite Nanoprecipitates and Enhanced Mechanical Properties in Ferritic Alloy

Molecular Dynamics Simulation Research on Fe Atom Precipitation Behaviour of Cu-Fe Alloys during the Rapid Solidification Processes

On the strengthening effect of Al-Cr-Si dispersoid in an Al-Si-Mg-Cu casting alloy with Cr addition

The influence of Cr content on the mechanical properties of ODS ferritic steels

Cr-promoted formation of B2+L2 1 composite nanoprecipitates and enhanced mechanical properties in ferritic alloy

Molecular dynamics study on the strengthening mechanisms of Cr–Fe–Co–Ni high-entropy alloys based on the generalized stacking fault energy

Molecular Dynamics Study: Effects of He Bubble and Cr Precipitate on Tensile Deformation of Grain Boundaries in $\alpha$ -Fe

Microstructures, Mechanical Properties and Deformation of Near-Rapidly Solidified Low-Density Fe-20Mn-9Al-1.2C-xCr Steels

The effect of Cr content on intragranular κ-carbide precipitation in Fe-Mn-Al-(Cr)-C low-density steels: A multiscale investigation

Accelerating Matrix/boundary Precipitations to Explore High-Strength and High-Ductile Co34Cr32Ni27Al3.5Ti3.5 Multicomponent Alloys Through Hot Extrusion and Annealing

Cr-induced Morphology Change of Primary Mn-rich Phase in Al-Si-Cu-Mn Heat Resistant Aluminum Alloys and Its Contribution to High Temperature Strength