Abstract:The human hand plays a role in a variety of daily activities. This intricate instrument is vulnerable to trauma or neuromuscular disorders. Wearable robotic exoskeletons are an advanced technology with the potential to remarkably promote the recovery of hand function. However, the still face persistent challenges in mechanical and functional integration, with real-time control of the multiactuators in accordance with the motion intentions of the user being a particular sticking point. In this study, we demonstrated a newly-designed wearable robotic hand exoskeleton with multijoints, more degrees of freedom (DOFs), and a larger range of motion (ROM). The exoskeleton hand comprises six linear actuators (two for the thumb and the other four for the fingers) and can realize both independent movements of each digit and coordinative movement involving multiple fingers for grasp and pinch. The kinematic parameters of the hand exoskeleton were analyzed by a motion capture system. The exoskeleton showed higher ROM of the proximal interphalangeal and distal interphalangeal joints compared with the other exoskeletons. Five classifiers including support vector machine (SVM), K-near neighbor (KNN), decision tree (DT), multilayer perceptron (MLP), and multichannel convolutional neural networks (multichannel CNN) were compared for the offline classification. The SVM and KNN had a higher accuracy than the others, reaching up to 99%. For the online classification, three out of the five subjects showed an accuracy of about 80%, and one subject showed an accuracy over 90%. These results suggest that the new wearable exoskeleton could facilitate hand rehabilitation for a larger ROM and higher dexterity and could be controlled according to the motion intention of the subjects.

Variable Impedance Control of Finger Exoskeleton for Hand Rehabilitation Following Stroke

Adaptive CPG-Based Impedance Control for Assistive Lower Limb Exoskeleton

Variable Force Tracking Control Via Online Learning

Contacting mechanical impedance of human finger based on uncertain system

A Novel Variable Stiffness Compliant Finger Exoskeleton for Rehabilitation Based on Electromagnet Control.

Finger-Individuating Exoskeleton System with Non-Contact Leader-Follower Control Strategy

Position/force evaluation-based assist-as-needed control strategy design for upper limb rehabilitation exoskeleton

A Grasp Strategy with Flexible Contacting for Multi-fingered Hand Rehabilitation Exoskeleton

A Novel Robotic Exoskeleton for Finger Rehabilitation: Kinematics Analysis

The Application of Learning Impedance Control to Exoskeleton Arm

Human-machine Interaction Force Control: Using a Model-Referenced Adaptive Impedance Device to Control an Index Finger Exoskeleton

Design of an Active and Passive Control System of Hand Exoskeleton for Rehabilitation

Human Finger Mechanical Impedance Modeling: Using Multiplicative Uncertain Model

Mechanical Design and Analysis of the End-Effector Finger Rehabilitation Robot (EFRR) for Stroke Patients

Impedance Control of a 2-DOF Spherical 5-Bar Exoskeleton for Physical Human-Robot Interaction During Rehabilitation and Assessment

Neural learning impedance control of lower limb rehabilitation exoskeleton with flexible joints in the presence of input constraints

Fuzzy-adaptive Impedance Control of Upper Limb Rehabilitation Robot Based on Semg.

Fuzzy-based impedance regulation for control of the coupled human-exoskeleton system

Control of Newly-Designed Wearable Robotic Hand Exoskeleton Based on Surface Electromyographic Signals

An Attention-Controlled Hand Exoskeleton for the Rehabilitation of Finger Extension and Flexion Using a Rigid-Soft Combined Mechanism

Adaptive Neural Network Control for a Lower-Limb Exoskeleton Using Variable Stiffness Transferring